NATIONAL
SENIOR CERTIFICATE
GRADE 12
SEPTEMBER 2023
MECHANICAL TECHNOLOGY:
WELDING AND METALWORK
MARKING GUIDELINE
MARKS: 200
This marking guideline consists of 12 pages.
Skip to contentAll 2023 papers 



%20MEMO%20SEPT%202018_English_hlayiso.com_--b985e4dd-9a08-4ec2-a07b-64edd6f727ea/v1-e5704410f2b7cfd49bb6/card.webp)
%20GR12%20MEMO%20SEPT%202018_English_hlayiso.com_--1b0b4dd6-b53e-485d-9068-6f378eb8c9f3/v1-7320b22b5b5eecec97b6/card.webp)
View all
%20Eng--5d2e2bd0-b02f-4218-849f-e7933bc6c4d1/v1-2dba8a1dc6758c98b205/card.webp)
%20Afr--1e7205e4-aef1-4cc4-afdf-aac93562ae67/v1-094abcfa5c3eff1cb995/card.webp)
%20Eng--10859467-be3e-41fb-aee0-b797c385437d/v1-986e8982bfb6b966a34d/card.webp)
%20Afr_hlayiso.com_--7d638feb-7218-4b3c-9f4c-ce95803d6e4f/v1-e8a08d94a30d7d50ccd0/card.webp)
%20Eng_hlayiso.com_--1523a16f-2012-4f13-a922-86cbb5900666/v1-5068227f3cbbba17b78f/card.webp)
Mechanical Technology Grade 12 Eastern Cape Mock 2023 Memo
Grade 12 Mechanical Technology memorandum from the Eastern Cape Mock Exam 2023 (English), 12 pages. Read online or download the free PDF.
Mechanical Technology · Grade 12 · Eastern Cape Mock Exam · 2023 · English. Memorandum, 12 pages. Read online or download the PDF.
- Subject
- Mechanical Technology
- Grade
- Grade 12
- Language
- English
- Document type
- Memorandum
- Year
- 2023
- Exam period
- Eastern Cape Mock Exam
- Curriculum
- CAPS
- Pages
- 12
- File size
- 610.0 KB
Free to read online, no sign-up needed
Loading document…
Loading document…
1 of 12
This exam
Document textSearch extracted text and jump to a page.
2 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2023)
QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC)
1.1 C ✓ (1)
1.2 D ✓ (1)
1.3 C ✓ (1)
1.4 C ✓ (1)
1.5 A ✓ (1)
1.6 B ✓ (1)
[6]
QUESTION 2: SAFETY (GENERIC)
2.1 Arc welding safety precautions:
• Wear the correct PPE.
• Ensure the electrode holder is well insulated.
• The environment must be free of water and combustible materials.
• Ensure the environment is well ventilated. (Any 3 x 1) (3)
2.2 Pedestal drilling machine safety precautions:
• Wear correct PPE.
• Make sure all guards are in place.
• Clamp the workpiece securely.
• Use the correct drill bit.
• Do not make any adjustment while the machine is in motion.
• Use the correct speed.
• Do not remove chips by hand. (Any 2 x 1) (2)
2.3 Manual guillotine maximum cutting thickness is 1,20 mm (1)
2.4 2.4.1 Advantages of product layout:
• Handling of material is limited to a minimum.
• Time period of manufacturing cycle is less.
• Production control is almost automatic.
• Greater use of unskilled labour is possible.
• Less total inspection is required.
• Less total floor space is needed per unit of production.
(Any 2 x 1) (2)
2.4.2 Advantages of the process layout:
• High machine utilisation because more than one product is
manufactured.
• Better supervision as a result of subdivision of processes.
• Less interruption in flow of work when machines become
defective.
• Lower equipment cost, since one machine can produce more
than one product.
• Better control of total manufacturing cost.
• Greater flexibility in the production process. (Any 2 x 1) (2)
[10]
Copyright reserved Please turn over
(EC/SEPTEMBER 2023) MECHANICAL TECHNOLOGY (WELDING AND METALWORK) 3
QUESTION 3: MATERIALS (GENERIC)
3.1 Purpose of case hardening:
• To produce a hard case over and tough core. (2)
3.2 Using high carbon steel for case hardening
• The hardness will penetrate the core. ✓ (1)
3.3 Factors of hardness:
• Work piece size
• Quenching rate
• Carbon content (3)
3.4 Types of quenching mediums:
• Water and salt (brine)
• Tap water
• Liquid salts
• Molten lead
• Soluble oil and water
• Oil (Any 3 x 1) (3)
3.5 Colour coding of engineering materials:
• To identify the type of materials as well as the carbon content of steel ✓ (1)
3.6 Types of tests:
3.6.1 • Filing test ✓
• Machining test ✓ (Any 1 x 1) (1)
3.6.2 • Sound test ✓
• Spark test ✓ (Any 1 x 1) (1)
3.6.3 • Bending test ✓ (1)
3.7 Machine for spark test:
• Pedestal grinding machine ✓ (1)
[14]
Copyright reserved Please turn over
4 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2023)
VRAAG 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC)
4.1 D
4.2 D
4.3 C
4.4 A
4.5 A
4.6 D
4.7 A
4.8 B
4.9 A
4.10 A
4.11 D
4.12 B
4.13 A
4.14 D (14 x 1) [14]
Copyright reserved Please turn over
(EC/SEPTEMBER 2023) MECHANICAL TECHNOLOGY (WELDING AND METALWORK) 5
QUESTION 5: TERMINOLOGY (TEMPLATES) (SPECIFIC)
5.1 Other side up (1)
5.2 Sketch of roof truss:
✓ (6)
5.3. Calculations of steel ring:
5.3.1 Mean Ꝋ = Outside Ꝋ – plate thickness
OR
Inside Ꝋ + plate thickness
Mean Ꝋ = 520 – 42
= 478 mm
Mean Circumference = 𝜋 x mean Ꝋ
= 𝜋 x 478
= 1501,87 mm
Rounded of to 1 502 mm for one ring. (4)
5.3.2
Outside
Diameter
Plate thickness
Mean diameter
Inside diameter
(4)
5.4 A – Contour symbol
B – Finish symbol grinding
C – Length of weld
D – Pitch of weld
E – Weld all round
F – Arrow
G – Finish symbol machining
H – Tail (8)
[23]
Copyright reserved Please turn over
6 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2023)
QUESTION 6: TOOLS AND EQUIPMENT (SPECIFIC)
6.1 A – Current adjuster
B – Electrode terminal
C – Electrode holder
D – Electrode
E – Arc gap
F – Earth terminal
G – Earth clamp
H – Current scale (8)
6.2 Metal inert gas (1)
6.3 CO2 and Terrell (2)
6.4 The power saw is used to rough-cut large sections of metal before they are
further machined or used in manufacturing. It uses a reciprocating movement.
The band saw cut in a horizontal position continuously in a forward direction
due to the fact that the band is continuously moving in a circular path. (4)
6.5 Stock
Mixer
Nozzle (3)
[18]
QUESTION 7: FORCES (SPECIFIC)
7.1 7.1.1 Stress
𝐿𝑂𝐴𝐷
Stress = 𝐴𝑅𝐸𝐴
80 x 103
= 𝜋𝐷2
4
4 x 80 x 103
𝜋𝐷2 =
30 x 106
4 x 80 x 103
𝐷2 = 𝜋 x 30 x 106
D = 58,2 mm (5)
7.1.2 Strain
𝑆𝑇𝑅𝐸𝑆𝑆
Young’s Modulus = 𝑆𝑇𝑅𝐴𝐼𝑁
𝑆𝑡𝑟𝑒𝑠𝑠
Strain = 𝑌𝑜𝑢𝑛𝑔′𝑠 𝑚𝑜𝑑𝑢𝑙𝑢𝑠
30 x 106
= 90 x 109
Strain = 0,00033 (3)
Copyright reserved Please turn over
(EC/SEPTEMBER 2023) MECHANICAL TECHNOLOGY (WELDING AND METALWORK) 7
7.1.3 Change in length
Change in length
Strain =
Original length
Change = Strain x Original length
= 0,00033 x 4
= 0,00133 mm (3)
7.2 7.2.1 Reactions
Take reactions RL and RR
RR x 10 = (3 x 3) + (10 x 4) + (6 x 7)
= 9 + 40 + 42
= 91
RR = 9,1 N
RL x 10 = (6 x 3) + (10 x 6) + (3 x 7)
= 18 + 60 + 21
= 99
RL = 9,9 N (6)
7.2.2 B𝑀𝐴 : (9,9 x 3) = 29,7 N/m
B𝑀𝐵 : (9,9 x 5) – (3 x 2) = 43,5 N/m
B𝑀𝐶 : (9,9 x 7) – (3 x 4) – (10 x 3) = 27,3 N/m (5)
Copyright reserved Please turn over
8 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2023)
7.3 Framework:
Member Strut Tie Force
AE 15,3 N
BG 11,3 N
CH 12,2 N
FG 6,9 N
EF
DE 13,25 N
DF 13,25 N
DH 6,2 N
GH 7N
Guide (23)
[45]
Copyright reserved Please turn over
(EC/SEPTEMBER 2023) MECHANICAL TECHNOLOGY (WELDING AND METALWORK) 9
QUESTION 8: JOINING METHODS (INSPECTION OF WELDS)
8.1 • The liquid dye penetrant is sprayed onto the clean surface being
inspected.
• Allow a short time for the liquid to penetrate.
• Remove the excess dye with a cleaner (solvent).
• Wash the surface and allow to dry.
• When the surface is dry, spray it with a developer to bring out the colour,
which was sprayed on and penetrated any cracks or pin holes.
• Fluorescent liquids are also used for the surface being inspected.
• After a short while, remove the liquid with a cleaner and wait for it to dry.
• A black-light source (ultraviolet light) is then brought up to the surface.
• Areas where the fluorescent liquid has penetrated will show up under the
light. (Any 8 x 1) (8)
8.2 It refers to a cavity-type formed by gas during the solidification of molten
weld metal. (3)
8.3 • Shape of profile
• Uniformity of surface
• Overlap
• Undercutting
• Penetration bead
• Root groove (Any 3 x 1) (3)
8.4 • Slag inclusion
• Porosity
• Lack of fusion
• Oxidised or burnt metal (4 x 1) (4)
8.5 • Correct flame for the work at hand
• Correct angle of welding torch and welding rod
• Depth penetration and amount of fusion
• The rate of progress along the joint (Any 2 x 1) (2)
8.6 • Good for ferrous and non-ferrous metals
• Low cost
• Easy to apply
• Minimal training required (Any 3 x 1) (3)
[23]
Copyright reserved Please turn over
10 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2023)
QUESTION 9: JOINING METHODS (STRESSES AND DISTORTION) (SPECIFIC)
9.1 • Do not over weld.
• Control the fill up.
• Use intermittent welds.
• Use the smallest leg size for fillet welds.
• Use minimum root opening.
• Use minimum included angle.
• Select joints that use minimum weld metal. (Any 4 x 1) (4)
9.2 • Do not over weld.
• Proper preparation is needed.
• Use intermittent welding.
• Use as few passes as possible.
• Place welds near the neutral axis.
• Use back step welding.
• Anticipate shrinkage forces.
• Plan the welding sequence.
• Minimise welding time. (Any 5 x 1) (5)
9.3 Low carbon steel (0,15–0,30%) known as mild steel.
Medium carbon steel (0,31–0,70%) known as spring steel.
High carbon steel (0,71–1,5%) known as tool steel. (6)
9.4 It is common in gas metal arc welding and comprises of droplets of molten
material that are generated at or near the welding arc. (3)
[18]
QUESTION 10: MAINTENANCE (SPECIFIC)
10.1 To accommodate multiple technicians to do maintenance, using their own
locks. (2)
10.2 If excessive loads are applied onto the spindle bearings, the grinding
wheel and the grinding machine motor. (2)
10.3 • The journals and bearings/bushes must be well lubricated.
• Failure to lubricate the components will result in friction and wear of the
components. (2)
10.4 • To monitor the machine’s condition.
• To assist in upholding warrantees and guarantees that forms part of the
service agreements. (2)
[8]
Copyright reserved Please turn over
(EC/SEPTEMBER 2023) MECHANICAL TECHNOLOGY (WELDING AND METALWORK) 11
QUESTION 11: TERMINOLOGY (SPECIFIC)
11.1 11.1.1 Length CG = √602 + 1302 + 2602
= √88 100
= 296,82 mm (2)
11.1.2 Length BG = √602 + 1752 + 2602
= √101 825
= 319,10 mm (2)
11.1.3 Length AE = √602 + 1602 + 2602
= √96 800
= 311,13 mm (2)
11.1.4 Length GD = √1302 + 1402 + 2602
= √104 100
= 322,43 mm (2)
11.1.5 Length HC = √402 + 1302 + 2602
= √86 100
= 293,43 mm (2)
11.1.6 Length HK = √1302 + 2602
= √84 500
= 293,43 mm (2)
11.2 11.2.1 Length AB = 𝜋 x D ÷ 2
= 𝜋 x 800 ÷ 2
=1 256,8 mm (3)
Copyright reserved Please turn over
12 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2023)
11.2.2 Circumference of small circle:
Circumference = 𝜋 𝑥 D
= 𝜋 x 350
= 1 099,7 mm (3)
11.2.3 Length 0 – 2:
0–2=D÷2
= 350 ÷ 2
= 175 mm (3)
[21]
TOTAL: 200
Copyright reserved Please turn over
Study this subject
Recommended for this subject

Question paper
Mechanical Technology Grade 12 Eastern Cape Mock 2023 QP

Memorandum
Mechanical Technology Grade 12 Eastern Cape Mock 2020 Memo

Question paper
Mechanical Technology Grade 12 Eastern Cape Mock 2020 QP

Question paper
Mechanical Technology Grade 12 Eastern Cape Mock 2020 QP
%20MEMO%20SEPT%202018_English_hlayiso.com_--b985e4dd-9a08-4ec2-a07b-64edd6f727ea/v1-e5704410f2b7cfd49bb6/card.webp)
Memorandum
Mechanical Technology Grade 12 Automotive 2018 Memo (Eng)
%20GR12%20MEMO%20SEPT%202018_English_hlayiso.com_--1b0b4dd6-b53e-485d-9068-6f378eb8c9f3/v1-7320b22b5b5eecec97b6/card.webp)
Memorandum
Mechanical Technology Grade 12 2018 Memo (Eng)
More from Grade 12 Mechanical Technology

Annual teaching plan
Gr 12 Weld Met ATP 2023 24
%20Eng--5d2e2bd0-b02f-4218-849f-e7933bc6c4d1/v1-2dba8a1dc6758c98b205/card.webp)
Question paper
Mechanical Technology Grade 12 November 2024 NSC QP (Eng)
%20Afr--1e7205e4-aef1-4cc4-afdf-aac93562ae67/v1-094abcfa5c3eff1cb995/card.webp)
Question paper
Mechanical Technology Grade 12 November 2024 NSC QP (Afr)
%20Eng--10859467-be3e-41fb-aee0-b797c385437d/v1-986e8982bfb6b966a34d/card.webp)
Question paper
Mechanical Technology Grade 12 NSC June 2024 QP (Eng)
%20Afr_hlayiso.com_--7d638feb-7218-4b3c-9f4c-ce95803d6e4f/v1-e8a08d94a30d7d50ccd0/card.webp)
Question paper
Mechanical Technology Grade 12 NSC June 2023 QP (Afr)
%20Eng_hlayiso.com_--1523a16f-2012-4f13-a922-86cbb5900666/v1-5068227f3cbbba17b78f/card.webp)
Question paper