NATIONAL
SENIOR CERTIFICATE
GRADE 12
SEPTEMBER 2023
MECHANICAL TECHNOLOGY: AUTOMOTIVE
MARKING GUIDELINE
MARKS: 200
This marking guideline consists of 12 pages.
Skip to contentAll 2023 papers 



%20MEMO%20SEPT%202018_English_hlayiso.com_--b985e4dd-9a08-4ec2-a07b-64edd6f727ea/v1-e5704410f2b7cfd49bb6/card.webp)
%20GR12%20MEMO%20SEPT%202018_English_hlayiso.com_--1b0b4dd6-b53e-485d-9068-6f378eb8c9f3/v1-7320b22b5b5eecec97b6/card.webp)
View all
%20Eng--5d2e2bd0-b02f-4218-849f-e7933bc6c4d1/v1-2dba8a1dc6758c98b205/card.webp)
%20Afr--1e7205e4-aef1-4cc4-afdf-aac93562ae67/v1-094abcfa5c3eff1cb995/card.webp)
%20Eng--10859467-be3e-41fb-aee0-b797c385437d/v1-986e8982bfb6b966a34d/card.webp)
%20Afr_hlayiso.com_--7d638feb-7218-4b3c-9f4c-ce95803d6e4f/v1-e8a08d94a30d7d50ccd0/card.webp)
%20Eng_hlayiso.com_--1523a16f-2012-4f13-a922-86cbb5900666/v1-5068227f3cbbba17b78f/card.webp)
Mechanical Technology Grade 12 Eastern Cape Mock 2023 Memo
Grade 12 Mechanical Technology memorandum from the Eastern Cape Mock Exam 2023 (English), 12 pages. Read online or download the free PDF.
Mechanical Technology · Grade 12 · Eastern Cape Mock Exam · 2023 · English. Memorandum, 12 pages. Read online or download the PDF.
- Subject
- Mechanical Technology
- Grade
- Grade 12
- Language
- English
- Document type
- Memorandum
- Year
- 2023
- Exam period
- Eastern Cape Mock Exam
- Curriculum
- CAPS
- Pages
- 12
- File size
- 322.2 KB
Free to read online, no sign-up needed
Loading document…
Loading document…
1 of 12
This exam
Document textSearch extracted text and jump to a page.
2 MECHANICAL TECHNOLOGY (AUTOMOTIVE) (EC/SEPTEMBER 2023)
QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC)
1.1 C✓ (1)
1.2 D✓ (1)
1.3 C✓ (1)
1.4 C✓ (1)
1.5 A✓ (1)
1.6 B✓ (1)
(6 x 1) [6]
QUESTION 2: SAFETY (GENERIC)
2.1 Arc welding safety precautions:
• Wear the correct PPE
• Ensure the electrode holder is well insulated
• The environment must be free of water and combustible materials
• Ensure the environment is well ventilated (Any 3 x 1) (3)
2.2 Pedestal drilling machine safety precautions:
• Wear correct PPE
• Make sure all guards are in place
• Clamp the workpiece securely
• Use the correct drill bit
• Do not make any adjustment while the machine is in motion
• Use the correct speed
• Do not remove chips by hand (Any 2 x 1) (2)
2.3 Manual guillotine maximum cutting thickness is 1,20 mm (1)
2.4 2.4.1 Advantages of product layout:
• Handling of material is limited to a minimum.
• Time period of manufacturing cycle is less.
• Production control is almost automatic.
• Greater use of unskilled labour is possible.
• Less total inspection is required.
• Less total floor space is needed per unit of production. (Any 2 x 1) (2)
2.4.2 Advantages of the process layout:
• High machine utilisation because more than one product is
manufactured.
• Better supervision as a result of subdivision of processes.
• Less interruption in flow of work when machines become defective.
• Lower equipment cost, since one machine can produce more than
one product.
• Better control of total manufacturing cost.
• Greater flexibility in the production process. (Any 2 x 1) (2)
[10]
Copyright reserved Please turn over
(EC/SEPTEMBER 2023) MECHANICAL TECHNOLOGY (AUTOMOTIVE) 3
QUESTION 3: MATERIALS (GENERIC)
3.1 Purpose of case hardening:
• To produce a hard case over and a tough core. (2)
3.2 Using high carbon steel for case hardening:
• The hardness will penetrate the core ✓ (1)
3.3 Factors of hardness:
• Work piece size
• Quenching rate
• Carbon content (3)
3.4 Types of quenching mediums:
• Water and salt (brine)
• Tap water
• Liquid salts
• Molten lead
• Soluble oil and water
• Oil (Any 3 x 1) (3)
3.5 Colour coding of engineering materials:
• To identify the type of materials as well as the carbon content of steel ✓ (1)
3.6 Types of tests:
3.6.1 • Filing test ✓
• Machining test ✓ (Any 1 x 1) (1)
3.6.2 • Sound test ✓
• Spark test ✓ (Any 1 x 1) (1)
3.6.3 • Bending test ✓ (1)
3.7 Machine for spark test:
• Pedestal grinding machine ✓ (1)
[14]
Copyright reserved Please turn over
4 MECHANICAL TECHNOLOGY (AUTOMOTIVE) (EC/SEPTEMBER 2023)
QUESTION 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC)
4.1 D✓ (1)
4.2 C✓ (1)
4.3 A✓ (1)
4.4 B✓ (1)
4.5 B✓ (1)
4.6 C✓ (1)
4.7 C✓ (1)
4.8 A✓ (1)
4.9 D✓ (1)
4.10 C✓ (1)
4.11 B✓ (1)
4.12 A✓ (1)
4.13 C✓ (1)
4.14 D✓ (1)
[14]
Copyright reserved Please turn over
(EC/SEPTEMBER 2023) MECHANICAL TECHNOLOGY (AUTOMOTIVE) 5
QUESTION 5: TOOLS AND EQUIPMENT (SPECIFIC)
5.1 Safety precautions of an emission gas analyser:
• The inlet hose must not be restricted in any way. ✓
• The hose connection must be airtight. ✓
• The valve on the condenser must be in the horizontal position (closed). ✓
• The vehicle must not have any exhaust leakage. ✓
• Condensate must be blown out of hose regularly with compressed air. ✓
• The hoses must be disconnected from the analyser, otherwise the pump will
be damaged. ✓
• The condenser must be drained after each test. ✓
• When the paper filter becomes light grey, it should be changed. ✓
• The fuel filter on the condenser stand must be changed regularly. ✓
(Any 2 x 1) (2)
5.2 Purpose of a diagnostic scanner:
Scans all systems on the vehicle ✓ and make adjustment on different sensors. ✓ (2)
5.3 Set-up procedure of a diagnostic scanner:
• Plug the scan tool into the OBD-II connector under the dashboard. ✓
• Turn the key on, but do not start the engine. ✓
• Follow the instructions shown on the screen and enter the necessary
information. ✓ (3)
5.4 Wheel alignment equipment:
5.4.1 Bubble gauge is used to test the castor, chamber and king pin
inclination angle of a motor vehicle. ✓✓ (2)
5.4.2 Turntable makes it possible to turn the front wheel to the required angle
when taking caster reading. ✓✓ (2)
5.5 Procedure to read kingpin inclination on the right-side:
• Apply brake lock ✓
• Make sure the wheels are straight ahead and the turntable is on zero ✓
• Level bubble D ✓
• Turn the wheel 20º to the right ✓
• Level bubble D ✓
• Zero the KPI scale on the left ✓
• Turn the wheel 40º to the left ✓
• Zero bubble D ✓
• Read the KPI in degree on the right-hand scale ✓ (9 x 1) (9)
5.6 Purpose of a wheel balancer:
• To balance the wheel of a vehicle, ✓ for static and dynamic balance. ✓ (2)
5.7 Advantage of using card type compressor tester:
The result is printed on the card which serves as evidence for report making. ✓ (1)
[23]
Copyright reserved Please turn over
6 MECHANICAL TECHNOLOGY (AUTOMOTIVE) (EC/SEPTEMBER 2023)
QUESTION 6: ENGINES (SPECIFIC)
6.1 Functions of crankshaft:
• It converts oscillatory motion of piston power stroke drive into rotary motion. ✓
• It drives the cam shaft that controls the engine valve timing ✓
• It transmits primary power from kick starter to the piston for an effective power
stroke that set the engine in motion. ✓ (Any 2 x 1) (2)
6.2 Causes of crankshaft vibration:
• Action of unbalanced forces upon the crankshaft ✓
• Torsional effect of the power stroke on the crankshaft ✓ (2)
6.3 Features to improve engine balance:
• Webs are extended and drilled to form balanced mass pieces at points
opposite the connecting rod. ✓
• Connecting rods and pistons are kept as light as possible. ✓
• The flywheel must be carefully fitted and balanced with the crankshaft flange. ✓
• Vibration dampers are fitted to the front of the crankshaft to smooth out engine
vibrations. ✓ (4)
6.4 Factors that determine firing order:
• Position of the cranks on the crankshaft. ✓
• Arrangement of the cams on the camshaft. ✓ (2)
6.5 Procedure to determining firing order if no specifications given:
• Remove the tappet cover to determine the intake and exhaust valve ✓
• Rotate the engine in the direction in which it runs ✓
• Watch the order in which one set of valves (inlet or exhaust) operates ✓
• This will give the order in which the inlet stroke or exhaust stroke occurs ✓
• The power strokes occur in the same order ✓ (5)
6.6 6.6.1 Turbocharger ✓ (1)
6.6.2 A – Air inlet ✓
B – Turbine housing ✓
C – Turbine wheel (exhaust) ✓
D – Exhaust inlet ✓
E – Compressor air discharge ✓
F – Compressor turbine wheel ✓ (6)
6.6.3 Converts exhaust energy to rotary motion. ✓ (1)
6.6.4 Pumps air into the inlet manifold. ✓ (1)
6.6.5 To increase engine power, ✓ and improve fuel consumption. ✓ (2)
6.6.6 It is an increase in manifold pressure that is generated by the turbocharger
in the intake manifold, ✓ which is greater that the atmospheric pressure. ✓ (2)
[28]
Copyright reserved Please turn over
(EC/SEPTEMBER 2023) MECHANICAL TECHNOLOGY (AUTOMOTIVE) 7
QUESTION 7: FORCES (SPECIFIC)
7.1 7.1.1 Swept volume:
It is the volume between the BDC ✓ and TDC in a cylinder. ✓ (2)
7.1.2 Clearance volume:
It is the volume of the space above the crown of the piston ✓ when it
is at TDC in the combustion chamber. ✓ (2)
7.1.3 Compression ratio:
It is the relationship between the total volume of a cylinder when the
piston is at BDC, ✓ to the volume of the charge in the cylinder when
the piston is at TDC. ✓ (2)
7.1.4 Mechanical efficiency:
The relationship between engine power ✓ and brake power at the
drive shaft. ✓ (2)
7.2 Methods of raising compression ratio:
• Fit a thinner gasket between cylinder block and cylinder head ✓
• Machined metals from the cylinder head ✓
• Skim metals from the cylinder block ✓
• Fit piston with a suitable higher crown ✓
• Fit crankshaft with suitable longer stroke connecting rods ✓
• Increase the bore of cylinder ✓ (Any 4 x 1) (4)
7.3 Swept volume:
𝜋𝑑2
SV = xL ✓
4
𝜋 x 8,62
SV = x 8,2 ✓
4
= 476,32 cm3 ✓ (3)
Compression ratio:
SV + CV
CR = ✓
CV
476,32+ 56
CR = ✓
56
= 9,5 : 1 ✓ (3)
Copyright reserved Please turn over
8 MECHANICAL TECHNOLOGY (AUTOMOTIVE) (EC/SEPTEMBER 2023)
7.4 7.4.1 Indicated power
P= 1 200 000 Pa ✓
80
L = 1 000 = 0,080 m ✓
𝜋𝑑2
A= 4
𝜋0.0962
= ✓
4
= 7,24 x 10-3 m2 ✓
4 800
N=
60 x 2
= 40 r/s ✓
n = 4 cylinders
Indicated power = PLANn ✓
= 1 200 000 x 0,08 x 7,24 x 10-3 x 40 x 4 ✓
= 111206,4 W
= 111,21 KW ✓ (8)
7.4.2 Brake power = 2πNT
3 600
N= ✓
60
= 60 r/s ✓
BP = 2 x π x 60 x 260 ✓
= 9 8017,69 W
= 98,02 KW ✓ (4)
7.4.3 BP
Mechanical efficiency = x 100%
IP
98,02
= x 100% ✓
111,21
= 88,14% ✓ (2)
[32]
Copyright reserved Please turn over
(EC/SEPTEMBER 2023) MECHANICAL TECHNOLOGY (AUTOMOTIVE) 9
QUESTION 8: MAINTENANCE (SPECIFIC)
8.1 Exhaust gases:
• Hydrocarbon ✓
• Carbon monoxide ✓
• Carbon dioxide ✓
• Nitrogen oxide ✓
• Sulphur dioxide ✓ (Any 3 x 1) (3)
8.2 Possible causes of high oxygen readings:
• Too lean air fuel ratio ✓
• Ignition problems ✓
• Vacuum leaks ✓
• Catalytic convertor not working ✓ (Any 2 x 1) (2)
8.3 8.3.1 Hissing sound from exhaust manifold indicate worn out exhaust valve. ✓ (1)
8.3.2 Hissing sound from the dip stick or oil cap indicates worn out rings. ✓ (1)
8.4 Fuel pressure test specifications:
• Fuel pressure at engine idle ✓
• Fuel pressure when engine is cold ✓
• Fuel pressure when engine is hot ✓
• Fuel pressure at high revolution ✓ (4)
8.5 Possible causes of low fuel pressure readings:
• Faulty fuel pump ✓
• Blocked or restricted fuel filter ✓
• Cracked or restricted fuel line ✓
• Clogged pump inlet strainer ✓
• Low voltage to the fuel pump ✓
• Faulty or failed fuel pressure regulator ✓
• Defective fuel pump relay ✓
• Empty fuel tank ✓ (Any 3 x 1) (3)
8.6 8.6.1 Possible causes of low oil pressure reading:
• Blocked oil pump sleeve in sump ✓
• Blocked or restricted oil filter ✓
• Dirty or contaminated oil ✓
• Oil leaks ✓
• Defective oil pressure release valve ✓
• Incorrect grade of oil (too thin) ✓
• Too little oil in the sump ✓ (Any 2 x 1) (2)
8.6.2 Possible solutions to a very high oil pressure readings:
• Change oil ✓
• Use the correct grade of oil ✓
• Replace oil filter ✓
• Overhaul the engine ✓
• Renew the relief valve ✓ (Any 2 x 1) (2)
8.7 Cooling system pressure test:
To detect leakage in the cooling system ✓ (1)
Copyright reserved Please turn over
10 MECHANICAL TECHNOLOGY (AUTOMOTIVE) (EC/SEPTEMBER 2023)
8.8 Radiator cap pressure testing procedure:
• Install the cap on a cooling system pressure tester ✓
• Pump the tester while watching the pressure gauge ✓
• The cap should release air at the stipulated pressure stamped on the cap ✓
• If the air is released at a pressure much greater or less than the stamped
pressure on the cap, it means that the pressure cap is faulty ✓ (4)
[23]
QUESTION 9: SYSTEMS AND CONTROL (AUTOMATIC GEARBOX) (SPECIFIC)
9.1 Purpose of automatic transmission on modern vehicles:
• It relieves the driver of clutch and gearshift operation ✓ and for effective
automated mechanical drive on the road (auto piloting) ✓ (2)
9.2 Advantages of automatic transmission:
• Reduces driving fatigue ✓
• It ensures great reduction of wheel spin under bad road conditions ✓
• Vehicle can stop suddenly without engine stalling ✓
• The system dampens out engine torsional vibration ✓
• Auto piloting can be achieved e.g., self-parking (Any 2 x 1) (2)
9.3 Operation of double epicyclic gear train in low gear:
• The turbine shaft and the primary sun gear are coupled by the front clutch. ✓
• The planet-gear carrier is held stationary by the rear brake band. ✓
• The rear clutch is dis-engaged and the front brake band is free, leaving the
secondary sun gear free. ✓
• Drive is from the primary sun gear to the primary and secondary planet
gears, which rotate around their own axis, to the annulus that is part of the
output shaft. ✓
• The secondary sun gear is also driven but performs no driving function ✓ (5)
9.4 Double epicyclic gear drive train in low gear parts label:
A – Rear brake band ✓
B – Output shaft ✓
C – Primary sun gear ✓
D – Planet gear ✓
E – Annulus ✓ (5)
9.5 Methods of cooling oil in automatic transmission:
• By using special oil cooler alongside the engine cooling radiator. ✓
• Oil circulates through a tank built into the bottom radiator tank. ✓ (2)
9.6 Function of hydraulic piston in automatic transmission:
• It controls the brake bands and multi-disc clutches ✓ allowing gear control
from one ratio to another ✓ (2)
[18]
Copyright reserved Please turn over
(EC/SEPTEMBER 2023) MECHANICAL TECHNOLOGY (AUTOMOTIVE) 11
QUESTION 10: SYSTEMS AND CONTROL (AXLES, STEERING GEOMETRY
AND ELECTRONICS) (SPECIFIC)
10.1 Functions of a steering mechanism:
• It enables the driver to be in control of the path always taken by the
vehicle, ✓ and limit tyre wear. ✓ (2)
10.2 Properties of a good steering mechanism:
• Light and easy to control ✓
• Free from vibrations and road shocks ✓
• It must be as direct as possible without needing too much driver’s attention
or effort ✓
• Self-centring ✓
• Must be able to operate effectively when affected by the action of the
suspension or brake system ✓ (Any 4 x 1) (4)
10.3 Diagram describing difference between toe-in and toe-out:
✓✓✓✓ (4)
10.4 Advantages of positive camber:
• Easier steering ✓
• Better grip on cambered road ✓
• Worn out tyres are easy to identify ✓ (3)
10.5 10.5.1 Purpose of kingpin inclination:
It is designed to bring the front wheel back to the straight-ahead
position ✓ after navigating a curve. ✓ (2)
10.5.2 Purpose of Ackermann principle:
It is designed to enable a car to navigate a curve effectively, ✓
without skidding. ✓ (2)
10.6 Pre-checks on wheels:
• Check the tyre for bruises, cracks and damaged side-walls. ✓
• Check the rim for damaged beads. ✓
• Check for foreign matter on the rim and tyres. ✓ (3)
10.7 Purpose of the catalytic converter:
It converts the pollutants in the exhaust gases of the engine, ✓ into a non-toxic
substance, making it environmentally friendly. ✓ (2)
Copyright reserved Please turn over
12 MECHANICAL TECHNOLOGY (AUTOMOTIVE) (EC/SEPTEMBER 2023)
10.8 Requirements for a catalytic converter to function properly:
• Unleaded petrol must be used. ✓
• Working temperature must not be less than 250 ºC. ✓
• The ignition system must be accurately control. ✓
• The Lambda probe exhaust gas sensor must function correctly. ✓
• Persistent misfire damages the ceramic monolith. ✓
• Burnt engine oil also damages the monolith. ✓ (Any 2 x 1) (2)
10.9 10.9.1 Diode
Allows the flow of current only in one direction and blocks it from
flowing in opposite direction. ✓✓ (2)
10.9.2 Heat sink
Absorbs the heat produced in the diode and dissipates it into the
atmosphere. ✓✓ (2)
10.9.3 Voltage regulator
Regulates the output current of the alternator by controlling the
strength its magnetic field. ✓✓ (2)
10.10 Function of a pump:
Feeds the fuel from the fuel tank to the injector or carburettor at a
predetermine pressure, ✓ at a rate higher than the maximum fuel consumption
of the engine. ✓ (2)
10.11 Advantages of electric fuel pump over a mechanical driven fuel pump
• Immediate supply of fuel as soon as the ignition key is turned on ✓
• Low operating noise ✓
• Less discharge pulsation of fuel ✓
• Compact and light in design ✓
• Characterised to prevent fuel leak ✓ (Any 2 x 1) (2)
[32]
TOTAL: 200
Copyright reserved Please turn over
Study this subject
Recommended for this subject

Question paper
Mechanical Technology Grade 12 Eastern Cape Mock 2023 QP

Memorandum
Mechanical Technology Grade 12 Eastern Cape Mock 2020 Memo

Question paper
Mechanical Technology Grade 12 Eastern Cape Mock 2020 QP

Question paper
Mechanical Technology Grade 12 Eastern Cape Mock 2020 QP
%20MEMO%20SEPT%202018_English_hlayiso.com_--b985e4dd-9a08-4ec2-a07b-64edd6f727ea/v1-e5704410f2b7cfd49bb6/card.webp)
Memorandum
Mechanical Technology Grade 12 Automotive 2018 Memo (Eng)
%20GR12%20MEMO%20SEPT%202018_English_hlayiso.com_--1b0b4dd6-b53e-485d-9068-6f378eb8c9f3/v1-7320b22b5b5eecec97b6/card.webp)
Memorandum
Mechanical Technology Grade 12 2018 Memo (Eng)
More from Grade 12 Mechanical Technology

Annual teaching plan
Gr 12 Weld Met ATP 2023 24
%20Eng--5d2e2bd0-b02f-4218-849f-e7933bc6c4d1/v1-2dba8a1dc6758c98b205/card.webp)
Question paper
Mechanical Technology Grade 12 November 2024 NSC QP (Eng)
%20Afr--1e7205e4-aef1-4cc4-afdf-aac93562ae67/v1-094abcfa5c3eff1cb995/card.webp)
Question paper
Mechanical Technology Grade 12 November 2024 NSC QP (Afr)
%20Eng--10859467-be3e-41fb-aee0-b797c385437d/v1-986e8982bfb6b966a34d/card.webp)
Question paper
Mechanical Technology Grade 12 NSC June 2024 QP (Eng)
%20Afr_hlayiso.com_--7d638feb-7218-4b3c-9f4c-ce95803d6e4f/v1-e8a08d94a30d7d50ccd0/card.webp)
Question paper
Mechanical Technology Grade 12 NSC June 2023 QP (Afr)
%20Eng_hlayiso.com_--1523a16f-2012-4f13-a922-86cbb5900666/v1-5068227f3cbbba17b78f/card.webp)
Question paper