Downloaded from hlayiso.com
SENIOR CERTIFICATE EXAMINATIONS/
NATIONAL SENIOR CERTIFICATE EXAMINATIONS
AGRICULTURAL TECHNOLOGY
2021
MARKS: 200
TIME: 3 hours
This question paper consists of 14 pages.
Copyright reserved Please turn over
Skip to contentAll 2021 papers 





View all





Agricultural Technology Grade 12 NSC June 2021 QP (Eng)
Grade 12 Agricultural Technology question paper from the NSC June Exam 2021 (English), 14 pages. Read online or download the free PDF.
Agricultural Technology · Grade 12 · NSC June Exam · 2021. Question paper, 14 pages. Read online or download the PDF.
- Subject
- Agricultural Technology
- Grade
- Grade 12
- Document type
- Question paper
- Year
- 2021
- Exam period
- NSC June Exam
- Curriculum
- CAPS
- Pages
- 14
- File size
- 571.3 KB
Free to read online, no sign-up needed
Loading document…
Loading document…
1 of 14
This exam
NSC June Exam 2021
Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com
Agricultural Technology 2 DBE/2021
SC/NSC
INSTRUCTIONS AND INFORMATION
1. GENERAL INSTRUCTIONS AND INFORMATION
1.1 This question paper consists of TWO sections, namely SECTION A
and SECTION B.
1.2 BOTH sections are COMPULSORY.
1.3 Answer ALL the questions in the ANSWER BOOK.
1.4 Number the answers correctly according to the numbering system
used in this question paper.
1.5 You may use a non-programmable calculator.
1.6 Write neatly and legibly.
2. SECTION A: SHORT QUESTIONS
2.1 This section consists of THREE questions.
2.2 Follow the instructions when answering the questions.
3. SECTION B: STRUCTURED LONG QUESTIONS
3.1 This section consists of FIVE questions.
3.2 Start EACH question on a NEW page.
Copyright reserved Please turn over
Downloaded from hlayiso.com
Agricultural Technology 3 DBE/2021
SC/NSC
SECTION A
QUESTION 1
1.1 Various options are provided as possible answers to the following questions.
Choose the answer and write only the letter (A–D) next to the question
numbers (1.1.1 to 1.1.10) in the ANSWER BOOK, e.g. 1.1.11 D.
1.1.1 … cameras are installed on drones to do surveillance work at night.
A Seismic
B Radar
C Infrared
D Doppler (2)
1.1.2 A … is used to load large round bales safely onto a truck.
A pulley
B trestle hoist
C loading ramp
D front-end fork loader (2)
1.1.3 A device installed in a solar charger system that prevents the
battery from overcharging:
A Multimeter
B Transformer
C Regulator
D Inverter (2)
1.1.4 … is NOT associated with the running expenses of a tractor.
A Depreciation
B Fuel
C Labour
D Supervising (2)
1.1.5 … is a term associated with agriculture, where all farm equipment
and spares must comply with certain common requirements.
A Precision farming
B Standardisation
C Mechanisation
D Production (2)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Agricultural Technology 4 DBE/2021
SC/NSC
1.1.6 A material that can be used effectively as a seal around the door of
a cold storage room:
A Vesconite
B Fibre glass
C Teflon
D Rubber (2)
1.1.7 The … determines the volume of the gas flow when welding with
an oxyacetylene set.
A cutting lever
B size of the nozzle
C size of the cylinders
D flashback arrester (2)
1.1.8 The teeth of this type of gear run at an angle across the outer
circumference of the gear:
A Ratchet gear
B Spur gear
C Ring gear
D Helical gear (2)
1.1.9 The … can be used effectively in a chain drive system.
A V-belt
B sprocket
C fishbone gear
D worm gear (2)
1.1.10 … is NOT a function of GPS navigation systems in modern
combine harvesters.
A Yield monitoring
B Autonomous steering
C Identifying a mechanical problem
D Determining of position (2)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Agricultural Technology 5 DBE/2021
SC/NSC
1.2 Change the UNDERLINED word(s) in each of the following statements
to make them TRUE. Write only the word next to the question numbers
(1.2.1 to 1.2.5) in the ANSWER BOOK, e.g. 1.2.6 Tractor.
1.2.1 Hearing loss is associated with long work shifts, excessive
workload and harassment. (2)
1.2.2 Shift the clutch to neutral after stopping a tractor when hitching an
implement. (2)
1.2.3 Chromium as an alloy element in stainless steel decreases
weldability. (2)
1.2.4 The catalyst and accelerator used in glass fibre repairs should
always be stored separately to avoid poisoning. (2)
1.2.5 The hammers of a hammer mill must be replaced regularly to
prevent vibration. (2)
1.3 Choose a word/term from COLUMN B that matches the description
in COLUMN A. Write only the letter (A–H) next to the question numbers
(1.3.1 to 1.3.5) in the ANSWER BOOK, e.g. 1.3.6 J.
COLUMN A COLUMN B
1.3.1 A major factor to consider A compressed air
when welding in the overhead
oxyacetylene position B thermal images
1.3.2 Removes the melted metal C latex
when doing plasma cutting
D tensiometer
1.3.3 Synthetic material used for the
manufacturing of hygienic E GPS
gloves
F gravity
1.3.4 Equipment that is used to
determine the moisture G centre pivot
content of soil
H research
1.3.5 Technology that is used to
determine areas of stunted
growth in a maize field
(5 x 2) (10)
TOTAL SECTION A: 40
Copyright reserved Please turn over
Downloaded from hlayiso.com
Agricultural Technology 6 DBE/2021
SC/NSC
SECTION B
QUESTION 2: MATERIALS AND STRUCTURES
Start this question on a NEW page.
2.1 Stainless steel, mild steel, copper and aluminium are all metals that are used
on a farm in different applications.
2.1.1 Which ONE of the metals above can be used to manufacture water
pipes for farmhouses? (1)
2.1.2 Give a reason why the metal named in QUESTION 2.1.1 will be the
most suitable for this application. (1)
2.1.3 Which joining method must be used to join two copper pipes
permanently? (1)
2.1.4 Name the metal that will be best for transporting milk in a dairy. (1)
2.1.5 Give a reason why the metal named in QUESTION 2.1.4 would be
most suitable for this specific application. (1)
2.1.6 Which joining method will be suitable for permanently joining
stainless steel? (1)
2.1.7 Name a metal that will be the most economical for the
manufacturing of a farm gate. (1)
2.1.8 Name a substance that can easily corrode copper. (1)
2.1.9 Name the metal that is commonly used in the food industry for
storing purposes. (1)
2.2 PVC pipes that are joined with PVC weld can sometimes leak. Recommend
THREE preparation procedures that must be followed before the adhesive is
applied to ensure an effective joint. (3)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Agricultural Technology 7 DBE/2021
SC/NSC
2.3 The picture below shows an electric fence.
2.3.1 Describe the earth leakage system of the electrical fence. (6)
2.3.2 Name the type of wire that should NOT be used in the construction
of an electric fence. (1)
2.3.3 State TWO daily activities that the farmer must perform to maintain
an electric fence properly. (2)
2.4 Explain why you would recommend Vesconite as the best material to use in
the manufacturing of bushes. (5)
2.5 Name ONE electrical property of Teflon and give a reason for your answer. (2)
2.6 Name FIVE properties applicable to the safety screens used on a combine
harvester. (5)
2.7 Give TWO reasons for using brass instead of copper in the manufacturing of
electrical connections. (2)
[35]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Agricultural Technology 8 DBE/2021
SC/NSC
QUESTION 3: ENERGY
Start this question on a NEW page.
3.1 Name TWO alternative energy sources that use a turbine and a generator
to generate electricity. (2)
3.2 The picture below shows a 3 000-watt photovoltaic solar panel system.
3.2.1 How many of these systems do you need to provide sufficient
power to a 6 kW submersible pump? (1)
3.2.2 Determine whether the panels should be connected in parallel or
series. Give a reason for your answer. (2)
3.2.3 Give a reason for the use of silicon in the manufacturing of the
solar cells. (1)
3.2.4 Name the layer of the solar panel that carries negative electrons. (1)
3.2.5 What can be done to ensure that electricity is also available during
the night if you use a solar power electric system? (1)
3.2.6 Name THREE applications of electric solar panels on a game farm. (3)
3.3 State FOUR advantages of a geothermal power station. (4)
3.4 Name FOUR factors that must be considered when choosing a suitable
location for installing a wind turbine on a farm. (4)
3.5 Name the process that is used to manufacture ethanol. (1)
[20]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Agricultural Technology 9 DBE/2021
SC/NSC
QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES
Start this question on a NEW page.
4.1 The table below shows four welding defects. Redraw the table in your
ANSWER BOOK and write down the answers to QUESTIONS 4.1.1 to 4.1.8.
ILLUSTRATION NAME OF THE GIVE THE POSSIBLE
WELDING CAUSES
DEFECT
4.1.1 4.1.2
4.1.3 4.1.4
4.1.5 4.1.6
4.1.7 4.1.8
(8)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Agricultural Technology 10 DBE/2021
SC/NSC
4.2 The illustration below shows the MIG welding process. Label A–D.
B
A C
D
(4)
4.3 The image below shows an oxyacetylene cutting apparatus.
4.3.1 Name TWO types of materials that can be cut with the above
apparatus. (2)
4.3.2 Explain FIVE steps to follow when making a straight cut on a
10 mm thick mild steel sheet using the oxyacetylene cutting
apparatus. (5)
4.3.3 Give THREE tips to ensure a high quality welding joint when oxy-
acetylene welding is done in the overhead welding position. (3)
4.4 Scenario
You are requested to design a work bench. The dimensions of the work
bench must be 1 200 mm x 600 mm x 900 mm (height).
Material needed:
o Angle iron of 50 mm x 50 mm x 5 mm
o Mild steel sheet of 2 500 mm x 1 200 mm x 5 mm
Use scale 1 : 100
Use the information above and draw a neat design sketch of the work bench.
Marks will be allocated as follows:
Design 2
Scale (Application) 1
Dimensions 2
Neatness 1 (6)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Agricultural Technology 11 DBE/2021
SC/NSC
4.5 Name a gas that could be used during plasma cutting to remove the melted
metal. (1)
4.6 Use a table and compare the inverter welding machine with the MIG welding
machine. (6)
[35]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Agricultural Technology 12 DBE/2021
SC/NSC
QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT
Start this question on a NEW page.
5.1 The sketch below shows three components working together in a system.
5.1.1 Identify the component in the sketch that serves as a connection
between the parts. (1)
5.1.2 Name the substance that is used to lubricate the component
identified in QUESTION 5.1.1. (1)
5.1.3 State ONE application of the component identified in
QUESTION 5.1.1. (1)
5.1.4 Name TWO mechanisms installed in the drive system of a
four-wheel drive vehicle that allows disconnection of drive to the
front wheels and state ONE advantage of EACH mechanism. (4)
5.2 Indicate the type of hydraulic cylinder that can be used to activate the fork of a
bale-handling mechanism when forced movement in reverse directions is
required. (1)
5.3 Give the function of the lining on the clutch plate as found in the clutch
assembly of a vehicle. (1)
5.4 Name TWO advantages of the differential lock as found on a tractor. (2)
5.5 Some universal joint bearings are manufactured without a grease nipple.
Name ONE advantage of such a bearing. (1)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Agricultural Technology 13 DBE/2021
SC/NSC
5.6 An electrical motor is connected to a centrifugal pump by means of pulleys
and a V-belt. The pump pulley has a diameter of 450 mm and the electrical
motor has a pulley of 150 mm.
5.6.1 Calculate the pulley ratio of the electrical motor to the pump. (Show
ALL calculations.) (3)
5.6.2 Give FOUR reasons why a farmer would prefer V-belt drive
systems to flat belt drive systems. (4)
5.6.3 Identify the part installed in the housing of the electrical motor to
allow the rotor shaft to rotate freely. (1)
5.7 Blue smoke seen at the exhaust pipe of a tractor indicates oil in the
combustion chamber. Give FOUR possible causes of the presence of oil in
the combustion chamber of an engine. (4)
5.8 Describe the properties of a functional clutch. (5)
5.9 Name FOUR parts that must be examined on a second-hand tractor before
you decide to buy it. (4)
5.10 State the functions of the following parts of a hammer mill:
5.10.1 Hopper (1)
5.10.2 Cyclone (1)
5.11 Give a reason for setting the wheels of a front-end loader to its widest
possible position. (1)
5.12 Describe the servicing procedures that must be followed when preparing a
combine harvester for the harvesting season. (4)
[40]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Agricultural Technology 14 DBE/2021
SC/NSC
QUESTION 6: WATER MANAGEMENT
Start this question on a NEW page.
6.1 Name FOUR important factors that must be considered before deciding on
a relevant irrigation method. (4)
6.2 What are the main goals with irrigation scheduling? (3)
6.3 Identify TWO structural problems on the sprinkler shown below that can
negatively influence efficiency.
(2)
6.4 Name a device that a farmer can use to measure the evaporation tempo in
a maize field. (1)
6.5 Draw a labelled freehand sketch of a French water drainage system. Marks
will be allocated as follows:
Design 1
Drawing 1
Labels 4 (6)
6.6 List FIVE items that should never be disposed of in a household septic tank
system. (5)
6.7 Give THREE reasons why it is essential for a farmer to know how to
determine the flow rate in a water pipe delivery system. (3)
6.8 The picture below shows a centre-pivot irrigation system.
6.8.1 Name THREE advantages of centre-pivot irrigation systems. (3)
6.8.2 Which THREE elements are built into the design of a centre-pivot
irrigation system to ensure uniform distribution of water along the
whole length of the system? (3)
[30]
TOTAL SECTION B: 160
GRAND TOTAL: 200
Copyright reserved
Study this subject
Recommended for this subject

Question paper
Agricultural Technology Grade 12 NSC June 2021 QP (Afr)

Memorandum
Agricultural Technology Grade 12 NSC June 2021 Memo (Afr)

Memorandum
Agricultural Technology Grade 12 NSC June 2021 Memo (Eng)

Question paper
Agricultural Technology Grade 12 NSC November 2021 QP (Afr)

Question paper
Agricultural Technology Grade 12 NSC June 2024 QP (Eng)

Question paper
Agricultural Technology Grade 12 NSC June 2023 QP (Eng)
More from Grade 12 Agricultural Technology

Annual teaching plan
Gr 12 Agric Tech ATP 2023 24

Memorandum
Agricultural Technology Grade 12 NSC June 2025 Memo (Afr)

Memorandum
Agricultural Technology Grade 12 NSC November 2025 Memo

Memorandum
Agricultural Technology Grade 12 NSC November 2025 Memo

Memorandum
Agricultural Technology Grade 12 November 2024 NSC Memo

Memorandum