Skip to content

Agricultural Technology Grade 12 NSC June 2022 Memo (Eng)

MemorandumAgricultural TechnologyGrade 12202215 pages

Grade 12 Agricultural Technology memorandum from the NSC June Exam 2022 (English), 15 pages. Read online or download the free PDF.

Free to read online, no sign-up needed

Loading document…

Loading document…

Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com SENIOR CERTIFICATE EXAMINATIONS/ NATIONAL SENIOR CERTIFICATE EXAMINATIONS AGRICULTURAL TECHNOLOGY 2022 MARKING GUIDELINES MARKS: 200 These marking guidelines consist of 15 pages. Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 2 DBE/2022 SC/NSC – Marking Guidelines SECTION A QUESTION 1 1.1 1.1.1 A 1.1.2 C 1.1.3 D 1.1.4 B 1.1.5 A 1.1.6 C 1.1.7 B 1.1.8 D 1.1.9 C 1.1.10 A (20) 1.2 1.2.1 Red  1.2.2 Hard facing  1.2.3 Noise pollution  1.2.4 GPS  1.2.5 Rectangular bales  (10) 1.3 1.3.1 E 1.3.2 G 1.3.3 C 1.3.4 F 1.3.5 D (10) TOTAL SECTION A: 40 Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 3 DBE/2022 SC/NSC – Marking Guidelines SECTION B QUESTION 2: MATERIALS AND STRUCTURES 2.1 THREE possible factors that when choosing a suitable adhesive for this specific application.  Inflammability.  Duration of cohesion.  Duration of usability.  Heat resistance. (temperature)  Water resistance/ Oil resistance.  Elasticity.  Load capacity. (Any 3) (3) 2.2 Advantages of using a water trough made from glass fibre over a trough made of steel.  Lightness.  Can be formed into any shape.  Can easily be sawn, drilled, and filed.  Toughness.  Easy repaired when broken.  Does not rust, corrode or erode.  (Any 3) (3) 2.3 FOUR chemical substances that does not have any effect on Teflon.  Adhesives./ Glue.  Asphalt/tar.  Dyes./ Poisons  Greases.  Gasses.   Latex.  Lacquers/ Fuels.  Paint. (4)  Acids.  (Any 4) 2.4 2.4.1 ONE reason for using Vesconite in dry applications and explanation for each answer. Reason: Vesconite do not need any lubricant.  Explanation: Made of internal lubricated polymers.  (2) 2.4.2 TWO circumstances where Vesconite can be effectively used on a tractor to replace existing metal bushes.  Front-axle swivel bushes.  Steering linkage bushes.  Gear lever bushes.   Three point lift bushes.  (2) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 4 DBE/2022 SC/NSC – Marking Guidelines 2.5 2.5.1 THREE factors that must be taken into consideration when identifying tin for the manufacturing of food cans.  Soft.  Malleable metal.  Can be highly polished.  Resists oxygen and water but dissolves in acids and bases (prevent rust). (Any 3) (3) 2.5.2 TWO commercial uses of tin other than the application in the food canning industry.  Metal coating.  Alloy element of bronze.  Alloy element of soft soldering.  Cool drink cans.  (Any 2) (2) 2.6 TWO properties of bronze bushes that makes it better suited for the use on implements.  Bronze resists corrosion.  Resists metal fatigue more than steel.  Better conductor of heat.  Low friction properties. (Any 2) (2) 2.7 THREE influences of manganese on stainless steel.  It combats corrosion.  Gives steel a coarser structure.  Changes the band structure, causing a reduction in striking strength.  Increases tensile strength.  Reduces the critical cooling tempo.  Improves hardening.  Increases resistance against wear.  Reduces magnetism. (Any 3) (3) 2.8 Justification of the use of brass over copper in the manufacturing of water couplings.  Strength.  Machinability.  Wear resistance.  Hardness. (Any 2) (2) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 5 DBE/2022 SC/NSC – Marking Guidelines 2.9 2.9.1 Identify component A and B in the diagram. A - Energiser. B - Earth spike. (2) 2.9.2 The maximum voltage allowed by legislation that can be applied in the system. 10 000 volt. (1) 2.9.3 Description of the daily tasks that must be carried out to maintain an electric fence.  Clear any vegetation from the fence line.  Check for damaged or broken wires.  Damaged isolators or loose connections.  Regular testing of the energiser's pulse. (Any 2) (2) 2.9.4 FOUR soil conditions that can have a negative effect on the earth efficiency of an electrical fence.  Peat.  Sandy soil.  Gravel.  Very dry soil.  Snow or frozen ground. (Any 4) (4) [35] Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 6 DBE/2022 SC/NSC – Marking Guidelines QUESTION 3: ENERGY 3.1 3.1.1 THREE important factors that must be considered when installing a wind turbine.  Select suitable environment.  Size of the turbine.  Availability of substantial wind strength.  Absence of mountains and hills.  Turbine capacity.  Hire a professional to do a survey on the surrounding area. (Any 3) (3) 3.1.2 Explanation of TWO benefits of wind turbines.  Decades of free electricity after initial-cost recovery.  Increased property values.  Reliable electricity generation.  Relief from high prices of other forms of electricity.  Personal energy independence.  Supports clean energy.  Fight global warming.  Renewable energy.   No fuel costs.  (Any 2 ) (2) 3.2 3.2.1 The semi-conductive material used for the manufacturing of the photovoltaic solar panel. Silicon. (1) 3.2.2 Explanation of the process of generating electrical energy in a solar panel.  The solar panels are made of a semi-conductive material that contains electrons.  When photons (contained within the sun's rays) hit the solar cells, the electrons absorb this solar energy.  Transforming them into conduction electrons.  Electrons are able to become free, and carry an electric charge through a circuit to a destination. (4) 3.3 The advantages of a geothermal power station above a coal power station.  A geothermal system does not create any pollution.  The cost of the land to build a geothermal power plant on is usually less expensive.  Geothermal plants take up very little room.  You may receive tax cuts, and/or no environmental bills.  No fuel is used to generate the power.  No costs for purchasing, transporting, or cleaning up of fuels. (Any 4) (4) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 7 DBE/2022 SC/NSC – Marking Guidelines 3.4 FOUR benefits of biofuels.  Biofuel offers a cheaper solution to our energy needs.  Bio-fuels are made from plant and animal waste.  Biodegradable.  Do not harm the environment.  Does not require any radical changes to switch to the use of biofuels.  Renewable sources of energy.  Inexpensive to produce.  Help prevent engine knocking. (Any 4) (4) 3.5 TWO resources for the manufacturing of methanol.  Woody plant fibre.  Coal.  Natural gas.  Fermented waste products such as sewage and manure. (Any 2) (2) [20] Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 8 DBE/2022 SC/NSC – Marking Guidelines QUESTION 4: SKILLS AND CONSTRUCTION PROCESSES 4.1 4.1.1 Identification of part A. Cutting Nozzle. (1) 4.1.2 Identifying the problem indicated by arrow B that can occur when thick materials are being cut with the plasma-cutting machine. The angle of cut will not be square/90º. (1) 4.1.3 Addressing the problem identified in QUESTION 4.1.2.  A machine can be used to grind the face square.  The welding nozzle can be tilted at an angle to compensate for the problem. (Any 1) (1) 4.1.4 TWO types of gasses that are commonly used in the plasma- cutting process.  Regular air  Argon  Nitrogen  Oxygen (Any 2) (2) 4.2 4.2.1 TWO gasses used during the oxy-acetylene cutting process. Acetylene and oxygen.  (2) 4.2.2 Advantages of the oxy-acetylene apparatus over the plasma cutter.  No need for electricity.  Can be used to heat up work pieces.   Portable.  No electrical components.  Rust has no influence on the cutting process.  Easy to operate.  (Any 3) (3) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 9 DBE/2022 SC/NSC – Marking Guidelines 4.2.3 Important safety measures to note when working with the oxy-acetylene cutting apparatus.  If a cylinder falls over and breaks the main valve off, the cylinder will become a missile and cause extreme damage.  Wear a leather apron or similar protective clothing and welding gloves when using an oxy-acetylene cutting torch.  Always use proper oxy-acetylene cutting goggles.  Never point the flame towards another person or any flammable material.  Always light the oxyacetylene cutting torch with a striker.  Wherever possible, use a heat shield behind the component you are heating.  After heating a piece of metal, label it as 'HOT' with a piece of chalk so that others will not attempt to pick it up.  Make sure there are no leaks on pipes and connections.   Make sure all valves are closed after use.  (3) (Any 3) 4.3 4.3.1 Describing the process to replace a worn welding tip.  Remove the welding shield cup.  Unscrew the damaged welding tip.  Screw the new tip on.  Replace the welding cup. (4) 4.3.2 Explanation of the use of anti-spatter spray during the MIG welding process.  Prevent the sprout from clogging with welding metal.  Prevent the filler wire/welding electrode from sticking to the contact tip. (2) 4.3.3 FOUR reasons for the welding wire not running smoothly through the welding hose.  Bended welding feeder hose.  Damage to the feeding mechanism.  Corroded welding electrode/wire.  Damaged tip. (4) 4.4 Preventative measures: 4.4.1 Spot weld. 4.4.2 Pre-setting. 4.4.3 Clamping. (3) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 10 DBE/2022 SC/NSC – Marking Guidelines 4.5 Design drawing of a door for a horse stable. Marks will be allocated for the following: Design (1) Hinges and latch (2) Dimensions (2) Neatness (1) (6) 4.6 Explanation of using an inverter welder powered by a generator rather than using a MIG welder.  Lightweight.  Compact.  No need for gas cylinder.  Inverter can work in windy conditions. (Any 3) (3) [35] Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 11 DBE/2022 SC/NSC – Marking Guidelines QUESTION 5: TOOLS, IMPLEMENTS AND EQUIPMENT 5.1 5.1.1 FIVE basic implements that can be used in the harvesting of the crop.  Tractor.  Cutting machine.  Hay rake.  Baling machine.  Wrapping machine.  Front-end loader. (Any 5) (5) 5.1.2 THREE advantages of using machinery in the harvesting process.  Single operation.  Less time consuming.  Labour saving.  Very reliable method.  Economical. (3) 5.1.3 Another method that can be used to cut lucerne. Using a sickle. (1) 5.1.4 ONE safety device that is installed on a baling machine  Shear bolt.  Slip clutch.  Tension springs. (Any 1) (1) 5.2 5.2.1 Calculation of the running cost of a combine harvester. (Show ALL calculations.) R8 100-00 + R1 200-00 + R1 500-00 + R3 000-00 + R8 000-00 = R21 800-00 (2) 5.2.2 Calculating the VAT (15%) of the total running cost. R21 800-00 x 15% = R3 270-00 (2) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 12 DBE/2022 SC/NSC – Marking Guidelines 5.3 5.3.1 Label for the graph. Depreciation. (1) 5.3.2 Determine the right time to sell the tractor by analysing the data from the graph and TWO reasons for the answer.  During year 4. Motivation  One year left on maintenance plan.  Higher value than selling during year 6. (3) 5.3.3 THREE actions a farmer can take to minimize excessive depreciation in the value of second-hand implements.  Repair/Replace broken or worn parts.  Store properly.  Service according to user manual.  Use implement according to specifications. (Any 3) (3) 5.4 5.4.1 Identification of the components labelled A, B and C and TWO functions of each. A. Top link.  To adjust the angle of the implement in relation to the tractors movement.  Serves as top connection of the three-point mechanism to the implement. B. Hydraulic pump.  Provides pressure to the hydraulic system of the tractor.  Provides pressure to the hydraulic system of the implement. C. PTO drive shaft.  Transmits driving power from tractor to the implement.  Provide angular movement between the tractor and implement. (9) 5.4.2 THREE important safety precautions applicable to component C.  Never climb over the driving shaft when in motion.   Safety screen must be in place.  Safety screen must not rotate with the shaft.  Screen must by highly visible.  Never work on an implement when driving shaft is in motion. (Any 3) (3) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 13 DBE/2022 SC/NSC – Marking Guidelines 5.5 5.5.1 Identification of the components labelled A, B and C. A Flywheel. B Clutch plate. C Pressure plate. (3) 5.5.2 FOUR reasons for equipping a tractor with a clutch.  Engine drive needs to be disengaged when gears are changed.  Drive should be disengaged when the tractor is started.  The clutch is disengaged to allow engine speed to increase and then engaged to give greater torque.  Allows the operator to stop the tractor, belt pulley or PTO shaft without stopping the engine. (4) [40] Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 14 DBE/2022 SC/NSC – Marking Guidelines QUESTION 6: WATER MANAGEMENT 6.1 6.1.1 Explanation of the structure's ability to carry the heavy load of the irrigation system.  Sustained by triangulation/truss method.  Arched design.  Steel cables/rods hold the trusses. (Any 2) (2) 6.1.2 ONE possible cause of sprinkler nozzle blockage and provide a solution to the problem.  Sand/fertilizer particles.  Plant matter.  Organisms in water. (Algae, tadpoles etc.)  This can be prevented by installing a filter in the system. (Any 2) (2) 6.1.3 THREE factors to consider when selecting a water pump for the centre pivot system.  Water source.  Type of pump.  Size.  Pressure requirements.  Available pump models.  Power source needed to run the pump. (Any 3) (3) 6.2 The process when an irrigation farmer sets the correct frequency and duration of water application to a crop to maximise plant growth. Irrigation scheduling/timing. (1) 6.3 6.3.1 Identify component A and its function.  Manhole/Drain cover.  It is to provide access for cleaning and inspection. (2) 6.3.2 Requirements that must be followed to keep septic system functional.  Use only toilet paper.  Do not flush down non-degradable materials into the tank. (Cigarettes, plastics, rubber)  No disinfectants, bleaches, oils should be flushed down the system.  Inspect manhole regularly.  Empty the tank when required. (Any 4) (4) Copyright reserved Please turn over
Downloaded from hlayiso.com Agricultural Technology 15 DBE/2022 SC/NSC – Marking Guidelines 6.4 6.4.1 Explanation of the technical lay out of the drainage system.  It contains perforated pipes.  The pipes are buried under gravel or pebbles.  The water drains through the surface gravel and seeps into the pipe's perforations before flowing out at the end of the pipe.  Pipes are installed at a slight angle or slope to facilitate the flow of water away from the waterlogged area. (Any 3) (3) 6.4.2 A system that can quickly move large amounts of water from water logged fields.  Channel drain.  Slope drain.  Herringbone. (Any 1) (1) 6.4.3 A few aspects that can cause problems if there is no drainage system installed around the perimeter of a building.  Water leaks into the house.  Moisture rises into the walls.  Standing water attracts pests.  Erosion around the foundation. (Any 3) (3) 6.5 6.5.1 Identification of timer A. (1) Mechanical timer. 6.5.2 TWO disadvantages of timer B.  Difficult to set up/operate.  Battery needs to be replaced regularly.  Electronic parts need to be properly sealed. (Any 2) (2) 6.5.3 The timer that has a multiple programming function. Timer B. (1) 6.6 THREE advantages of using the faucet water filtration system.  Does not require the boiling of water.  Quick process of purifying water.  Filters are easy accessible on the kitchen top.  Can be switched on and off.  Cartridges are fairly inexpensive and easy to change. (Any 3) (3) 6.7 A monitoring system for each scenario in the table below. Scenario Monitoring system Precisely control the rate of 6.7.1 Variable-rate Technology. application of fertilizer. Determine areas of under growth. 6.7.2 Geographic Information System/Drone/Thermal imaging.Yield (2) monitor. [30] TOTAL SECTION B: 160 GRAND TOTAL: 200 Copyright reserved

Study this subject

More from Grade 12 Agricultural Technology

View all