Skip to content

Agricultural Technology Grade 12 NSC June 2021 Memo (Eng)

MemorandumAgricultural TechnologyGrade 12202113 pages

Grade 12 Agricultural Technology memorandum from the NSC June Exam 2021 (English), 13 pages. Read online or download the free PDF.

Free to read online, no sign-up needed

Loading document…

Loading document…

Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com SENIOR CERTIFICATE EXAMINATIONS/ NATIONAL SENIOR CERTIFICATE EXAMINATIONS AGRICULTURAL TECHNOLOGY 2021 MARKING GUIDELINES MARKS: 200 This marking guideline consists of 13 pages. Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 2 DBE/2021 SC/NSC – Marking Guidelines SECTION A QUESTION 1 1.1 1.1.1 C (2) 1.1.2 D (2) 1.1.3 C (2) 1.1.4 A (2) 1.1.5 B (2) 1.1.6 D (2) 1.1.7 B (2) 1.1.8 D (2) 1.1.9 B (2) 1.1.10 C (2) [20] 1.2 1.2.1 Stress/Depression/anxiety (2) 1.2.2 Gearbox/Gears/Transmission (2) 1.2.3 Magnetism/decrease rusting (2) 1.2.4 Explosion/Fire (2) 1.2.5 Simultaneously/together/All at once (2) [10] 1.3 1.3.1 F (2) 1.3.2 A (2) 1.3.3 C (2) 1.3.4 D (2) 1.3.5 B (2) (5 x 2) [10] TOTAL SECTION A: 40 Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 3 DBE/2021 SC/NSC – Marking Guidelines SECTION B QUESTION 2: MATERIALS AND STRUCTURES 2.1 2.1.1 A metal that will be used to supply warm water. Copper. (1) 2.1.2 The reason why Copper will be the best suited for warm water pipes. No corrosion/rust. (1) 2.1.3 The joining method that will be used to permanently join two Copper pipes. Soldering. (1) 2.1.4 The material that will be best to transport milk in a dairy system. Stainless steel. (1) 2.1.5 A reason why stainless steel will be the best metal. The steel is resistant to air, water and many chemicals used for cleaning/Corrosion resistant/Hygienic/does not contaminate food. (1) 2.1.6 A method used to permanently join stainless steel. Welding/TIG welding. (1) 2.1.7 The best metal used for the manufacturing of a farm gate. Mild steel. (1) 2.1.8 The substance that can corrode copper. Acids/Ammonium/Heavy metal salts/Sulphur. (1) 2.1.9 A metal that is commonly used in the food industry for food storing purposes. Aluminum. (1) 2.2 THREE preparation procedures to ensure a sufficient PVC pipe welding joint.  Make sure the joint is clean.  Make sure the joint is dry.  Sand both the joint with sandpaper. (3) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 4 DBE/2021 SC/NSC – Marking Guidelines 2.3 2.3.1 Description of the earth leakage system of the electrical fence.  There must be an earth spike to the ground to complete the circuit between the ground and the fence.  The animal or person will complete the circuit and get shocked.  Plant material will influence the circuit and must be removed.  Inspect the fence, isolators and connections frequently to prevent short circuit.  Run an earth return line parallel to the fence line on long distance fences.  Connect with earth spikes on a regular basis to improve the efficiency. (6) 2.3.2 The type of wire that may never be used to erect an electric fence.  Razor wire.  Barbed wire. (Any 1) (1) 2.3.3 TWO daily activities that the farmer must perform to properly maintain an electric fence.  Clean plants that is touching the fence.  Look for damaged or broken wires, isolators or loose connections and repair. (2) 2.4 Recommendations for the use of Vesconite when manufacturing bushes.  Easy to install or to remove.  Does not corrode and is non-conductive.  Will not wear shafts.  Resistant to a wide range of chemicals.  Cheap to manufacture. (5) 2.5 ONE electrical property of Teflon and a reason for the answer.  It has a high di-electric capacity.  Reason: Electricity don’t have an influence on this material. (2) 2.6 FIVE properties of safety screens on a combine harvester.  Light.  Safeguard the user.  Not vibrate or become loose.  Sturdy/Strong.  Keep out all undesired material. (5) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 5 DBE/2021 SC/NSC – Marking Guidelines 2.7 TWO reasons for the use of brass instead of copper in the manufacturing of electrical connections.  Hardness.  Strength.  Machinability.  Wear resistance.  Ductility. (Any 2) (2) [35] QUESTION 3: ENERGY 3.1 TWO alternative energy sources that make use of a turbine and a generator to generate electricity.  Wind.  Geothermal.  Hydro. (Any 2) (2) 3.2 3.2.1 The number of systems that you will need to provide sufficient power to a 6 kw submersible pump. Two. (1) 3.2.2 Determine whether the panels should be connected in parallel or series and a reason for the answer. Series. Because a connection in series will increase the kw/power twice. (2) 3.2.3 ONE Reason for the use of silicon in the manufacturing of the solar cells.  Is a semi conductive material.  Can withstand the temperature of the sun.  Don't conduct heat.  Is water tight/proof. (Any 1) (1) 3.2.4 The layer of the solar panel that carries negative electrons. The top layer/N-Type layer. (1) 3.2.5 Measure to ensure that there is electricity available during the night. Use a battery system for the night. (1) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 6 DBE/2021 SC/NSC – Marking Guidelines 3.2.6 THREE applications of solar panels on a game farm.  To provide power to: security cameras.  Alarm systems.  Electric gate motors.  Emergency lights.  Electric fencing.  Borehole pumps. (Any 3) (3) 3.3 FOUR advantages of geothermal power station.  No pollution.  The cost of the land to build a geothermal power plant on is usually less expensive.  Clean energy.  Tax cuts.  No fuel is used to generate electricity.  Low running cost. (Any 4) (4) 3.4 FOUR factors that must be considered when installing a small wind turbine on a farm.  Must be in an open space/field.  Flat area.  The absence of obstacles like trees/forests/hills/mountains.  The presence of strong and frequent winds.  A location further from a village or residential site.  Location away from suburbs.   Not harmful to bird life or nature.  (Any 4) (4) 3.5 Process used to manufacture ethanol. Distillation. (1) [20] Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 7 DBE/2021 SC/NSC – Marking Guidelines QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES 4.1 Welding defect Gee moontlike oorsake 4.1.1 4.1.2 Porosity.  Blocked nozzle.  Gas flow too low or too high.  Leaking gas lines.  Draught conditions.  Nozzles distance from the work is too great.  Painted, wet or oily plate.  Wet or rusty electrode/wire. (Any 1) 4.1.3 4.1.4 Spatter.  Voltage too low.  Inadequate inductance  Rusty or dirty plate. (Any 1) 4.1.5 4.1.6 Undercut.  Welding speed too fast.  Current too high.  Poor technique. (Any 1) 4.1.7 4.1.8 Lack of  Amps too low. fusion.  Irregular surface.  Wrong torch angle. (Any 1) (8) 4.2 MIG welding labels for the numbers A–D as indicated. A – Molten puddle. B – Contact tip. C – Welding wire/Electrode. D – Shielding gas. (4) 4.3 4.3.1 TWO materials that can be cut with oxy-acetylene cutting apparatus.  Mild steel.  Cast iron.  Stainless steel. (Any 2) (2) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 8 DBE/2021 SC/NSC – Marking Guidelines 4.3.2 FIVE steps that must be followed to cut a straight line on a 10mm mild steel sheet using an Oxy-acetylene cutting apparatus.  Attach an guide iron to the metal sheet next to the place where you want to cut/parrallel to your mark.  Select the appropriate nozzle size.  Light the torch and adjust the required flame.  Bring the material up to red-hot.  Oxygen is then fed with the lever on the cutting attachment.  Move the torch at the required speed along a guide.  The oxygen will blow the melted iron from the cutting area to create a clean cutting line. (Any 5) (5) 4.3.3 THREE oxy-acetylene welding tips in the overhead welding position.  Reduced melting pool just big enough to create the wanted penetration.  Reducing the size of the flame.  Use a slightly thicker welding rod.  Use the force of the flame to keep the molten metal in position. (Any 3) (3) 4.4 Marks will be allocated for the following: Design 2 Correct scale 1 Dimensions 2 Neatness 1 1200  Neatness  Design  600  900 Scale = 1:100  (6) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 9 DBE/2021 SC/NSC – Marking Guidelines 4.5 A gas that can be used with a plasma cutter to remove the melted metal.  Argon.  Nitrogen.  Oxygen.  Compressed air. (Any 1) (1) 4.6 Comparison in table form of the Inverter welding machine to the MIG welding machine Inverter welder MIG welding machine  Low initial setup cost.  High initial setup cost.  Compact.  Bulk or large.  Light and easy to handle.  Heavy and difficult to handle.  Slag must be removed after  No slag. welding.  No additional shielding gas  Need additional cylinder for the cylinder needed. shielding gas.  Lower maintenance cost.  High maintenance cost. (Any 6) (6) [35] QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT 5.1 5.1.1 Identification of the component in the sketch that serves as a connection between the parts. Universal joint. (1) 5.1.2 The substance that is used to lubricate the universal joint. Grease. (1) 5.1.3 ONE application of the universal joint.  Drive shaft.  Power take off shaft.  Steering mechanism. (Any 1) (1) 5.1.4 TWO mechanisms installed in the drive system of a four-wheel drive vehicle that allows disconnection of drive to the front wheels and ONE advantage of each device.  4 x 4 Gearbox. 4 x 4 can be disengaged when driving on tar roads.  Front wheel hub locking devices. Wear is reduced on the front wheels and front wheel system. (4) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 10 DBE/2021 SC/NSC – Marking Guidelines 5.2 Type of hydraulic cylinder used to lift or lower the fork of the baling machine. Double action hydraulic cylinder. (1) 5.3 Function of the lining on the friction plate of a clutch.  Prevents the pressure plate from slipping.  Heat resistant/Wear resistant. (Any 1) (1) 5.4 TWO advantages of the diff lock as found on a 4x4 tractor.  Provide increased traction/torque.  Both wheels turn together regardless of traction available to each.  Each wheel applies rotational force independent of the available traction. (Any 2) (2) 5.5 ONE advantage of a bearing without a grease nipple.  Comes lubricated from manufacturer.  No additional greasing needed.  Sealed bearing. (Any 1) (1) 5.6 5.6.1 Calculation of the pulley ratio of the electrical motor to the pump. Driven pulley Drive pulley 450mm 150mm = 3 Ratio: 3:1 (3) 5.6.2 FOUR reasons for using a V-belt instead of a flat belt.  V-belts do not slip off pulleys.  V-belts draw tighter around a pulley when tension increases.  Lubrication is never necessary.  V-belts are relatively strong, and under normal circumstances do not easily break.  V-belts last longer than flat belts.  Cold, moist conditions, age or use do not cause V-belts to stretch or shrink. (Any 4) (4) 5.6.3 Part that allows relative rotation to the rotor shaft. Bearing. (1) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 11 DBE/2021 SC/NSC – Marking Guidelines 5.7 FOUR possible faults in the engine that can cause the presence of oil in the combustion chamber.  Piston rings are worn.  Cylinder gasket blown.  Crack in cylinder head.  Cylinder sleeves/walls are worn.  Valve stem seals perished/worn. (Any 4) (4) 5.8 Properties of a functional clutch.  It should engage smoothly and not jam, slip or shudder.  It should be capable of transferring the maximum load of the engine without slip.  When the clutch is disengaged, it should do so completely and not tend to drag.  The clutch should be of such a nature that it could be engaged or disengaged comfortably by hand or foot.  The friction material used on the clutch plate should not only be highly wear and temperature resistant. (5) 5.9 FOUR parts that must be examined on a second hand tractor before you decide to buy it.  Engine.  Gearbox.  Final drive.  Cooling system.  Fuel system.  Steering mechanism.  Instruments.  Battery. (Any 4) (4) 5.10 Function of the parts of a hammer mill. 5.10.1 The hopper: Facilitates the process of feeding. (1) 5.10.2 Cyclone: Separates the grounded material from the air. (1) 5.11 Reason for the wheels of a front-end loader to be set at its widest position. To increase stability. (1) 5.12 Servicing procedure when preparing a combine harvester for the harvesting season.  Lubricate/Grease all moving parts.  Correct tension of belts and chains.  Check that all parts are functioning by operating it slowly.  Replace all worn parts.  Service according to manufacturer's specifications.  Lift up all dust release guards.  Check that no blades are damaged and are sharp. (Any 4) (4) [40] Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 12 DBE/2021 SC/NSC – Marking Guidelines QUESTION 6: WATER MANAGEMENT 6.1 FOUR factors to be considered before deciding on a relevant irrigation method.  Type of crop that must be irrigated.  Determine the amount of water that is available.  Type of irrigation system.  Type of pump.  Determine the water flow (LPM) and pressure requirements.  Size of the field.  Create the first irrigation design. (Any 4) (4) 6.2 Goals of irrigation scheduling.  To apply adequate water to the root zone of the plant.  Prevent overwatering.  Allow the soil to dry out in between watering.  To allow air to enter the soil. (Any 3) (3) 6.3 TWO structural problems that can influence the sprinkler.  The springs can lose tension or break.  The nozzles can be blocked.  The water pressure is inadequate. (Any 2) (2) 6.4 A device that a farmer can use to measure the evaporation tempo in a maize field. Evaporation pan/Class A evaporation pan. (1) 6.5 Labelled drawing of a French water drainage system. Marks will be allocated for: Design 1 Drawing 1 Labels 4 Trench /Furrow Gravel/Stone Perforated pipe/Pipe Permeable membrane (6) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 13 DBE/2021 SC/NSC – Marking Guidelines 6.6 FIVE items that should never be disposed off in a septic tank.  Cigarette butts.  Sanitary pads/towels.   Detergents.  Fats and oils.  Laundry waste.  Plastics.  (Any 5) (5) 6.7 THREE reasons to determine the flow rate in a pipe delivery system.  For correct calibrating of the sprayers.  For effective scheduling of irrigation.  To prevent the over utilisation of the water source. (3) 6.8 6.8.1 THREE advantages of a centre pivot irrigation system.  No labourer needed to shift the pipes/system.  One-man operation.  Automated watering system/scheduling.  Pesticides/fertilizers are applied through the system. (Any 3) (3) 6.8.2 THREE design principles that are built into the centre pivot irrigation system to ensure uniform distribution of water.  Distribution pattern of the sprayers.  Nozzle opening diameter must increase proportionally further from the centre to allow for a higher water application.  Spacing between sprayers must decrease proportionally further from the centre. (3) [30] TOTAL SECTION B: 160 GRAND TOTAL: 200 Copyright reserved

Study this subject

More from Grade 12 Agricultural Technology

View all