Skip to content

Civil Technology Grade 12 Civil Technology 2021 Guideline

Exam guidelineCivil TechnologyGrade 12202110 pages

Grade 12 Civil Technology exam guideline from the Civil Technology 2021 (English), 10 pages. Read online or get the free PDF download.

Free to read online, no sign-up needed

Loading document…

Loading document…

Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com CIVIL TECHNOLOGY EXAMINATION GUIDELINES GRADE 12 2021 These guidelines consist of 10 pages. Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology 2 DBE/2021 Examination Guidelines TABLE OF CONTENTS Page 1. INTRODUCTION 3 2. COGNITIVE LEVELS 4 3. STRUCTURE OF THE QUESTION PAPER 5 3.1 Construction – Structure of question paper 6 3.2 Civil Services – Structure of question paper 7 3.3 Woodworking – Structure of question paper 8 4. TYPES OF QUESTIONS SET IN A CIVIL TECHNOLOGY QUESTION PAPER 9 5. SCHOOL-BASED ASSESSMENT (SBA) 9 6. GENERAL REMARKS 9 7. CONCLUSION 10 THIS GUIDELINE DOCUMENT IS NOT A WORK SCHEDULE. IT DOES NOT REPLACE THE CONTENT IN THE CAPS DOCUMENT Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology 3 DBE/2021 Examination Guidelines 1. INTRODUCTION The Curriculum and Assessment Policy Statement (CAPS) for Civil Technology outlines the nature and purpose of the subject Civil Technology. This guides the philosophy underlying the teaching and assessment of the subject in Grade 12. The purpose of these Examination Guidelines is to:  Provide clarity on the depth and scope of the content to be assessed in the Grade 12 National Senior Certificate Examination in Civil Technology  Assist teachers to adequately prepare learners for the examinations This document deals with the final Grade 12 external examinations. It does not deal in any depth with the school-based assessment (SBA), performance assessment tasks (PATs) or final external practical examinations as these are clarified in a separate PAT document which is updated annually. These guidelines should be read in conjunction with:  The National Curriculum Statement (NCS) Curriculum and Assessment Policy Statement (CAPS): Civil Technology  The National Protocol of Assessment: An addendum to the policy document, the National Senior Certificate: A qualification at Level 4 on the National Qualifications Framework (NQF), regarding the National Protocol for Assessment (Grades R–12)  National policy pertaining to the programme and promotion requirements of the National Curriculum Statement, Grades R to 12 Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology 4 DBE/2021 Examination Guidelines 2. COGNITIVE LEVELS Bloom's Taxonomy consists of six levels, as shown below. Evaluation Synthesis Analysis Application Understanding/Comprehension Knowledge The following cognitive levels, examples of verbs and weightings are applicable to Civil Technology: COGNITIVE LEVELS – THINKING SKILLS REQUIRED LEVELS OF TYPES OF EXAMPLES OF WEIGHTING COGNITIVE DEMAND COGNITIVE DEMAND VERBS/ACTION WORDS Arrange; Choose/Select; Knowledge Define; Describe; Find; Identify; Lower order 30% Memorise and recall Label; List/Notate; information Name; Recognise; Repeat; State Classify; Comprehend; Choose/Select; Define; Describe; Discuss; Comprehension Distinguish; Explain; Generalise; Indicate; Understand/Interpret Illustrate; Infer; information in Interpret; Match; one's own words Make; Outline; Paraphrase/Revise; Middle order Restate; Summarise 50% Apply; Adapt; Calculate; Compare; Complete; Determine; Application: Discover; Draw; Explain; Gather; Apply knowledge to new Identify; Illustrate; situations Modify; Operate; Prepare; Show; Sketch; Solve; Use Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology 5 DBE/2021 Examination Guidelines Analysis Analyse; Classify; Categorise; Compare; Breakdown knowledge Contrast; Differentiate; into parts and show Critique; Discriminate; relationship between Distinguish; Examine; parts. Investigate; Test Arrange; Assemble; Synthesis Combine; Compose; Construct; Create; Bring together parts of Depict; Design; Develop; knowledge to form a Find errors/Find out; Higher order whole. Formulate; Incorporate; 20% Integrate; Invent; Build relationships for Organise; Plan; new situation Problem solving; Produce; Structure Appraise; Assess; Comment on; Compare; Evaluation Critically analysis; Conclude; Explain; Make judgments on Evaluate; Interrogate; basis of criteria Infer; Judge; Predict; Recommend; Study NOTE: The level of difficulty will not be determined by the verb used but rather by the context of the question/content assessed. 3. STRUCTURE OF THE QUESTION PAPER These examination guidelines have been compiled in line with the CAPS document (issued in 2014) that focuses on specialisation in technical subjects. These guidelines should be used in conjunction with the content outline per term and Section 4 of the CAPS document for Grade 12 Civil Technology. The SANS/SABS Code of Practice for Building Drawings must also be adhered to. The duration of the final examination paper is 3 hours. The maximum mark is 200 and the paper will consist of SIX questions. The summative assessment (examinations) will cater for a range of cognitive levels and abilities of learners.  In EACH specialisation, the GENERIC part consists of the same questions and the same weighting. This part consists of TWO questions.  In EACH specialisation, the SPECIFIC part focuses only on content applicable to that specialisation. This part consists of FOUR questions. There will be SEPARATE question papers for EACH of the specialisations. There will be SIX questions in each paper. Candidates must answer ALL SIX the questions in the paper. Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology 6 DBE/2021 Examination Guidelines 3.1 Construction – Structure of the question paper TOTAL MARKS QUESTION CONTENT TIME GENERIC – SECTION A OHSA, Safety Materials 1 20 18 minutes Tools and Equipment Joining Interpretation of advanced drawings:  Site plan, floor plan and elevation of multi- storey buildings (including calculations of area, perimeter and length of a wall by deducing dimensions from the given 2 drawings) 40 36 minutes  Basic drawing symbols relating to the built environment in accordance with the SANS for Building Drawings (candidates must be able to interpret draw basic drawing symbols relating to the built environment) SUBJECT SPECIFIC – SECTION B Roofs 3 Staircases 30 27 minutes Joining (Subject specific) Excavations Formwork 4 40 36 minutes Tools and Equipment (Subject specific) Materials (Subject specific) Plaster and screed 5 Brickwork 30 27 minutes Graphics as Means of Communication Reinforcement in Concrete Foundations 6 40 36 minutes Concrete Floors Quantities (Subject specific) 180 GRAND TOTAL: 200 minutes Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology 7 DBE/2021 Examination Guidelines 3.2 Civil services – Structure of the question paper TOTAL MARKS QUESTION CONTENT TIME GENERIC – SECTION A OHSA, Safety Materials 1 20 18 minutes Tools and Equipment Joining Interpretation of advanced drawings:  Site plan, floor plan and elevation of multi- storey buildings (including calculations of area, perimeter and length of a wall by deducing dimensions from the given 2 drawings) 40 36 minutes  Basic drawing symbols relating to the built environment in accordance with the SANS for Building Drawings (candidates must be able to interpret basic drawing symbols relating to the built environment) SUBJECT SPECIFIC – SECTION B Construction Associated with Civil Services 3 OHSA, Safety (Subject specific) 30 27 minutes Quantities (Subject specific) Cold-water Supply Hot-water Supply 4 40 36 minutes Tools and Equipment (Subject specific) Materials (Subject specific) Graphics as Means of Communication (Pattern Development) 5 30 27minutes Roof Work Storm Water Above-ground Drainage (Sewerage) Below-ground Drainage (Sewerage) 6 40 36 minutes Sanitary Fitments Joining (Subject specific) 180 GRAND TOTAL: 200 minutes Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology 8 DBE/2021 Examination Guidelines 3.3 Woodworking – Structure of the question paper TOTAL MARKS QUESTION CONTENT TIME GENERIC – SECTION A OHSA, Safety Materials 1 20 18 minutes Tools and Equipment Joining Interpretation of advanced drawings:  Site plan, floor plan and elevation of multi- storey buildings (including calculations of area, perimeter and length of a wall by deducing dimensions from the given 2 drawings) 40 36 minutes  Basic drawing symbols relating to the built environment in accordance with the SANS for Building Drawings (candidates must be able to interpret basic drawing symbols relating to the built environment) SUBJECT SPECIFIC – SECTION B Casements Cupboards 3 30 27 minutes Wall-panelling Quantities (Subject specific) Roofs Ceilings 4 40 36 minutes Tools and Equipment (Subject specific) Materials (Subject specific) Centering Formwork 5 30 27 minutes Shoring Graphics as Means of Communication Suspended Floors Staircases 6 Ironmongery 40 36 minutes Doors Joining 180 GRAND TOTAL: 200 minutes Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology 9 DBE/2018 Examination Guidelines 4. TYPES OF QUESTIONS TO BE SET IN A CIVIL TECHNOLOGY QUESTION PAPER The question paper will consist of various types of questions including, but not limited to, the following:  Matching items  Multiple choice  Give ONE word/term for each of the following descriptions by choosing a word/term from the list below.  Questions where candidates will have to be able to state facts, compare, differentiate, describe, explain concepts and identify faults with recommendations and statements.  Drawings and sketches related to the curriculum in order to demonstrate the compilation, working principles and other aspects of subject matter. 5. SCHOOL-BASED ASSESSMENT (SBA) Section 4 Assessment: On page 106 the weighting of Grade 12 SBA marks is incorrectly indicated in the Civil Technology CAPS. The weighting should be 5 of the 25 (20%) for term 1 test and 10 out of 25 (40%) for the June and preparatory exams respectively. SBA marks for Civil Technology need to be calculated as indicated above. 6. GENERAL REMARKS 6.1 Candidates need to be aware that markers can only mark what the candidate wrote. Markers may not interpret what they think the candidate meant. It is therefore very important that candidates write well-constructed sentences and structure responses in a logical and chronological manner. Correct subject terminology need to be enforced as marks is not awarded for incorrect subject terminology. 6.2 For calculations:  A mark is only awarded if the correct unit is written next to the answer.  Where the candidate made a principle error, e.g. added instead of multiplying, no marks will be awarded for the calculation. 6.3 For drawings:  The member for which the mark should be awarded should be drawn correctly in the correct position to receive a mark.  Marks can only be awarded for a label if the label indicates the correct member. 6.4 When a candidate drew the wrong drawing, e.g.:  A horizontal section instead of a vertical section, no marks will be allocated for the drawing as the candidate did not respond to the expected outcome.  An orthographic view instead of sectional view, no marks will be allocated to the drawing as the candidate did not respond to the expected outcome.  An orthographic view instead of an isometric view, no marks will be allocated to the drawing as the candidate did not respond to the expected outcome. Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology 10 DBE/2018 Examination Guidelines 7. CONCLUSION This Examination Guidelines document is meant to articulate the assessment aspirations espoused in the CAPS document. It is therefore not a substitute for the CAPS document which teachers should teach to. Qualitative curriculum coverage as enunciated in the CAPS cannot be overemphasised. Copyright reserved

Study this subject

More from Grade 12 Civil Technology

View all