Skip to content

Mechanical Technology Grade 12 Eastern Cape Prelim 2024 Memo

MemorandumMechanical TechnologyGrade 12202415 pages

Grade 12 Mechanical Technology memorandum from the Eastern Cape Prelim Exam 2024 (English), 15 pages. Read online or download the free PDF.

Free to read online, no sign-up needed

Loading document…

Loading document…

Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com NATIONAL SENIOR CERTIFICATE GRADE 12 SEPTEMBER 2024 MECHANICAL TECHNOLOGY: WELDING AND METALWORK MARKING GUIDELINE MARKS: 200 This marking guideline consists of 14 pages. Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com 2 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2024) QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC) 1.1 B✓ (1) 1.2 A✓ (1) 1.3 C✓ (1) 1.4 C✓ (1) 1.5 A✓ (1) 1.6 D✓ (1) [6] QUESTION 2: SAFETY (GENERIC) 2.1 Gas cylinder safety precautions: • Always store and use gas cylinders in an upright position. ✓ • Never stack cylinders on top of one another. ✓ • Do not bang or work on the cylinders. ✓ • Never allow cylinders to fall. ✓ • No oil and grease should come into contact with gas cylinders or fittings. ✓ • Keep the caps on the cylinders for protection. ✓ (Any 2 x 1) (2) 2.2 Employers’ responsibility regarding safety: • Provide and maintain working systems, work area, equipment and tools in a safe condition. ✓ • Eliminate or reduce any hazard or potential hazard. ✓ • Produce, handle, store and transport goods safely. ✓ • Ensure that every person employed complies with the requirements of this Act. ✓ • Enforce measures, if necessary, in the interest of health and safety. ✓ • Appoint a person who is trained and who have the authority to ensure that employee take precautionary measures. ✓ (Any 2 x 1) (2) 2.3 Safety precautions before switching on the angle grinder: • Make sure that there are no cracks or chips on the disc. ✓ • Make sure that there are no flammable materials nearby. ✓ • Ensure that guards are in place. ✓ • Wear the appropriate PPE especially eye protection. ✓ (Any 2 x 1) (2) 2.4 Welding goggles: • To protect your eyes against sparks. ✓ • To protect your eyes against heat. ✓ • To see where to weld. ✓ (Any 2 x 1) (2) 2.5 Disadvantages of process layout: • Production is not always continuous. ✓ • Transportation costs between process departments may be high. ✓ • Additional time is spent in testing and sorting as the product moves to the different departments. ✓ • Damage to fragile goods may result from extra handling. ✓ (Any 2 x 1) (2) [10] Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com (EC/SEPTEMBER 2024) MECHANICAL TECHNOLOGY (WELDING AND METALWORK) 3 QUESTION 3: MATERIALS (GENERIC) 3.1 Reason to cut from the unmarked end: • Marking does not get lost ✓ • Be able to identify the material ✓ (Any 1 x 1) (1) 3.2 Heat-treatment processes properties: PROCESS PROPERTY 3.2.1 Hardening Very hard, high tensile strength and brittle ✓ 3.2.2 Tempering Tough, hard ✓ 3.2.3 Annealing Soft, ductile, low tensile strength ✓ 3.2.4 Normalising Tough and machinable ✓ (4) 3.3 Heat-treatment process steps: • Heat the metal slowly to a temperature below the critical temperature. ✓ • Soak it at that temperature for a period. ✓ • Quench / cool in an appropriate quenching medium. ✓ (3) 3.4 Quenching media: • Water  • Brine  • Oil  (3) 3.5 Types of tests: 3.5.1 Filing test ✓ (1) 3.5.2 Spark test ✓ (1) 3.5.3 Bending test ✓ (1) [14] Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com 4 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2024) QUESTION 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC) 4.1 A✓ (1) 4.2 D✓ (1) 4.3 C✓ (1) 4.4 C✓ (1) 4.5 B✓ (1) 4.6 A✓ (1) 4.7 C✓ (1) 4.8 B✓ (1) 4.9 C✓ (1) 4.10 D✓ (1) 4.11 A✓ (1) 4.12 C✓ (1) 4.13 B✓ (1) 4.14 D✓ (1) [14] Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com (EC/SEPTEMBER 2024) MECHANICAL TECHNOLOGY (WELDING AND METALWORK) 5 QUESTION 5: TERMINOLOGY (TEMPLATES) (SPECIFIC) 5.1 Template loft is separated from the workshop because: • It is quieter ✓ • The lighting is better ✓ • All equipment is at hand ✓ • It is a permanent base ✓ • Marking on the floor enhance accuracy ✓ (Any 3 x 1) (3) 5.2 5.2.1 OSU ✓ (1) 5.2.2 Galvanised ✓ (1) 5.2.3 This side up ✓ (1) 5.3 Dimensions of the required material: 5.3.1 Mean diameter = Outside diameter – plate thickness = 600 – 20 ✓ = 580 mm ✓ (2) 5.3.2 Mean circumference = 𝜋 x mean diameter ✓ = 𝜋 x 580 ✓ = 1 822,13 mm = 1 822 mm ✓ (3) 5.4 Welding elements: A ‒ Tail ✓ B ‒ Weld symbol (Fillet weld) ✓ C ‒ Pitch of weld ✓ D ‒ Site weld ✓ E ‒ Arrow ✓ F ‒ Weld all round ✓ (6) 5.5 Template loft machine tools: • Circular saw ✓ • Planer ✓ • Drilling machine ✓ • Jig saw ✓ • Sanding machine ✓ • Shears for cutting cardboard ✓ • Welding machine ✓ • Angle grinder ✓ • Bench grinder ✓ • Guillotine ✓ • Cut-off power saw ✓ (Any 2 x 1) (2) Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com 6 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2024) 5.6 Resistance welding symbols: 5.6.1 Spot weld symbol: ✓✓ (2) 5.6.2 Projection weld symbol: ✓✓ (2) [23] QUESTION 6: TOOLS AND EQUIPMENT (SPECIFIC) 6.1 Workshop machines and their functions: 6.1.1 Pedestal drill press ✓ Function: • Used to drill a wide variety of materials including ferrous and non- ferrous metals and composite plastics. ✓ (2) 6.1.2 Hydraulic press ✓ Function: • To install or remove components, such as bearings or bushes, in mechanical devices. ✓ (2) 6.1.3 Bench grinder ✓ Function: • Used for grinding, sharpening tools and removing excess material. ✓ (2) 6.2 Gas welding equipment: 6.2.1 Regulator ✓ (1) 6.2.2 A ‒ Gauge ✓ B ‒ Outlet ✓ C ‒ Inlet ✓ D ‒ Pressure adjusting knob ✓ (4) 6.3 Operating principle of a power-driven guillotine: Power driven guillotine: • A bottom cutting blade is fixed horizontally. ✓ • A top cutting blade moves downwards. ✓ • It is driven by an electric motor activated by a foot pedal. ✓ • It is driven by a flywheel, gearbox, and axle. ✓ • It lowers the blade by eccentric motion or action. ✓ (4) 6.4 Manual guillotine labels: A ‒ Spring-loaded down pedal/foot pedal ✓ B ‒ Cutting table ✓ C ‒ Pressure plate/Blade guard ✓ (3) [18] Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com (EC/SEPTEMBER 2024) MECHANICAL TECHNOLOGY (WELDING AND METALWORK) 7 QUESTION 7: FORCES (SPECIFIC) 7.1 Space diagram: Scale 1 : 100 500 N 100 N (4 marks) 200 N 400 N Force diagram (NOTE: Diagram is NOT according to scale; markers must redraw the diagram.) Scale: 1 mm = 5N (5 marks) MEMBER FORCE(N) NATURE AE 275 N ✓ STRUT ✓ EF 425 N ✓ STRUT ✓ FC 300 N ✓ STRUT ✓ BF 200 N ✓ TIE ✓ ED 200 N ✓ TIE ✓ (10 marks) NOTE: (Tolerance:  2 mm) (2 mm = 10 N) (19) Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com 8 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2024) 7.2 Calculating reaction forces: 7.2.1 Take moments about RL: (5  3) + (3  7) = RR  10 ✓ 15 + 21 =10 RR 36 = 10 RR ✓ 36 = RR 10 3,6 KN = RR ✓ Take moments about RR: (3  3) + (5  7) = 10  RL ✓ 9 + 35 = 10 RL 44 = 10 RL ✓ 44 = RL 10 4,4 KN = RL ✓ (6) 7.2.2 Calculating Bending Moments: BMA= (4,4  0) = 0 KN.m ✓ BMB= (4,4  3) = 13,2 KN.m ✓ BMC = (4,4  7) ‒ (5  4) – (3 x 0) = 30,8 ‒ 20 ‒ 0 = 10,8 KN.m ✓ BMD= (4,4  10) ‒ (5  7) ‒ (3  3) = 44 − 35 − 9 = 0 KN.m ✓ (4) Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com (EC/SEPTEMBER 2024) MECHANICAL TECHNOLOGY (WELDING AND METALWORK) 9 7.2.3 Bending moment diagram: NOTE: Diagram NOT drawn to scale. (4) 7.3 Stress and Strain: 7.3.1 Stress 𝐹𝑜𝑟𝑐𝑒 𝜋 × (38)2 𝑠𝑡𝑟𝑒𝑠𝑠 = 𝐴𝑟𝑒𝑎 ✓ 𝐴𝑟𝑒𝑎 = 106 ✓ = 4,536459792  10−3 ✓ 100 × 103 𝑠𝑡𝑟𝑒𝑠𝑠 = 𝜋(38)2 ✓ 106 = 22 043 620,93 𝑃𝑎 ✓ = 22,04 𝑀𝑃𝑎 ✓ (6) 7.3.2 Strain ∆𝑙 𝑠𝑡𝑟𝑎𝑖𝑛 = 𝑜𝑙 ✓ 0,5 𝑠𝑡𝑟𝑎𝑖𝑛 = 150 ✓ = 3,333333333 × 10−3 ✓ = 3,33 × 10−3 (3) 7.3.3 Young’s modulus of elasticity 𝑆𝑡𝑟𝑒𝑠𝑠 𝑌𝑜𝑢𝑛𝑔′ 𝑠 𝑚𝑜𝑑𝑢𝑙𝑢𝑠 𝑜𝑓 𝑒𝑙𝑎𝑠𝑡𝑖𝑐𝑖𝑡𝑦 = 𝑆𝑡𝑟𝑎𝑖𝑛 ✓ 22043620,93 = ✓ 3,333333333 × 10−3 = 6 613,09 𝑃𝑎 ✓ (3) [45] Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com 10 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2024) QUESTION 8: JOINING METHODS (INSPECTION OF WELD) (SPECIFIC) 8.1 Visual inspection process: • Shape of profile ✓ • Uniformity of the surface ✓ • Overlap ✓ • Undercutting ✓ • Penetration bead ✓ • Root groove ✓ (Any 3 x 1) (3) 8.2 Heat affected zone ✓ (1) 8.3 Inspection during oxy-acetylene welding: • Correct flame for the work on hand. ✓ • Correct angle of blowpipe and rod, depending on the method being used. ✓ • Depth of fusion and amount of penetration. ✓ • The rate of progress along the joint. ✓ (Any 3 x 1) (3) 8.4 Weld gauge: • Angle of preparation ✓ • Misalignment ✓ • Fillet weld leg length/excess weld metal ✓ • Fillet weld throat ✓ • Undercut ✓ (Any 3 x 1) (3) 8.5 Nick break test: • Make a hacksaw cut at both edges, through the centre of the weld. ✓ • Place specimen on two supports/bench vice. ✓ • Use a sledgehammer to break the specimen in the area of the cuts. ✓ • Inspect the exposed weld metal in the break ✓ for incomplete fusion, slag inclusion (or other welding defects). ✓ (5) 8.6 Welding defects: 8.6.1 Slag inclusion: • Included angle too narrow ✓ • Rapid chilling ✓ • Welding temperature to low / current too low ✓ • High viscosity of molten metal ✓ • Slag not removed from previous weld run ✓ • Incorrect welding technique ✓ • Surface contamination ✓ • Too big weaving action ✓ • Too slow speed along the weld joint ✓ • Too short arc length ✓ (Any 2 x 1) (2) Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com (EC/SEPTEMBER 2024) MECHANICAL TECHNOLOGY (WELDING AND METALWORK) 11 8.6.2 Incomplete penetration: • Welding current is too low ✓ • Travel speed is too fast ✓ • Incorrect electrode angle ✓ • Poor edge preparation ✓ • Insufficient root gap ✓ • Gas flow too low (gas welding) ✓ (Any 2 x 1) (2) 8.7 Disadvantages of using liquid dye penetrant: • Might miss problems below the surface. ✓ • Cannot work on porous materials. ✓ (2) 8.8 Welding defects: 8.8.1 Spatter ✓ (1) 8.8.2 Undercut ✓ (1) [23] QUESTION 9: JOINING METHODS (STRESSES AND DISTORTION) (SPECIFIC) 9.1 Distortion: • Weld distortion is the warping of the base metal ✓ caused by heat from the welding arc/flame. ✓ (2) 9.2 Quenching mediums: • Oil ✓ • Water ✓ • Brine/ salt water ✓ • Liquid salts ✓ • Molten lead ✓ (3) 9.3 Iron-carbon equilibrium diagram: A ‒ Ferrite and pearlite ✓ B ‒ Ferrite and austenite ✓ C ‒ Austenite ✓ D ‒ Cementite and austenite ✓ E ‒ Pearlite and cementite ✓ (5) 9.4 Definition of terms: 9.4.1 Elastic deformation – occurs when the joint recovers to its original ✓ position, once the stresses have been relieved. ✓ (2) 9.4.2 Shrinkage – is a form of plastic deformation ✓ where the metal has deformed as a result of contraction on cooling. ✓ (2) Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com 12 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2024) 9.5 Methods to reduce distortion: • Do not over weld ✓ • Apply intermittent welding ✓ • Place welds near the neutral axis ✓ • Use as few passes as possible ✓ • Use back-step welding ✓ • Anticipate the shrinkage forces ✓ • Plan the welding sequence ✓ • Use strong backs ✓ • Use clamps, jigs and fixtures ✓ (Any 2 x 1) (2) 9.6 Types of shrinkage: 9.6.1 Transverse shrinkage ✓ (1) 9.6.2 Longitudinal shrinkage ✓ (1) [18] QUESTION 10: MAINTENANCE (SPECIFIC) 10.1 Effects of overloading the following machines: 10.1.1 Overloading a punch and shearing machine: • Dulling or breaking blades/punches. ✓ • Putting strain on the motor and drive mechanism. ✓ (Any 1 x 1) (1) 10.1.2 Rolling machine: • Limit the lifespan of bearings, gearbox and motor. ✓ (1) 10.2 Locking out large machines before maintenance: • Due to the dangers associated with large machines. ✓ • To ensure that isolation switches are switched off. ✓ • To ensure that nobody can turn on the machine while maintenance is being done. ✓ (Any 2 x 1) (2) 10.3 Purpose of keeping service records: • Assist in the monitoring of the condition of the machines. ✓ • Assist in upholding warrantees. ✓ • Assist in keeping a history of maintenance and repairs. ✓ (2) 10.4 Lubrication is not applicable to bench grinders because the bearings on the spindle shaft are factory lubricated ✓ and sealed with an oil seal to prevent leakage. ✓ (2) [8] Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com (EC/SEPTEMBER 2024) MECHANICAL TECHNOLOGY (WELDING AND METALWORK) 13 QUESTION 11: TERMINOLOGY (DEVELOPMENT) (SPECIFIC) 11.1 Transition pieces: 11.1.1 Off-Centre hopper sketch ✓✓ (2) 11.1.2 On-Centre hopper sketch ✓✓ (2) 11.2 Conical hopper 11.2.1 Vertical height (DE): opposite tan θ = adjacent DE = tan 70  EC ✓ = 2,75  1 = 2,75 m ✓ (2) 11.2.2 Main radius (AC): adjacent cos θ = hypotenuse BC AC = ✓ COS 70° 2,5 = ✓ 0,34 = 7,35 m ✓ (3) Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com 14 MECHANICAL TECHNOLOGY (WELDING AND METALWORK) (EC/SEPTEMBER 2024) 11.2.3 Small radius (AD): adjacent cos𝜃 = hypotenuse EC DC = COS 70° ✓ 1 = 0,34 = 2,94 m ✓ Now AD = AC − DC = 7,35 − 2,94 ✓ = 4,41 m ✓ (4) 11.2.4 Circumference = π  MD =π5✓ = 15,71 m ✓ (2) 11.3 Calculating True Lengths: 11.3.1 A–1 = √1252 + 1002 + 4502 ✓ = 477,62 ✓ (2) 11.3.2 A–2 = √5002 + 1252 + 4502 ✓ = 684,2 ✓ (2) 11.3.3 B–3 = √4752 + 1002 + 4502 ✓ = 661,91 ✓ (2) [21] TOTAL: 200 Copyright reserved Please turn over Hosted by www.ecexams.co.za.
Downloaded from hlayiso.com (EC/SEPTEMBER 2024) MECHANICAL TECHNOLOGY (WELDING AND METALWORK) 15 Copyright reserved Please turn over Hosted by www.ecexams.co.za.

Study this subject

More from Grade 12 Mechanical Technology

View all