Downloaded from hlayiso.com
NATIONAL
SENIOR CERTIFICATE
GRADE 12
SEPTEMBER 2018
MECHANICAL TECHNOLOGY: WELDING AND
METAL WORK
MARKING GUIDELINE
MARKS: 200
This marking guideline consists of 16 pages.
Skip to contentAll 2018 papers %20GR12%20MEMO%20SEPT2018_Afr_hlayiso.com_--d74666de-06b9-446d-98ca-94cade40ab22/v1-552c877c5172d3a1c8a5/card.webp)
%20GR12%20MEMO%20SEPT2018_Afr%20D_hlayiso.com_--0b0b899c-4ee4-4ee8-898e-bdae811e67f4/v1-eb81ce9f70751a4c0f9c/card.webp)
%20GR12%20MEMO%20SEPT%202018_English_hlayiso.com_--1b0b4dd6-b53e-485d-9068-6f378eb8c9f3/v1-7320b22b5b5eecec97b6/card.webp)
%20GR12%20QP%20SEPT%202018_Afrikaans_hlayiso.com_--c1024fd4-200a-4d46-9c99-f73e378081f6/v1-33d87fafab028045bbcf/card.webp)
%20MEMO%20SEPT%202018_Eng%20D_hlayiso.com_--755d4907-fba9-478a-9a6d-cded15048da7/v1-868d7b898ccf0664f121/card.webp)
%20MEMO%20SEPT%202018_Afr%20D_hlayiso.com_--3f2fad2e-2e8e-494d-b250-7a3f03f1b1e3/v1-95685df1efadb707fb28/card.webp)
View all
%20Eng--5d2e2bd0-b02f-4218-849f-e7933bc6c4d1/v1-2dba8a1dc6758c98b205/card.webp)
%20Afr--1e7205e4-aef1-4cc4-afdf-aac93562ae67/v1-094abcfa5c3eff1cb995/card.webp)
%20Eng--10859467-be3e-41fb-aee0-b797c385437d/v1-986e8982bfb6b966a34d/card.webp)


Mechanical Technology Grade 12 2018 Memo (Eng)
Grade 12 Mechanical Technology memorandum from the Welding And Metal Work 2018 (English), 16 pages. Read online or download the free PDF.
Mechanical Technology · Grade 12 · Welding and Metal Work · 2018. Memorandum, 16 pages. Read online or download the PDF.
- Subject
- Mechanical Technology
- Grade
- Grade 12
- Document type
- Memorandum
- Year
- 2018
- Exam period
- Welding And Metal Work
- Curriculum
- CAPS
- Pages
- 16
- File size
- 357.4 KB
Free to read online, no sign-up needed
Loading document…
Loading document…
1 of 16
This exam
Welding and Metal Work 2018
Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com
2 MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) (EC/SEPTEMBER 2018)
QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC)
1.1 D9 (1)
1.2 C9 (1)
1.3 D9 (1)
1.4 D9 (1)
1.5 D9 (1)
1.6 B9 (1)
[6]
QUESTION 2: SAFETY (GENERIC)
2.1 Unsafe conditions:
x Working at unsafe speeds. 3
x Grinding without goggles. 3
x Fooling and playing around workshop. 3
x Spilling liquids on floor. 3
x Lubricating/cleaning moving parts. 3
x Wearing loose clothing near moving parts. 3
x Grinding on the side of the grinding wheel. 3 (Any 4 x 1) (4)
2.2 Assessing a first aid situation:
x Environmental observation. 3
x Visible signs and symptoms. 3
x Indicators to diagnosis. 3
x Vital functions. 3
x Stopping any serious bleeding. 3
x Immediate treatment of cardiac arrest. 3 (Any 2 x 1) (2)
2.3 2.3.1 Advantages of product layout:
x Handling of material is limited to a minimum. 3
x Time period of manufacturing cycle is less. 3
x Production control is almost automatic. 3
x Greater use of unskilled labour is possible. 3
x Less total inspection is required. 3
x Less total floor space is needed per unit of production. 3(Any 2 x 1) (2)
2.3.2 Advantages of the process layout of machines
x High machine utilisation because more than one product is
manufactured. 3
x Better supervision as a result of subdivision of processes. 3
x Less interruption in flow of work when machines become
defective. 3
x Lower equipment cost, since one machine can produce more than
one product. 3
x Better control of total manufacturing cost. 3
x Greater flexibility in the production process. 3 (Any 2 x 1) (2)
[10]
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2018) MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) 3
QUESTION 3: MATERIALS (GENERIC)
3.1 Purpose of case-hardening.
The objective is to produce a hard case over a tough core. 33 (2)
3.2 Factors of hardness.
x Work piece size 3
x Quenching rate 3
x Carbon content 3 (3)
3.3 Four kinds of quenching mediums.
x Water and salt (brine) 3
x Tap water 3
x Liquid salts 3
x Molten lead 3
x Soluble oil and water 3
x Oil 3 (Any 4 x 1) (4)
3.4 Reason for hardened steel to be tempered:
To reduce brittleness 3 and to give the workpiece a more fine-grained
structure 3 (2)
3.5 Test on materials:
Type of Test Mild Steel High Speed Steel Cast Iron
Sound Test Medium metallic sound 3 Low ring sound 3 Dull sound 3 (3)
[14]
QUESTION 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC)
4.1 D9 (1)
4.2 C9 (1)
4.3 B9 (1)
4.4 D9 (1)
4.5 A9 (1)
4.6 C9 (1)
4.7 B9 (1)
4.8 B9 (1)
4.9 A9 (1)
4.10 B 9 (1)
4.11 D 9 (1)
4.12 D 9 (1)
Copyright reserved Please turn over
Downloaded from hlayiso.com
4 MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) (EC/SEPTEMBER 2018)
4.13 B9 (1)
4.14 D9 (1)
[14]
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2018) MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) 5
QUESTION 5: TERMINOLOGY (TEMPLATES, ROLLING AND BENDING)
(SPECIFIC)
5.1 Advantages of lattice girders:
Lattice girders tend to be very rigid 3 and give good strength to weight ratios
over long spans. 3 (2)
5.2 Calculation on basketball hoop:
Mean Ø = Outside Ø – Bar thickness
Mean Ø = Inside Ø + Plate thickness
Mean Ø = 380 + 16 mm
= 396 mm
Mean circumference = ߨൈ݉݁ܽ݊ߠ3
= ߨൈ͵ͻ3
= 1 244,23 3
= 1 244 mm 3 (4)
5.3 Weld symbol:
3
3 (2)
5.4 Template loft:
It is a very important section of a structural workshop, 3 usually away from the
main workshop where quietness and better light facilities are available. 3 (2)
5.5 Purpose of purlins:
To support the roof coverings 33 (2)
5.6 Sketches of different templates:
5.6.1 Flange template
333 (3)
Copyright reserved Please turn over
Downloaded from hlayiso.com
6 MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) (EC/SEPTEMBER 2018)
5.6.2 Strip template
333 (3)
5.6.3 Web template
333 (3)
5.7 Basic principles of marking-off:
x Measure accurately 3
x Show all detail 3
x Scribe lines must be clearly visible
x Use a prick punch to make lines clearer and permanent (Any 2 x 1) (2)
[23]
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2018) MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) 7
QUESTION 6: TOOLS AND EQUIPMENT (SPECIFIC)
6.1 6.1.1 Bench grinder 3
Function:
It is used to drive abrasive wheels, which hand grind cutting tools and
perform other rough grinding. 3 (2)
6.1.2 Power-driven guillotine 3
Function:
To cut plates. 3 (2)
6.1.3 Power saw 3
Function:
It is used to roughly cut large sections of metal before they are further
machined or used in manufacturing. 3 (2)
6.1.4 Pedestal drill press 3
Function:
Used to drill a wide variety of materials including ferrous and non-ferrous
metals and composite plastics. 3 (2)
6.1.5 Hydraulic press 3
Function:
To install or remove components, such as bearings or bushes, in
mechanical devices 3 (2)
6.1.6 Oxy- acetylene equipment: 3
Function:
To enable gas welding or cutting, by means of the oxy-acetylene flame 3 (2)
6.2 Drill bit sizes
6.2.1 8 mm 6, 8 mm to be drilled 3 (1)
6.2.2 10 mm 8, 5 mm to be drilled 3 (1)
6.3 Power saw
The blade is tensioned in the frame and cuts in a forward and backwards
(reciprocating) motion similar to that of a hacksaw. 3 (1)
6.4 Type of roller
Pyramid bending rolls 3 (1)
Copyright reserved Please turn over
Downloaded from hlayiso.com
8 MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) (EC/SEPTEMBER 2018)
6.5 Cutting limitations of plasma cutters:
Hand held torches can cut up to 38 mm thick 3
Computer controlled torches can cut up to 150 mm thick plates 3 (2)
[18]
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2018) MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) 9
QUESTION 7: FORCES (SPECIFIC)
7.1 7.1.1 RR: RL X 8 = (10 x 2) + ( (6 x 5) 3
= 20 + 30
= 50 3
RL = 6,25 N3
RL: RR X 8 = (6 x 3) + (10 x 6) 3
= 18 + 60
= 78 3
RR = 9,75 N 3 (6)
10 N
B
6N
C
G
A
H
F
E
2000 2000 4000
RL D RR
DIAGRAM 7.1
Copyright reserved Please turn over
Downloaded from hlayiso.com
10 MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) (EC/SEPTEMBER 2018)
7.1.2
3 3
3
3
3
3
3 3
3
3
(10)
7.2 Definitions:
Strain: Is the ratio between the change in length and the original length and is
expressed as a constant. 33 (2)
Stress: It is an external force applied to an object. Force per unit area. 33 (2)
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2018) MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) 11
7.3 Stress =
ௗ
3
ଵయ
= రఱరఱ 33
భబల
ଵయ ଵల
= 3
ସହସହ
ଵవ
= 3
ଶଶହ
= 29 629 629,63 Pa 3
OR
= 29,63 MPa
ௌ்ோாௌௌ
E = 3
ௌ்ோூே
ଶଽଶଽଶଽǡଷ
= 3
ଵହଵవ
Strain = 1,975308 x ͳͲିଷ 3
ுேீாூோேீ்ு
STRAIN = 3
ைோூீூோேீ்ு
= 1,975308 x ͳͲିସ x 2 m 3
Change in Length = 3,95 X ͳͲିସ3
= 0,395 mm 3 (13)
[33]
Copyright reserved Please turn over
Downloaded from hlayiso.com
12 MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) (EC/SEPTEMBER 2018)
QUESTION 8: JOINING METHODS (SPECIFIC)
8.1 Non-destructive tests:
x Liquid dye penetrant test 3
x X-Ray test 3
x Ultrasonic test 3 (3)
8.2 Nick-break test:
x Make a hacksaw cut through the centre of the weld. 3
x Cut should be about 6,5 mm deep. 3
x Place the saw-nicked specimen on two steel supports. 3
x Use a sledgehammer to break the specimen by striking it in the zone where
you made the saw cuts. 3
x The weld metal exposed in the break should be completely fused and should
be free from slag inclusions and contain no gas pockets greater than 1,6 mm.3
x There should be not more than one pore or gas pocket per square centimetre. (5)
8.3 Factors of a good arc:
x The surface condition 3
x The travel speed 3
x The welding current 3
x The arc voltage 3
x The angle of the torch/electrode/shroud (Any 4 x 1) (4)
8.4 Welding defects:
x Incomplete penetration 3
x Lack of fusion 3
x Porosity 3
x Undercutting 3
x Distortion
x Cracks
x Spatter
x Slag inclusion (Any 4 x 1) (4)
8.5 Methods to reduce stress:
Peening 3
Controlled heating, followed by controlled cooling 3 (2)
8.6 Welding spatter:
It is the little droplets of molten material that are generated at or near the welding
arc. 33
It is generally regarded as a nuisance and is a critical factor to consider when
developing an application. (2)
8.7 Cause of spatter:
A disturbance in the molten weld pool during the transfer of wire into the
weld, 3caused by voltage being too low or amperage being too high. 3 (2)
8.8 Oxy-acetylene mild steel flame:
Neutral flame 3 (1)
[23]
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2018) MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) 13
QUESTION 9: JOINING METHODS (STRESSES AND DISTORTION) (SPECIFIC)
9.1
333 (9)
333
333
9.2 Types of cracks:
HAZ(Heat affected zone)cracks 3
Centre line cracks 3
Crater cracks 3
Transverse cracks 3 (4)
9.3 Criteria for free bend test:
It measures the ductility of the weld deposit and the heat affected area
adjacent to the weld. 3
It is used to determine the percentage of elongation of the weld metal. 3 (2)
9.4 Advantages of liquid dye over X-ray or ultra-sonic test:
x Good for ferrous and non-ferrous metals 3
x Low cost 3
x Easy to apply and interpret 3
x Minimal training required (Any 3 x 1) (3)
Copyright reserved Please turn over
Downloaded from hlayiso.com
14 MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) (EC/SEPTEMBER 2018)
QUESTION 10: MAINTENANCE (SPECIFIC)
10.1 Results of a lack of lubrication:
Overloading 3
Friction 3 (2)
10.2 Definition of friction:
Rubbing of one part 3 against another 3 (2)
10.3 Overloading:
Excessive loads on machine parts 3
Running a machine or device at a rate higher than at which it was designed
to operate 3 (2)
10.4 Consequences of overloading –guillotine:
Cutting plate of excessive thickness or hardness will damage both the
blade 3and hydraulic system, resulting in costly damage 3 (2)
[8]
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2018) MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) 15
QUESTION 11: TERMINOLOGY (DEVELOPMENT) (SPECIFIC)
11.1
11.1.1 A – B : (1 – 2) =
ଷ
3
ଵଶ
ͻͶǡʹ
= ͳʹ 3
= 7,85 3 (3)
11.1.2 (A – 1) : X – 1 = ඥሺ ݔെ ܴሻଶ ݄ଶ 3
= ඥሺͶͷ െ ͳͷሻଶ ͷͲଶ 3
= 73,65 3 (3)
11.1.3 (1 – a) = ඥሺ͵ǡͷଶ ͵ʹଶ ͷͲଶ 33
= 70,2 33 (4)
11.1.4 2–a = ඥሺͶͷ െ ͳͷͲ͵ݏܥ + (45 – 15 Sin ͵Ͳ + ͷͲଶ 3
= ඥሺ͵ʹଶ + ͵ǡͷଶ + ͷͲଶ ሻ 3
= ඥͶͻ͵Ͳǡʹͷ 3
= 70,2 3 (4)
11.1.5 a - 3 = ඥሺͶͷ െ ͳͷͲ͵ݏܥ + (45 – 15 Sin ͵Ͳ + ͷͲଶ ሻ 3
= ඥሺ͵ʹଶ + ͵ǡͷଶ + ͷͲଶ ሻ 3
= ඥͶͻ͵Ͳǡʹͷ 3
= 70,2 3 (4)
Copyright reserved Please turn over
Downloaded from hlayiso.com
16 MECHANICAL TECHNOLOGY (WELDING AND METAL WORK) (EC/SEPTEMBER 2018)
3 3
3 3 3
3
3
3 3 3
3 3 3
3
3
(15)
[33]
TOTAL: 200
Copyright reserved Please turn over
Study this subject
Recommended for this subject
%20GR12%20MEMO%20SEPT2018_Afr_hlayiso.com_--d74666de-06b9-446d-98ca-94cade40ab22/v1-552c877c5172d3a1c8a5/card.webp)
Memorandum
Mechanical Technology Grade 12 2018 Memo (Afr)
%20GR12%20MEMO%20SEPT2018_Afr%20D_hlayiso.com_--0b0b899c-4ee4-4ee8-898e-bdae811e67f4/v1-eb81ce9f70751a4c0f9c/card.webp)
Memorandum
Mechanical Technology Grade 12 2018 Memo (Afr)
%20GR12%20MEMO%20SEPT%202018_English_hlayiso.com_--1b0b4dd6-b53e-485d-9068-6f378eb8c9f3/v1-7320b22b5b5eecec97b6/card.webp)
Memorandum
Mechanical Technology Grade 12 2018 Memo (Eng)
%20GR12%20QP%20SEPT%202018_Afrikaans_hlayiso.com_--c1024fd4-200a-4d46-9c99-f73e378081f6/v1-33d87fafab028045bbcf/card.webp)
Question paper
Mechanical Technology Grade 12 2018 QP (Afr)
%20MEMO%20SEPT%202018_Eng%20D_hlayiso.com_--755d4907-fba9-478a-9a6d-cded15048da7/v1-868d7b898ccf0664f121/card.webp)
Memorandum
Mechanical Technology Grade 12 Automotive 2018 Memo (Eng)
%20MEMO%20SEPT%202018_Afr%20D_hlayiso.com_--3f2fad2e-2e8e-494d-b250-7a3f03f1b1e3/v1-95685df1efadb707fb28/card.webp)
Memorandum
Mechanical Technology Grade 12 Automotive 2018 Memo (Afr)
More from Grade 12 Mechanical Technology

Annual teaching plan
Gr 12 Weld Met ATP 2023 24
%20Eng--5d2e2bd0-b02f-4218-849f-e7933bc6c4d1/v1-2dba8a1dc6758c98b205/card.webp)
Question paper
Mechanical Technology Grade 12 November 2024 NSC QP (Eng)
%20Afr--1e7205e4-aef1-4cc4-afdf-aac93562ae67/v1-094abcfa5c3eff1cb995/card.webp)
Question paper
Mechanical Technology Grade 12 November 2024 NSC QP (Afr)
%20Eng--10859467-be3e-41fb-aee0-b797c385437d/v1-986e8982bfb6b966a34d/card.webp)
Question paper
Mechanical Technology Grade 12 NSC June 2024 QP (Eng)

Memorandum
Mechanical Technology Grade 12 Eastern Cape Mock 2023 Memo

Memorandum