Gr 10 Weld Met ATP 2023 24

2023-24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING AND METALWORK): GRADE 10 2023-24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING AND METALWORK): GRADE 10 (TERM 1) TERM 1 WEEK 1 WEEK 2 WEEK 3 WEEK 4 WEEK 5 WEEK 6 WEEK 7 WEEK 8 WEEK 9 WEEK 10-11 CAPS TOPICS SAFETY (GENERIC) SAFETY (GENERIC) TERMINOLOGY (WELDING) TERMINOLOGY (WELDING) TERMINOLOGY TERMINOLOGY TOOLS (GENERIC) TOOLS (GENERIC) PAT REVISION AND (SPECIFIC) (SPECIFIC) (WELDING) (WELDING) CONSOLIDATION ASSESSMENT (SPECIFIC) (SPECIFIC) TOPICS, • Organise and manage Identify safe and hazardous Explain the following terms Templates: Principles and Electrical aspects Basic tools and Application of Marking off, Assignment CONCEPTS, activities responsibly and acts and conditions e.g., with the aid of sketches: Materials used for template: functions of: regarding arc equipment: measuring and Cutting, drilling SKILLS AND effectively, including self- speed of emery wheels, etc. welding: marking-off and bending: VALUES management and HIV, • Arc • Wood, cardboard • Arc welding • Spanners: ring-, instruments: Apply personal hygiene machines, such as Explain the flat- and Dustpan Aids awareness. measures: • Arc length • steel and hardboard AC and DC following: combination- • Steel Rule Square • Safety precautions considered during • Refer specifically to the • Leg length • Principle of simple setting- • Arc welding • Volts • Sockets and • Scriber performance-based following tools, machines, • Included angle out of the right angle and accessories accessories equipment (refer to Topic 2: • Current (Ampere) • Tape measure activities to avoid injuries the application of Tools) • Parent metal Pythagoras’ theory • Resistance • Pliers or incidents. • Combination set • Explain his, her rights, • Compressors • Penetration Practical: • Polarity • Hammers human rights, contributions • Punches and responsibilities. • Fire extinguishing apparatus • Reinforcement Do calculations on the theorem • Arc voltage • Chisels, Practical: of Pythagoras and apply the hacksaws, Understanding of the OHSA Practical: • Root principle by setting a right- • Direct current Use the marking-off Learners must be fully aware of • Identify safe and hazardous angled project. • Screwdrivers plate from Topic • Root face • Alternating current “Tools” and drill and all the safety precautions to be acts and conditions (e.g., • Allen keys taken during performance- speed of emery wheels, • Root run • Earthing tap two (2) holes. based activities, to avoid maximum lift on hydraulic • Files injuries or incidents. equipment etc.) • Run • Single phase • Stocks and dies Refer specifically to the • Apply personal hygiene • Tack welding • Three phase following tools, machines, measures. • Toe of weld • Voltage drop equipment: Note: Clean workshop on a weekly basis. First Aid HIV, • Weld bead Practical: • Different hand tools Aids Awareness • Welding voltage Demonstrate an • Pedestal drill understanding of arc • Welding current welding equipment • Bench grinder by assembling the • Welding heat • Guillotine equipment in the Practical: correct sequence. • Bending machine Explain the welding terms by • Power saws means of sketches RESOURCES OHS act, safety signs in workshop, first aid manuals and hand Tools and equipment as mentioned above. Tools and equipment as mentioned above. TO ENHANCE tools and equipment LEARNING SBA (FORMAL) PAT Phase 1 and Assignment The Occupational Health and Safety Act, Act 85 of 1993, as amended, read with the Hazardous Biological Agents Regulations. Section 8 (1) of the Occupational Health and Safety (OHS) Act, Act 85 of 1993, Safe work practices are types of administrative controls that include procedures for safe and proper work used to reduce the duration, frequency, or intensity of exposure to a hazard. Examples of safe work practices for SANS. Requiring regular hand washing or using of alcohol-based hand rubs. Learners and teachers should always wash hands when they are visibly soiled and after removing any PPE. Keep safe distances and always wear a mask. See the document on the workshop safety measures. Downloaded from hlayiso.com 1

2023-24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING AND METALWORK): GRADE 10 2023-24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING AND METALWORK): GRADE 10 (TERM 2) TERM 2 WEEK 1 WEEK 2 WEEK 3 WEEK 4 WEEK 5 WEEK 6 WEEK 7-8 WEEK 9 WEEK 10 WEEK 11 CAPS TOPICS JOINING METHODS (GENERIC) FORCES (GENERIC) TERMINOLOGY (WELDING SYMBOLS AND JOINTS) PAT REVISION AND CONSOLIDATION ASSESSMENT TOPICS, CONCEPTS, Calculations on the size Semi-permanent joining Forces: Moments: Stress (Basic calculations Identifying the different Theory and application of Dustpan Control test SKILLS AND VALUES of drills and key methods: Differentiate between the Moments found in on): Welding Symbols: permanent joints (Arc Semi-permanent dimensions: • Bolts different types of forces engineering components • Square bar Elements of welding symbols welding): joining methods • Drill sizes for screw • Studs found in engineering (basic calculations): • Round bar • Lap joint cutting components: Definition: • Butt joint • Locking devices Practical: • Width, thickness and • Pulling force (Tensile) Moment = force x • T-joint length of keys • Nuts, split pins Calculations to determine: • Compressive force perpendicular distance • Edge • Rivets (Spanner used to tighten a • Forces, • Shearing force • Corner Keys – Identification, nut or bolt) • Moment fitting and uses of the Components of forces: Practical: Practical: • Stress following types: • Parallelogram of forces – Apply the identified welding resultant of two forces Calculations to determine: Practical: • Parallel symbols by welding different graphically only • Moment Calculations to determine types of joints using arc- • Taper Practical: • stress welding • Gib head Calculations to determine: • Woodruff keys • Forces RESOURCES TO Bolt, nuts, etc. as mentioned above. Testing equipment to demonstrate different types of forces. Calculators Arc-welding equipment. as mentioned above. Instructional ENHANCE Instructional videos, YouTube videos, etc. videos, YouTube videos, etc. LEARNING SBA (FORMAL) PAT Phase 2 and Control Test The Occupational Health and Safety Act, Act 85 of 1993, as amended, read with the Hazardous Biological Agents Regulations. Section 8 (1) of the Occupational Health and Safety (OHS) Act, Act 85 of 1993. Safe work practices are types of administrative controls that include procedures for safe and proper work used to reduce the duration, frequency, or intensity of exposure to a hazard. Examples of safe work practices for SANS. Requiring regular hand washing or using of alcohol-based hand rubs. Learners and teachers should always wash hands when they are visibly soiled and after removing any PPE. Keep safe distances and always wear a mask. See the document on the workshop safety measures. Downloaded from hlayiso.com 2

2023-24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING AND METALWORK): GRADE 10 2023-24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING AND METALWORK): GRADE 10 (TERM 3) TERM 3 WEEK 1 WEEK 2 WEEK 3 WEEK 4-5 WEEK 6-7 WEEK 8 WEEK 9 WEEK 10 WEEK 11 CAPS TOPICS MAINTENANCE (GENERIC) TERMINOLOGY DEVELOPMENTS (SPECIFIC) PAT CONSOLIDATION REVISION AND ASSESSMENT TOPICS, CONCEPTS, Define the following types of maintenance: Elbows with one joint only Right angled and oblique Unequal diameter pipes, Right cones with top and Developing, producing models Control test SKILLS AND VALUES T-pieces of equal diameters including shapes of holes. All base parallel to the from the drawings of right • Preventive branches to be on centre of horizontal plane angled and oblique T-pieces • Predictive the main pipe of equal and unequal diameters, and the right cones • Reliability centred maintenance with the top and base parallel Lack of maintenance on equipment to the horizontal • Excessive wear • Overheating, seizing, and distortion • Failure Practical: Practical: Analyse and predict the outcome of the lack of maintenance on equipment used in the workshop Demonstrate an understanding of developments by developing, producing models from the drawings of right angled and oblique T-pieces of equal and unequal diameters, and the right cones with the top and base parallel to the horizontal RESOURCES (OTHER THAN Instructional videos, YouTube videos, etc. Past question papers Instructional videos, YouTube videos, etc. Past question papers TEXTBOOK) TO ENHANCE LEARNING SBA (FORMAL) PAT Phase 3 and Control Test The Occupational Health and Safety Act, Act 85 of 1993, as amended, read with the Hazardous Biological Agents Regulations. Section 8 (1) of the Occupational Health and Safety (OHS) Act, Act 85 of 1993, Safe work practices are types of administrative controls that include procedures for safe and proper work used to reduce the duration, frequency, or intensity of exposure to a hazard. Examples of safe work practices for SANS. Requiring regular hand washing or using of alcohol-based hand rubs. Learners and teachers should always wash hands when they are visibly soiled and after removing any PPE. Keep safe distances and always wear a mask. See the document on the workshop safety measures Downloaded from hlayiso.com 3

2023-24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING AND METALWORK): GRADE 10 2023-24 ANNUAL TEACHING PLANS: MECHANICAL TECHNOLOGY (WELDING AND METALWORK): GRADE 10 (TERM 4) TERM 4 WEEK 1 WEEK 2 WEEK 3 WEEKS 4-5 WEEKS 6-10 CAPS TOPICS MATERIALS (GENERICS) PAT CONSOLIDATION REVISION AND ASSESSMENT TOPICS, CONCEPTS, CHARACTERISTICS, COMPOSITION AND USE OF: Collect a sample of 5 non-ferrous elements and 5 Examination SKILLS AND VALUES non-ferrous alloys Give 2 uses for each sample collected. Ferrous metals and alloys: Non-ferrous elements: Non-ferrous alloys: • Low carbon steel • Copper • Brass • Medium carbon steel • Tin • Bronze • High carbon steel • Lead • Phosphor bronze • Zinc • White metal, duralumin and solder Cast iron: • Aluminium Grey cast iron, White cast iron • Nickel • Stainless steel (manganese, chrome, vanadium, titanium, tungsten, molybdenum and cobalt) Practical: Collect a sample of 5 non-ferrous elements and 5 non-ferrous alloys Give 2 uses for each sample collected. RESOURCES Examples of the different types of materials as used in the welding and metalwork environment. (OTHER THAN Instructional videos, TEXTBOOK) TO ENHANCE YouTube videos, etc. LEARNING SBA (FORMAL) PAT Phase 4 and Final Examination The Occupational Health and Safety Act, Act 85 of 1993, as amended, read with the Hazardous Biological Agents Regulations. Section 8 (1) of the Occupational Health and Safety (OHS) Act, Act 85 of 1993, Safe work practices are types of administrative controls that include procedures for safe and proper work used to reduce the duration, frequency, or intensity of exposure to a hazard. Examples of safe work practices for SANS. Requiring regular hand washing or using of alcohol-based hand rubs. Learners and teachers should always wash hands when they are visibly soiled and after removing any PPE. Keep safe distances and always wear a mask. See the document on the workshop safety measures. Downloaded from hlayiso.com 4