Downloaded from hlayiso.com
NATIONAL
SENIOR CERTIFICATE
GRADE 12
SEPTEMBER 2019
CIVIL TECHNOLOGY: WOODWORKING
MARKS: 200
TIME: 3 hours
*Cvlte3*
This question paper consists of 19 pages, including 3 answer sheets.
Skip to contentAll 2019 papers 





View all%20MG%20Eng--0e265899-dc44-4809-aabf-8f374f1af392/v1-73a07814cfc9334618a1/card.webp)



%20%20MG%20Afr_hlayiso.com_--42b5315c-825c-40e3-b394-85e0253fc0fb/v1-6058b260e68654519cc3/card.webp)
%20Eng_hlayiso.com_--e6743728-8140-42ae-838d-282654a975a5/v1-dce3e047e0d7ad60a32b/card.webp)
Civil Technology Grade 12 Eastern Cape Mock 2019 QP (Eng)
Grade 12 Civil Technology question paper from the Eastern Cape Mock Exam 2019 (English), 24 pages. Read online or download the free PDF.
Civil Technology · Grade 12 · Eastern Cape Mock Exam · 2019 · English. Question paper, 24 pages. Read online or download the PDF.
- Subject
- Civil Technology
- Grade
- Grade 12
- Language
- English
- Document type
- Question paper
- Year
- 2019
- Exam period
- Eastern Cape Mock Exam
- Curriculum
- CAPS
- Pages
- 24
- File size
- 1.0 MB
Free to read online, no sign-up needed
Loading document…
Loading document…
1 of 24
This exam
Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com
2 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2019)
REQUIREMENTS:
1. ANSWER BOOK
2. Drawing instruments
3. A non-programmable pocket calculator
INSTRUCTIONS AND INFORMATION
1. This question paper consists of SIX questions: TWO questions are generic and
FOUR questions are subject specific.
2. Answer ALL the questions.
3. Answer each question as a whole. Do NOT separate subsections of questions.
4. Start the answer to EACH question on a NEW page.
5. Do NOT write in the margins of the ANSWER BOOK.
6. You may use sketches to illustrate your answers.
7. Write ALL calculations and answers in the ANSWER BOOK or on the attached
ANSWER SHEETS.
8. Use the mark allocation as a guide to the length of your answers.
9. Make drawings and sketches in pencil, fully dimensioned and neatly finished off with
descriptive titles and notes to conform to the SANS/SABS Code of Practice for
Building Drawings.
10. For the purpose of this question paper, the size of a brick should be taken as
220 mm x 110 mm x 75 mm.
11. Use your own discretion where dimensions and/or details have been omitted.
12. Answer QUESTIONS 2.2, 4.5 and 6.5 on the attached ANSWER SHEETS using
drawing instruments where necessary.
13. Write your NAME on every ANSWER SHEET and hand them in with your ANSWER
BOOK, whether you have answered the question or not.
14. Due to electronic transfer, drawings in the question paper are NOT to scale.
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2019) CIVIL TECHNOLOGY: WOODWORKING 3
QUESTION 1: SAFETY OHSA AND MATERIALS (GENERIC)
Start this question on a NEW page.
1.1 What is the maximum height of a trestle scaffold? (1)
1.2 Building rubble should never be dropped from elevated areas. Name the
correct method of disposing rubble from elevated areas. (2)
1.3 Briefly motivate why a construction site must be suitably cordoned off. (2)
1.4 Choose the correct answer from those in brackets with regards to the
construction process of stairs:
1.4.1 Stairways must be installed at least (30° / 25°) from the horizontal
platform and not more then (45° / 50°) from a wall. (2)
1.4.2 Stairways that will not be a permanent part of the building construction
must have landings of at least (760 x 560 mm / 750 x 600 mm) for
every (3,7 m / 2,5 m) or less vertical rise. (2)
1.5 FIGURE 1.5 shows a ladder that is placed against a wall. What is the correct
measurement at 1.5.A to keep it stable? Show or indicate how to achieve the
ratio.
2m
A
FIGURE 1.5 (2)
1.6 Explain the safety requirements when extending a ladder. (2)
1.7 Briefly explain the electroplating process of metals. (2)
1.8 Name THREE advantages of electroplating metals. (3 x 1) (3)
1.9 Name TWO advantages of galvanising metals. (2 x 1) (2)
[20]
Copyright reserved Please turn over
Downloaded from hlayiso.com
4 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2019)
QUESTION 2: GRAPHIC COMMUNICATING, JOINING AND EQUIPMENT
(GENERIC)
Start this question on a NEW page.
2.1 Indicate if the following statements, regarding site plans, are TRUE or FALSE.
Write only ‘true’ or ‘false’ next to the question number in your ANSWER BOOK.
2.1.1 Scale 1 : 10 is used (1)
2.1.2 Ground contours are shown (1)
2.1.3 Layout of sewage is shown (1)
2.1.4 The proposed work is indicated in red (1)
2.1.5 Floor finishes of rooms are indicated (1)
2.2 FIGURE 2.2 on ANSWER SHEET A shows an incomplete floorplan of a flat to
scale 1 : 100. Complete the floorplan by using the following information:
2.2.1 Outside door at 2.2.A (2)
2.2.2 Window at 2.2.B (2)
2.2.3 Water closet at 2.2.C (2)
2.2.4 Washbasin at 2.2.D (2)
2.2.5 Wash tub at 2.2.E (2)
2.2.6 One-way switch single pole at 2.2.F (2)
2.2.7 Fluorescent light at 2.2.G (2)
2.2.8 Socket outlet at 2.2.H (2)
2.2.9 Grease trap at 2.2.I (2)
2.2.10 Wall-mounted light at 2.2.J (2)
2.3 Identify the different types of bolts in FIGURES 2.3.1, 2.3.2 and 2.3.3.
FIGURE 2.3.1 FIGURE 2.3.2 FIGURE 2.3.3 (3)
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2019) CIVIL TECHNOLOGY: WOODWORKING 5
2.4 Answer the following questions on the tool in FIGURE 2.4.
A
D
B
C
FIGURE 2.4
2.4.1 Identify the tool in FIGURE 2.4. (1)
2.4.2 Name ONE use of this tool. (1 x 1) (1)
2.4.3 Name the different parts A–D. (4 x 1) (4)
2.4.4 Name TWO uses of a laser level. (2)
2.5 Explain why the laser level should not be stored in extremely cold areas. Refer
to the moisture inside the tool. (2)
2.6 Explain the meaning of the following code for Rawl bolts: M08/25. (2)
[40]
TOTAL SECTION A: 60
Copyright reserved Please turn over
Downloaded from hlayiso.com
6 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2019)
QUESTION 3: CASEMENTS, CUPBOARDS, WALL-PANELLING AND
QUANTITIES (SPECIFIC)
Start this question on a NEW page.
3.1 Give ONE word/term for EACH of the following descriptions by choosing a
word/term from the list below. Write only the word/term next to the question
numbers (3.1.1–3.1.3) in the ANSWER BOOK, e.g. 3.1.4 fanlight
tilting batten; soffit; reveal; panel; rebate
3.1.1 The area of the wall at the side of an opening that is at right angles to
the general face of the wall around a door and window (1)
3.1.2 A batten fixed to the eaves end of a pitched roof to maintain the roof
slope at the eaves course (1)
3.1.3 A groove or recess in woodwork to accommodate a panel or pane (1)
3.2 FIGURE 3.2 below shows the sectional view of a tongue and groove wall panel
from the floor to the ceiling, fastened to a 110 mm thick wall. Study the drawing
and answer the questions that follow.
FIGURE 3.2
3.2.1 Identify parts A–E. (5)
3.2.2 What is the function of F? (2)
3.2.3 Give TWO reasons for panelling a wall. (2)
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2019) CIVIL TECHNOLOGY: WOODWORKING 7
3.3 FIGURE 3.3 below shows the front and side elevation of a bedroom cupboard,
without doors, fitted from floor to ceiling. An incomplete cutting list specifying
some parts of the cupboard is given. Study the drawing and complete the cutting
list by providing answers to 3.3.1–3.3.7.
FIGURE 3.3
Parts Quantity Unit Length Width Thickness Total Material
length
Sides 3.3.1 mm 2 490 570 16 4 980 Oak
Rail 1 mm 3.3.2 120 16 968 Oak
Top of 1 mm 968 3.3.3 16 968 Oak
top unit
Bottom 1 mm 3.3.4 570 16 968 Oak
unit
Shelving 3 mm 570 492 16 3.3.5 Oak
Kick 1 mm 968 3.3.6 16 968 Oak
plate
Back 1 mm 2 310 1100 3.3.7 2 310 Oak (7)
Copyright reserved Please turn over
Downloaded from hlayiso.com
8 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2019)
3.4 FIGURE 3.4 below shows part of a double casement with fanlights. Study the
picture and answer the questions that follow.
FIGURE 3.4
3.4.1 Name the THREE main parts of the double casement with fanlights. (3)
3.4.2 Discuss the purpose of a transom in a casement with fanlights. (3)
3.4.3 Discuss the advantages of fanlights in a casement. (3)
3.4.4 Define a casement window. (2)
[30]
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2019) CIVIL TECHNOLOGY: WOODWORKING 9
QUESTION 4: ROOFS, CEILINGS, TOOLS, EQUIPMENT AND MATERIALS
(SPECIFIC)
Start this question on a NEW page.
4.1 FIGURE 4.1 below shows a joint-to-joint member/part of a door. Study the
drawing and answer the questions that follow.
FIGURE 4.1
4.1.1 Identify the joint construction. (1)
4.1.2 Identify parts A–D. (4)
Copyright reserved Please turn over
Downloaded from hlayiso.com
10 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2019)
4.2 FIGURE 4.2 below shows two woodworking machines. Study the pictures and
answer the questions that follow.
A B
FIGURE 4.2
4.2.1 Identify machines A and B. (2)
4.2.2 Discuss how you will take care of machine B. (3)
4.2.3 Recommend TWO ways of storing A after use. (2)
4.3 Give TWO properties of roof tiles. (2)
4.4 Name the most common traditional type of profiled roofing that is used in
South Africa. (1)
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2019) CIVIL TECHNOLOGY: WOODWORKING 11
4.5 The migration of swallows from the north to the south in summer creates a big
problem for home owners, because the birds build their nests in the eaves of
roofs.
A closed eave overhang can solve this problem. Draw therefore on ANSWER
SHEET B, to a scale of 1 : 10, a detailed sectional view of a closed eave
overhang of a roof truss.
Show the following details in your drawing:
• Wall plate 114 mm x 38 mm
• Part of the 114 mm x 38 mm tie beam
• Part of the 114 mm x 38 mm rafter
• Roof pitch 30˚
• Beam filling
• Quarter round moulding 18 mm
• Purlins 76 mm x 50 mm
• Galvanised corrugated iron roof sheeting
• Covering material for the closing of the eaves (slats, soffit board, cement
fibre board 6 mm)
• 225 mm x 30 mm fascia board
• 100 mm x 100 mm square gutter
• Downpipe 75 mm x 75 mm
• 500 mm eaves overhang (22)
4.6 Explain in your own words the difference between a hurricane clip and a gang
nail (nail plate). (1)
4.7 Discuss the difference between the following:
4.7.1 Hipped roof (1)
4.7.2 Hipped roof with a valley (1)
[40]
Copyright reserved Please turn over
Downloaded from hlayiso.com
12 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2019)
QUESTION 5: CENTERING, FORMWORK, SHORING AND GRAPHICS AS
MEANS OF COMMUNICATION (SPECIFIC)
Start this question on a NEW page.
5.1 FIGURE 5.1 shows a sketch of a lock. Study the sketch and answer the
questions that follow.
FIGURE 5.1
5.1.1 Identify the lock. (1)
5.1.2 Identify the part of the door into which the lock will be fitted. (1)
5.1.3 Name an entrance door were this lock can be fitted. (1)
5.1.4 Name the part of the lock that will be fitted into the frame of the door. (1)
5.1.5 Explain the difference between a keyhole and a lock. (2)
5.2 Explain ONE use of the following shores:
5.2.1 Double-flying shore (1)
5.2.2 Dead shore (1)
5.3 Describe the function of the following components of dead shore:
5.3.1 Sole plate (1)
5.3.2 Prop/Strut (1)
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2019) CIVIL TECHNOLOGY: WOODWORKING 13
5.4 FIGURE 5.4 below shows a pictorial view of the construction detail underneath
a centre of arch. Study the picture and answer the questions that follow.
FIGURE 5.4
5.4.1 Identify parts A–D. (4)
5.4.2 Explain ONE use of A as shown in FIGURE 5.4. (1)
5.4.3 Explain TWO purposes of part C. (2)
5.4.4 Describe the function of D. (1)
5.5 Recommend any THREE wooden board products that can be used as sides for
formwork. (3)
Copyright reserved Please turn over
Downloaded from hlayiso.com
14 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2019)
5.6 FIGURE 5.6 below shows a horizontal section of a square column.
Study FIGURE 5.6 and identify parts A–F. Write only the answer next to the
letters (A–F) in the ANSWER BOOK.
FIGURE 5.6 (6)
5.7 Explain the function of E. (2)
5.8 Explain the function of F. (1)
[30]
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2019) CIVIL TECHNOLOGY: WOODWORKING 15
QUESTION 6: SUSPENDED FLOORS, STAIRCASES, IRON MONGERY,
DOORS AND JOINING (SPECIFIC)
Start this question on a NEW page.
6.1 FIGURE 6.1 below shows the floor plan of a straight flight of stairs with a
landing. Study the picture and answer the questions that follow.
FIGURE 6.1
6.1.1 Identify parts A–H. (8)
6.1.2 Explain the purpose of a newel or newel post. (2)
6.1.3 Differentiate between stairs with a landing and stairs with a half-landing (4)
6.2 FIGURE 6.2 below shows the base of a dead shore. Study the picture and
answer the questions that follow.
FIGURE 6.2
6.2.1 Explain in your own words the function of dead shore. (2)
6.2.2 Identify the parts marked A, B and C. (3)
6.2.3 Explain the purpose of part D. (1)
Copyright reserved Please turn over
Downloaded from hlayiso.com
16 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2019)
6.3 FIGURE 6.3 below shows the sectional view of a door. Study the drawing and
answer the questions that follow.
FIGURE 6.3
6.3.1 Identify parts A, B and C. (3)
6.3.2 Explain what is meant by the muntin of a door. (1)
6.3.3 Explain the purpose of opening C in FIGURE 6.3. (2)
6.4 Explain the difference between a batten and a purlin. (4)
6.5 Draw on ANSWER SHEET C the different methods that can be used to fix floor
joists to walls. (10)
[40]
TOTAL: 200
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2019) CIVIL TECHNOLOGY: WOODWORKING 17
CIVIL TECHNOLOGY NAME:
ANSWER SHEET A GENERIC
2.2 Use the information on ANSWER SHEET A and complete the floorplan to
scale 1 : 100.
2.2.I 2.2.J
KITCHEN
2.2.C 2.2.D 2.2.E
BATHROOM
LIVING ROOM
ROOM 2.2.G
2.2.F 2.2.H
2.2.A 2.2.B
Outside door at 2.2.A 2
Window at 2.2.B 2
Water closet at 2.2.C 2
Washbasin at 2.2.D 2
Wash tub at 2.2.E 2
One-way switch-single pole at 2.2.F 2
Fluorescent light at 2.2.G 2
Socket outlet at 2.2.H 2
Grease trap at 2.2.I 2
Wall-mounted light at 2.2.J 2
TOTAL: 20
Copyright reserved Please turn over
Downloaded from hlayiso.com
Downloaded from hlayiso.com
18 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2019)
CIVIL TECHNOLOGY NAME:
ANSWER SHEET B WOODWORKING
4.5 Draw on ANSWER SHEET B to scale 1 : 10 a detailed sectional view of a
closed (concealed) eave overhang of a roof truss. (22)
CANDIDATE'S
ASSESSMENT CRITERIA MARKS MARKS
A Corrugated iron
sheeting/IBR sheeting 1
B Rafter 1
C Tie beam 1
D Wall plate 2
E Wall 2
F Plaster 2
G Downpipe 2
H Quarter-round (moulding) 1
I Soffit hanger 2
J Soffit board 2
K Gutter 2
L Fascia board 2
M Foot of purlin 1
N Purlin 1
TOTAL: 22
Copyright reserved Please turn over
Downloaded from hlayiso.com
Downloaded from hlayiso.com
(EC/SEPTEMBER 2019) CIVIL TECHNOLOGY: WOODWORKING 19
CIVIL TECHNOLOGY NAME:
ANSWER SHEET C WOODWORKING
6.5 Draw on ANSWER SHEET C the different methods that can be used to fix floor
joists to walls. (10)
ASSESSMENT CRITERIA MARKS CANDIDATE'S
MARKS
Joist build into wall 2
Floor joist 2
Scale 1
Joist bolted to wall with truss
hanger 2
Truss or joist hanger 2
Scale 1
TOTAL: 10
Copyright reserved Please turn over
Downloaded from hlayiso.com
Downloaded from hlayiso.com
Downloaded from hlayiso.com
Study this subject
Recommended for this subject

Question paper
Civil Technology Grade 12 Eastern Cape Mock 2022 QP (Eng)

Question paper
Civil Technology Grade 12 Eastern Cape Mock 2022 QP (Eng)

Question paper
Civil Technology Grade 12 Eastern Cape Mock 2021 QP (Eng)

Question paper
Civil Technology Grade 12 Eastern Cape Mock 2019 QP (Eng)

Question paper
Civil Technology Grade 12 Eastern Cape Mock 2019 QP (Afr)

Memorandum
Civil Technology Grade 12 Eastern Cape Mock 2023 Memo (Eng)
More from Grade 12 Civil Technology
%20MG%20Eng--0e265899-dc44-4809-aabf-8f374f1af392/v1-73a07814cfc9334618a1/card.webp)
Memorandum
Civil Technology Grade 12 NSC November 2025 Memo (English)

Memorandum
Civil Technology Grade 12 Eastern Cape Prelim 2024 Memo

Memorandum
Civil Technology Grade 12 Eastern Cape Prelim 2024 Memo

Memorandum
Civil Technology Grade 12 Eastern Cape Prelim 2024 Memo
%20%20MG%20Afr_hlayiso.com_--42b5315c-825c-40e3-b394-85e0253fc0fb/v1-6058b260e68654519cc3/card.webp)
Memorandum
Civil Technology Grade 12 NSC November 2023 Memo (Afrikaans)
%20Eng_hlayiso.com_--e6743728-8140-42ae-838d-282654a975a5/v1-dce3e047e0d7ad60a32b/card.webp)
Question paper