NATIONAL
SENIOR CERTIFICATE
GRADE 12
SEPTEMBER 2025
MECHANICAL TECHNOLOGY:
FITTING AND MACHINING
MARKING GUIDELINE
MARKS: 200
This marking guideline consists of 21 pages.
Skip to contentAll 2025 papers 

%20GR12%20MEMO%20SEPT2023_English_hlayiso.com_--dfc975c1-e179-4741-8d4f-e3b20c744c7e/v1-c61c66086bf36fcf31e0/card.webp)



View all
%20Eng--5d2e2bd0-b02f-4218-849f-e7933bc6c4d1/v1-2dba8a1dc6758c98b205/card.webp)
%20Afr--1e7205e4-aef1-4cc4-afdf-aac93562ae67/v1-094abcfa5c3eff1cb995/card.webp)
%20Eng--10859467-be3e-41fb-aee0-b797c385437d/v1-986e8982bfb6b966a34d/card.webp)

%20Afr_hlayiso.com_--7d638feb-7218-4b3c-9f4c-ce95803d6e4f/v1-e8a08d94a30d7d50ccd0/card.webp)
Mechanical Technology Grade 12 Eastern Cape Mock 2025 Memo
Grade 12 Mechanical Technology memorandum from the Eastern Cape Mock Exam 2025 (English), 21 pages. Read online or download the free PDF.
Mechanical Technology · Grade 12 · Eastern Cape Mock Exam · 2025. Memorandum, 21 pages. Read online or download the PDF.
- Subject
- Mechanical Technology
- Grade
- Grade 12
- Document type
- Memorandum
- Year
- 2025
- Exam period
- Eastern Cape Mock Exam
- Curriculum
- CAPS
- Pages
- 21
- File size
- 1.4 MB
Free to read online, no sign-up needed
Loading document…
Loading document…
1 of 21
This exam
Eastern Cape Mock Exam 2025
- Other filesQuestion paperMemo
Document textSearch extracted text and jump to a page.
2 MECHANICAL TECHNOLOGY (FITTING AND MACHINING) (EC/SEPTEMBER 2025)
SECTION A: COMPULSORY
QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC)
1.1 A (1)
1.2 C (1)
1.3 C (1)
1.4 B (1)
1.5 A (1)
1.6 D (1)
(6 X 1) (6)
QUESTION 2: SAFETY (GENERIC)
2.1 Safety precautions
• See that all guards are in place.
• Make sure that no oil, grease, or obstacles are around the machine.
• Select the right blade for the material to be cut.
• Do not adjust guides while the machine is running.
• All materials must be clamped properly before cutting is started.
• Long pieces of material must be supported at the end.
• Always stop machine when you leave it unattended. (Any 2 x 1) (2)
2.2 Responsibilities of the employees
• Pay attention to their own and other people’s health and safety.
• Co-operate with the employer regarding the OHS Act.
• Carry out a lawful order given to them.
• Report any situation that is unsafe or unhealthy.
• Report all incidents and accidents.
• Not to interfere with any safety equipment or misuse such equipment
• Obey all safety rules. (Any 2 x 1) (2)
2.3 Bench grinder
• Use safety goggles at all times when grinding metal.
• Do not adjust the tool rest while the wheel is in motion.
• Do not force the workpiece onto or bump it against the emery wheel.
• Keep fingers away from revolving wheel, especially when grinding small
pieces.
• Grind only on the front surface and never on the sides of an emery
wheel. (Any 2 x 1) (2)
Copyright reserved Please turn over
(EC/SEPTEMBER 2025) MECHANICAL TECHNOLOGY (FITTING AND MACHINING) 3
2.4 Advantages of product layout
• Handling of material is limited to a minimum.
• Time period of manufacturing cycle is less.
• Production control is almost automatic.
• Control over operations is easier.
• Greater use of unskilled labor is possible.
• Less total inspection is required.
• Less total floor space is needed per unit of production.
(Any 2 x 1) (2)
2.5 Categories of OHS
• Actions
• Conditions (2)
[10]
Copyright reserved Please turn over
4 MECHANICAL TECHNOLOGY (FITTING AND MACHINING) (EC/SEPTEMBER 2025)
QUESTION 3: MATERIALS (GENERIC)
3.1 Testing materials
• Sound test
• Bending test
• Filling test
• Machining test
• Hardness test
• Spark test (Any 3 x 1) (3)
3.2 Carbon groups
• Low carbon steel 0,15–0,3%
• Medium carbon steel 0,3–0,75%
• High carbon steel 0,75–1,7% (6)
3.3 Purpose of normalizing
• To relieve the internal stresses produced by machining, forging or
welding. (2)
3.4 Tempering process for steel
• Heat the steel to a temperature below the critical temperature.
• Soak it at that temperature for a period.
• Quench / cool in an appropriate quenching agent. (water, brine, or oil) (3)
[14]
Copyright reserved Please turn over
(EC/SEPTEMBER 2025) MECHANICAL TECHNOLOGY (FITTING AND MACHINING) 5
QUESTION 4: MULTIPLE-CHOICE QUESTION (SPECIFIC)
4.1 C
4.2 C
4.3 A
4.4 A
4.5 B
4.6 D
4.7 A
4.8 B
4.9 B
4.10 A
4.11 D
4.12 C
4.13 D
4.14 B [14]
Copyright reserved Please turn over
6 MECHANICAL TECHNOLOGY (FITTING AND MACHINING) (EC/SEPTEMBER 2025)
QUESTION 5: TERMINOLOGY (LATHE AND MILLING MACHINE) (SPECIFIC)
5.1 Tailstock set over
𝜃 𝑋
Tan 2 = 320
X = Tan 3,5° x 320
= 19,57 mm (3)
5.2 Keyway
5.2.1 Parallel key OR Pratt and Whitney key OR feather key (1)
5.2.2 Length = 1,5 x D
126
Diameter = 1,5
= 84 mm (2)
5.2.3 Thickness =6
𝐷
84
= 6
= 14 mm (2)
5.2.4 Width = 4
𝐷
84
= 4
= 21 mm (2)
5.3 Milling processes
Up-cut milling advantages
• Heavier cuts can be taken
• Hard steels can be cut.
• Life of a milling cutter is extended.
• A coarse feed can be used.
• Strain on the cutter and arbor will be less.
• Heavier cuts can be taken (Any 1 x 1) (1)
Copyright reserved Please turn over
(EC/SEPTEMBER 2025) MECHANICAL TECHNOLOGY (FITTING AND MACHINING) 7
Down-cut milling advantages
• Deeper cuts can be taken
• A finer finish is obtained
• Less vibration is experienced (Any 1 x 1) (2)
5.4 Difference between gang milling and straddle milling.
Correct drawing 2 marks each
Labels 1 mark each (6)
[18]
Copyright reserved Please turn over
8 MECHANICAL TECHNOLOGY (FITTING AND MACHINING) (EC/SEPTEMBER 2025)
QUESTION 6: TERMINOLOGY (INDEXING) (SPECIFIC)
6.1 Gear terminology
6.1.1 Dedendum
(2)
6.1.2 Pitch circle diameter.
PCD = circular pitch (CP) x number of teeth(T)
π
= (m x π) x T
π
= 7,85 x 25
π
= 62,5 mm
OR
(2)
6.1.3 Outside diameter
(2)
6.1.4 Circular pitch
(2)
Copyright reserved Please turn over
(EC/SEPTEMBER 2025) MECHANICAL TECHNOLOGY (FITTING AND MACHINING) 9
6.2 Spur gear cutting
6.2.1 Simple indexing
40
Indexing = 𝐴
40
= 100
2 5
=5×5
10
= 25
Indexing is 10 holes in 25-hole circle
OR
Indexing is 12 holes in 30-hole circle (4)
6.2.2 Change gears
𝐷𝑟𝑖𝑣𝑒𝑟 𝐴−𝑁 40
= × 1
𝐷𝑟𝑖𝑣𝑒𝑛 𝐴
100−97 40
= × 1
100
120
=
100
6 8
=5×8
48
= 40
Driver has 48 teeth
Driven has 40 teeth (5)
Copyright reserved Please turn over
10 MECHANICAL TECHNOLOGY (FITTING AND MACHINING) (EC/SEPTEMBER 2025)
6.3 Dovetail calculations
Calculate distance “x” between rollers:
X = 120−2(DE)+2(AC)+2 (r)
Y = 120 − 2 (DE)
Calculating DE
Calculating AC
Calculating Y
Y = 120 − 2 (DE)
= 120 − 2 (18,48)
= 83,04 mm
Calculating X
X = 120 − 2(DE) + 2(AC) + 2 (r)
= 120 − 2(18,48) + 2(21,65) + 2 (12,5)
= 83,04 + 43,3 + 25
= 151,34 mm (11)
[28]
Copyright reserved Please turn over
(EC/SEPTEMBER 2025) MECHANICAL TECHNOLOGY (FITTING AND MACHINING) 11
QUESTION 7: TOOLS AND EQUIPMENT (SPECIFIC)
7.1 Difference between hardness and toughness
Hardness
Material’s ability to resist deformation, abrasion, indentation, penetration or
scratching and wear
Toughness
Material’s ability to withstand shock loads without bending or cracking (4)
7.2 Hardness testing
7.2.1 Brinell hardness testing (1)
7.2.2 Label parts
A – Applied force
B – Indenter or indenter diameter
C – Indentation diameter (3)
7.3 Screw thread micrometer reading
Drawing 2 marks
Correct reading 3 marks
6 mm ✓ 0,5 mm ✓ 0,3 mm ✓ (5)
[13]
Copyright reserved Please turn over
12 MECHANICAL TECHNOLOGY (FITTING AND MACHINING) (EC/SEPTEMBER 2025)
QUESTION 8: FORCES (SPECIFIC)
8.1 System of forces
8.1.1 Sum of horizontal components
∑HC = –30 cos 30 – 40 cos 45 – 60 cos 80 +70 cos 40
= – 25,98 – 28,28 – 10,42 + 53,62
= – 11,06 N (5)
8.1.2 Sum of vertical components
∑VC = – 30 sin 30 + 40 sin 45 – 60 sin 80 – 70 sin 40
= – 15 + 28,28 – 59,09 – 45
= – 90,81 N (5)
OR
Force 𝜽 Vertical components Horizontal components
30 210 30 sin 210 - 15 30 cos 210 -25,98
40 135 40 sin 135 28,28 40 cos 135 -28,28
60 260 60 sin 260 -59,09 60 cos 260 -10,42
70 320 70 sin 320 -45 70 cos 320 53,62
TOTAL Y -90,81 N X -11,06N
8.1.3 Magnitude of the resultant
R2 = X2 + Y2
= (11,06)2 + (90,81)2
= √8368,7797
R = 91,48 N (2)
8.1.4 Angle and the direction of the resultant
𝑌
Tan 𝜽 = 𝑋
𝟗𝟎,𝟖𝟏
= 𝟏𝟏.𝟎𝟔
= tan-1 (8,21066….)
𝜽 = 83,10° S of W OR 263,10° (2)
Copyright reserved Please turn over
(EC/SEPTEMBER 2025) MECHANICAL TECHNOLOGY (FITTING AND MACHINING) 13
8.2 Stress and Strain
8.2.1 Diameter of the shaft
60 kN = 50 x 103
30 MPa = 30 x 106
𝐹
𝜎 = 𝐴
𝐹
𝐴 = 𝜎
✓
= 60 x 103 ✓
30 x 106
= 2 x 10-3 m2
A = 𝜋 r2
𝐴
r2 = 𝜋
2 × 10−3
𝑟 = √
𝜋
= 25 × 10-3
D = 50,46 × 10-3 m
= 50,46 mm
(5)
8.2.2 Strain
𝜎
K =
𝜀
𝜎
𝜀 = 𝐾
= 30 x 106
90 x 109
= 3,33 x 10-4 (3)
8.2.2 Change in length
∆𝑙
𝜀 = 𝐿
✓
∆𝐿 = 𝜀 × L
= 3,33 x 10-4 × 2
= 6,67 x 10-4 m
= 0,67 mm (3)
Copyright reserved Please turn over
14 MECHANICAL TECHNOLOGY (FITTING AND MACHINING) (EC/SEPTEMBER 2025)
8.3 Moments
FIGURE 8.3
8.3.1 Uniform Distributed Load
5 kN/m x 4 m
= 20 kN (2)
8.3.2 Taking moments about RL
∑CWM = ∑ACWM
(20 x 2) + (10 x 4) +(30 x 7) = (RR x 10)
40 + 40 + 210 = 10 RR
10 10
RR = 29 kN (3)
8.3.3 Taking moments about RR
∑CWM = ∑ACWM
(30 x 3) + (10 x 6) +(20 x 8) = (RL x 10)
90 + 60 + 160 = 10 RL
10 10
RL = 31 kN (3)
[33]
Copyright reserved Please turn over
(EC/SEPTEMBER 2025) MECHANICAL TECHNOLOGY (FITTING AND MACHINING) 15
QUESTION 9: MAINTENANCE
9.1 Preventative maintenance sub-groups
• Planned or scheduled maintenance
• Condition based maintenance (2)
9.2 Chain drive maintenance
• Cleaning uncovered chain drives
• Check sprocket teeth and link plate wear
• Lubricating chain drives (manually or automatically)
• Checking the functioning of tensioning devices (idler sprocket)
• Inspect chains regularly for elongation and record results (Any 3 x 1) (3)
9.3 Cutting fluid maintenance
• Check that there is sufficient flow of cutting fluid to the cutting tool ✓
• Ensure that the sump is topped up from time to time ✓
• Remove metal cutting from the machine's splash tray. ✓
• Avoid contamination of the cutting fluid by draining and regularly
replacing it. (Any 3 x 1) (3)
9.4 Viscosity
Viscosity is the resistance of a fluid to flow. (2)
9.5 Advantageous characteristics for using nylon
• Toughness
• Hard-wearing
• Needs little or no maintenance
• Needs no lubrication
• It is cheap
• It is light
• Can absorb shock
• Resistant to chemicals
• Endures high temperatures (Any 2 x 1) (2)
9.6 Uses of Materials
9.6.1 Teflon
• Orthopaedic and prosthetic appliances
• Hearing aids
• Joints
• Upholstery
• Corrosion resistant mechanical parts (taps and bearings)
• Electrical insulation
• Non-stick coatings for cooking utensils (Any 1 x 1) (1)
Copyright reserved Please turn over
16 MECHANICAL TECHNOLOGY (FITTING AND MACHINING) (EC/SEPTEMBER 2025)
9.6.2 Glass fibre
Motor vehicle bodies
Boats
Transparent roofing sheets
Petrol tanks
Swimming pools
Furniture
Fruit and salad bowls
Ornaments
Fishing rods (1)
9.7 True or False
9.7.1 True (1)
9.7.2 False (1)
9.7.3 False (1)
9.7.4 True (1)
[18]
Copyright reserved Please turn over
(EC/SEPTEMBER 2025) MECHANICAL TECHNOLOGY (FITTING AND MACHINING) 17
QUESTION 10: JOINING METHODS (SPECIFIC)
10.1 Pitch of screw thread
• The pitch is the axial distance measured from any given point on the
screw thread to a corresponding point on an adjacent thread. (2)
10.2 Square thread terminology
A – Crest/outside diameter
B – Effective/mean diameter or pitch diameter
C – Pitch
D – Helix angle
E – Cutting tool (5)
10.3 Square Thread Calculations:
10.3.1 Lead = Pitch × number of starts
=6x3
= 18 mm (2)
10.3.2 Mean diameter
1
= OD - 2 pitch
1
= 78 - 2 (6)
= 75 mm (2)
10.3.3 𝑙𝑒𝑎𝑑
Helix angle: tan 𝜃 = 𝑝𝑖𝑡𝑐ℎ 𝑐𝑖𝑟𝑐𝑢𝑚𝑓𝑒𝑟𝑒𝑛𝑐𝑒
18
tan 𝜃 = 𝜋 ×75
𝜃 = tan-1 (0,0763…)
𝜃 = 4,37° (3)
10.3.4 Leading tool angle = 90° – (helix + clearance angle)
= 90° – (4,37° + 3°)
= 82,63o (2)
10.3.5 Following tool angle = 90° + (helix - clearance angle)
= 90° + (4,37° - 3°)
= 91,37° (2)
[18]
Copyright reserved Please turn over
18 MECHANICAL TECHNOLOGY (FITTING AND MACHINING) (EC/SEPTEMBER 2025)
QUESTION 11: SYSTEMS AND CONTROL (DRIVE SYSTEMS) (SPECIFIC)
11.1 Function of a belt
• Transfer motion from pulley A to pulley B. (2)
11.2 Belt drives:
11.2.1 Diameter of the driven pulley
(3)
11.2.2 Power transmitted
(5)
NOTE: If driven diameter and speed is used to calculate power,
mark correct, i.e. 2 316,23 Watt.
Copyright reserved Please turn over
(EC/SEPTEMBER 2025) MECHANICAL TECHNOLOGY (FITTING AND MACHINING) 19
11.3 Speed ratio
𝐷𝑟𝑖𝑣𝑒𝑛
Speed ratio = 𝐷𝑟𝑖𝑣𝑒𝑟
60
= 15
=4:1 (3)
11.4 Hydraulics:
11.4.1 Fluid pressure
(5)
Copyright reserved Please turn over
20 MECHANICAL TECHNOLOGY (FITTING AND MACHINING) (EC/SEPTEMBER 2025)
11.4.2 Force F on piston A
(5)
11.4.3 Distance X
Copyright reserved Please turn over
(EC/SEPTEMBER 2025) MECHANICAL TECHNOLOGY (FITTING AND MACHINING) 21
(5)
[28]
TOTAL: 200
Copyright reserved Please turn over
Study this subject
Recommended for this subject

Memorandum
Mechanical Technology Grade 12 Eastern Cape Mock 2023 Memo

Memorandum
Mechanical Technology Grade 12 Eastern Cape Mock 2023 Memo
%20GR12%20MEMO%20SEPT2023_English_hlayiso.com_--dfc975c1-e179-4741-8d4f-e3b20c744c7e/v1-c61c66086bf36fcf31e0/card.webp)
Memorandum
Mechanical Technology Grade 12 Eastern Cape Mock 2023 Memo

Memorandum
Mechanical Technology Grade 12 Eastern Cape Mock 2023 Memo

Memorandum
Mechanical Technology Grade 12 Eastern Cape Mock 2020 Memo

Memorandum
Mechanical Technology Grade 12 Eastern Cape Mock 2020 Memo
More from Grade 12 Mechanical Technology

Annual teaching plan
Gr 12 Weld Met ATP 2023 24
%20Eng--5d2e2bd0-b02f-4218-849f-e7933bc6c4d1/v1-2dba8a1dc6758c98b205/card.webp)
Question paper
Mechanical Technology Grade 12 November 2024 NSC QP (Eng)
%20Afr--1e7205e4-aef1-4cc4-afdf-aac93562ae67/v1-094abcfa5c3eff1cb995/card.webp)
Question paper
Mechanical Technology Grade 12 November 2024 NSC QP (Afr)
%20Eng--10859467-be3e-41fb-aee0-b797c385437d/v1-986e8982bfb6b966a34d/card.webp)
Question paper
Mechanical Technology Grade 12 NSC June 2024 QP (Eng)

Question paper
Mechanical Technology Grade 12 Eastern Cape Mock 2023 QP
%20Afr_hlayiso.com_--7d638feb-7218-4b3c-9f4c-ce95803d6e4f/v1-e8a08d94a30d7d50ccd0/card.webp)
Question paper