Skip to content

Mechanical Technology Grade 12 NSC June 2023 Memo (English)

MemorandumMechanical TechnologyGrade 12202321 pages

Grade 12 Mechanical Technology memorandum from the NSC June Exam 2023 (English), 21 pages. Read online or download the free PDF.

Free to read online, no sign-up needed

Loading document…

Loading document…

Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com SENIOR CERTIFICATE EXAMINATIONS/ NATIONAL SENIOR CERTIFICATE EXAMINATIONS MECHANICAL TECHNOLOGY: WELDING AND METALWORK 2023 MARKING GUIDELINES MARKS: 200 These marking guidelines consist of 21 pages. Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 2 DBE/2023 SC/NSC – Marking Guidelines QUESTION 1: MULTIPLE-CHOICE QUESTIONS (GENERIC) 1.1 C (1) 1.2 A (1) 1.3 A (1) 1.4 C (1) 1.5 B (1) 1.6 A (1) [6] Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 3 DBE/2023 SC/NSC – Marking Guidelines QUESTION 2: SAFETY (GENERIC) 2.1 Safety rule after the work procedures: Switch off the machine.  (1) 2.2 Space between the tool rest and the emery wheel:  To prevent the work piece from jamming between the wheel and tool rest.   Prevents the wheel from being damaged.   Prevents the work piece from being damaged.   Prevent injury.  (Any 2 x 1) (2) 2.3 Workshop layouts: 2.3.1 Process layout.  (1) 2.3.2 Product layout.  (1) 2.4 Hydraulic press:  Safety goggles   Safety gloves   Safety shoes   Overall  (Any 1 x 1) (1) 2.5 Safety guard on the portable angle grinder:  To protect one against sparks/metal particles.   To protect one from a breaking disc.   To protect your hand from coming into contact with the disc.  (Any 1 x 1) (1) 2.6 Shearing/Guillotine machine:  Follow the manufactures recommendations.   Keep hands away from action points.   Do not exceed the maximum material thickness.   Ensure that all guards are in place and secure.   Report defects immediately.  (Any 1 x 1) (1) Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 4 DBE/2023 SC/NSC – Marking Guidelines 2.7 Storing gas cylinders:  Upright position   Stored at 20°C / cool area   Empty cylinders stored separately from full cylinder.   Never store cylinders on top of each other.   Oxygen cylinders separate from fuel cylinders.   Secure gas cylinders.   Ensure that cylinders are properly closed.   Stored away from sparks / flammable material/ electrical switches.   Stored in a well-ventilated area.   Safety signs should be displayed.   Keep cylinders clearly labelled (Full/Empty).  (Any 2 x 1) (2) [10] Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 5 DBE/2023 SC/NSC – Marking Guidelines QUESTION 3: MATERIALS (GENERIC) 3.1 Purpose of tempering:  To relieve  strain / brittleness.   To increase  the toughness of the steel.   To refine  grain structure.  (Any 1 x 2) (2) 3.2 Heat treatment processes: 3.2.1 Case hardening:  To obtain a wear-resistant surface  and at the same time be tough enough internally at the core  to withstand the applied loads.  For a hard case over a tough core.  (Any 1 x 2) (2) 3.2.2 Annealing:  To relieve  internal stresses.   To soften  steel.   Facilitate  the machining processes.   Increase  the steel’s ductility.   Reduce  brittleness.  (Any 1 x 2) (2) 3.3 Spark test:  Hold steel against grinding wheel.   Observe the spark pattern to identify the type of steel.  (2) 3.4 Tests: 3.4.1 Filing test: File on the tip or near the edge  of the material. The bite will determine the hardness.  (2) 3.4.2 Bend test:  Metal is subjected to deformation by bending.   Observe the rupture of the metal.  (2) 3.5 Sound test on steel: 3.5.1 Low carbon steel (LCS): Dull (low pitch) sound. (1) 3.5.2 High carbon steel (HCS): Loud and clear (high pitch)  sound. (1) [14] Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 6 DBE/2023 SC/NSC – Marking Guidelines QUESTION 4: MULTIPLE-CHOICE QUESTIONS (SPECIFIC) 4.1 C (1) 4.2 B (1) 4.3 A (1) 4.4 B (1) 4.5 D (1) 4.6 D (1) 4.7 B (1) 4.8 D (1) 4.9 C (1) 4.10 A (1) 4.11 C (1) 4.12 A (1) 4.13 D (1) 4.14 B (1) [14] Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 7 DBE/2023 SC/NSC – Marking Guidelines QUESTION 5: TERMINOLOGY(TEMPLATES) (SPECIFIC) 5.1  Roof covering  is attached  to the purlins.  Purlins contribute to the rigidity  and correct spacing of the rafters/structure. (Any 1 x 2) (2) 5.2 Types of weld symbols: 5.2.1 Site weld  (1) 5.2.2 Surfacing  (1) 5.2.3 U butt weld  (1) 5.2.4 Seam weld  (1) 5.3 Strip templates are used for longer sections of angle iron.  (1) 5.4 Dimensions of the material: 5.4.1 Mean diameter: Mean Ø  Inside Ø  Thickness  180  12   192 mm  (2) 5.4.2 Mean circumference: Mean circumference  π  Mean Ø  π  192 mm   603,186 mm   Round off to 603 mm  (3) 5.5 Welding symbols:  Fillet weld both sides   8 mm in size   Length of weld bead is 50 mm   Pitch of weld is 100 mm  (4) Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 8 DBE/2023 SC/NSC – Marking Guidelines 5.6 Roof truss: A- Purlins  B- Ridging  C- Roof covering  D- Rafter  E- Internal bracing member  (5) 5.7 Lattice beams:  Tends to be very rigid.   Gives good strength to weight ratios over long spans.  (Any 1 x 2) (2) [23] Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 9 DBE/2023 SC/NSC – Marking Guidelines QUESTION 6: TOOLS AND EQUIPMENT (SPECIFIC) 6.1 Bench grinder uses:  Sharpening of tools  Shaping of metal  Remove unwanted material   Grinding prior to welding of work piece  Used in conjunction with wire brush wheel to remove rust  Used in conjunction with buffing wheel to polish work piece (Any 3 x 1) (3) 6.2 MIG: Metal inert gas (1) 6.3 Plasma cutter:  The cutter sends an electrical channel of ionized gas through the work piece being cut.  It forms a complete electric circuit via a grounding clamp.  Compressed air is blown towards the work piece through a focused nozzle at high speed.  An electric arc is formed between the gas nozzle and the work piece. (4) 6.4 Types of taps:  Taper tap / first tap  Intermediate tap / second tap  Plug tap / bottoming tap (3) 6.5 Removing slag:  Chipping hammer   Wire brush  (Any 1 x 1) (1) 6.6 Vertical rollers: Used solely for bending / rolling thick, heavy plates.  (1) 6.7 Horizontal band saw:  Ensures clean cut.  Removes shavings / cuttings.  Blade life span is prolonged.  Cools the blade.  Cools the metal. (Any 2 x 1) (2) Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 10 DBE/2023 SC/NSC – Marking Guidelines 6.8 Oxy-acetylene equipment - processes:  Gas welding   Brazing   Silver soldering   Heating / Melting   Cutting   Gouging  (Any 3 x 1) (3) [18] Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 11 DBE/2023 SC/NSC – Marking Guidelines QUESTION 7: FORCES (SPECIFIC) 7.1 Frameworks: 300 N 100 N B A F E C D 7000 100 N  300 N a  Note to marker: Marker must redraw the space and force diagram according to e d  given scales for marking purposes. Tolerance of ±2 mm  b  f MEMBER FORCE (N) NATURE AE 140 N  Strut  EF 285 N  Strut   FC 140 N  Strut  BF 100 N  Tie  c ED 100 N  Tie  (15) Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 12 DBE/2023 SC/NSC – Marking Guidelines 7.2 Beams: 7.2.1 Calculate RL: Moments about RR:    RL  10  8  8   4  5   6  2  96 RL  10 RL  9,6 kN  (4) 7.2.2 Calculate RR: Moments about RL:    RR  10  6  8   4  5   8  2 84 RR  10 RR  8,4 kN  (4) 7.2.3 Bending moment: Moment at:  B: 9,6 x 2 = 19,2 kN.m   C: (9,6 x 5) – (8 x 3) = 24 kN.m   D: (9,6 x 8) – (8 x 6) – (4 x 3) = 16,8 kN.m (6) Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 13 DBE/2023 SC/NSC – Marking Guidelines 7.2.4 Bending-moment diagram: 8 kN 4 kN 6 kN A B C D E 2m 3m 3m 2m RL RR 24   19,2 16,8   0 0 A B C D E Note to marker: Marker must redraw the bending-moment diagram according to given scales for marking purposes. (4) Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 14 DBE/2023 SC/NSC – Marking Guidelines 7.3 Stress and strain: 7.3.1 Cross sectional area m2: πD 2 A 4 π  0,03 2   4  0,71 x 10-3 m2  (2) 7.3.2 Stress MPa: Load Stress  Area 80  103   0,71 10-3   112676056,3 Pa  112,68 MPa  (3) 7.3.3 Strain: ΔL Strain  OL 0,06   3000  0,00002 OR 2  10-5  (2) 7.3.4 Young's modulus of elasticity: Stress E Strain 112,68  106  112,68  10 6   OR  2  10-5  2  10-5   5,633802815  1012 Pa  5,634  1012 Pa  5633,80  GPa   5634 GPa  (3) 7.4 Maximum stress: Load Stress  Area 55  103   0,9  10-5  6111111111 Pa   6111,11 MPa (2) [45] Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 15 DBE/2023 SC/NSC – Marking Guidelines QUESTION 8: JOINING METHODS (INSPECTION OF WELD) (SPECIFIC) 8.1 Visual inspection:  Shape of the profile   Uniformity of the surface   Overlap   Undercutting   Penetration bead   Root groove   Fusion   Reinforcement   Porosity   Spatter   Slag inclusions   (ANY WELD DEFECT THAT CAN BE SEEN VISUALLY AFTER WELDED)  (Any 2 x 1) (2) 8.2 Free bend test:  Ductility   Brittleness   Malleability   Elongation   Elasticity  (Any 1 x 1) (1) 8.3 Weld defect: Weld defect is a result which does not meet  the prescribed requirements of a welded joint.  (2) 8.4 Causes of welding defects: 8.4.1 Undercutting:  Current too high   Current too low   Wrong electrode angle   Arc length too long   Weld speed too fast   Too low arc voltage   Faulty electrode manipulation  (Any 2 x 1) (2) Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 16 DBE/2023 SC/NSC – Marking Guidelines 8.4.2 Blow hole:  Presence of contaminants / impurities on the job surface or on electrode flux   Presence of high sulphur in the job or electrode materials   Lack of shielding gas   Using wet electrode  (Any 2 x 1) (2) 8.5 Destructive tests:  Machinability test   Nick break test   Free bend test   Guided bend test  (Any 2 x 1) (2) 8.6 Procedure for conducting X-ray test:  The photographic film is sealed in an envelope (so that the light cannot expose it) and placed behind the object being tested.   The X-ray or gamma ray source is placed in front of the object being tested.   The tester should stand behind lead shields and far away from possible harmful exposure. The source is activated for a brief moment and the X-rays penetrate the test piece.   As they pass through the areas of lower density, the rays expose the defect on the film as a lighter colour on the negative,  indicating a weld defect.   Photographic films provide a permanent record of the shadow which can be carefully studied. / Shown on a monitor screen  (6) 8.7 Types of dye:  Fluorescent dye   Brightly coloured dye  (2) 8.8 Internal weld defects:  Cracks   Slag inclusion   Lack of fusion   Lack of root penetration   Blow hole   Porosity  (Any 2 x 1) (2) 8.9 Centreline cracks:  Use the correct width to depth ratio.   Decreasing the current to decrease excess penetration.   Decreasing welding/arc voltage.  (Any 2 x 1) (2) [23] Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 17 DBE/2023 SC/NSC – Marking Guidelines QUESTION 9: JOINING METHODS (STRESSES AND DISTORTION) (SPECIFIC) 9.1 Distortion and residual stress:  If the expansion that occurs when metal is heated is resisted then distortion will occur.   When contraction that occurs on cooling is resisted then a stress will be applied.   If the applied stress causes movement then distortion occurs.   If the applied stress does not cause movement then there will be residual stress in the welded joint.  (Any 2 x 1) (2) 9.2 Shrinkage: Shrinkage is a form of plastic deformation where the metal has deformed  as a result of contraction on cooling.  (2) 9.3 Grain size:  The prior amount of cold work   The temperature and time of the annealing process   The composition   The melting point  (Any 2 x 1) (2) 9.4 Cold working and hot working:  Cold working is when deformation  of steel takes place below the recrystallisation temperature (AC1)  of the steel.  Hot working is when deformation  of steel takes place above the recrystallisation temperature (AC1)  of the steel. (4) 9.5 Distortion:  Do not over weld.   Apply intermittent welding.   Place welds near the neutral axis.   Use as few passes as possible.   Use back-step welding.   Anticipate the shrinkage forces.   Plan the welding sequence.   Use strong backs.   Use clamps, jigs and fixtures.  (Any 4 x 1) (4) Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 18 DBE/2023 SC/NSC – Marking Guidelines 9.6 Types of distortion: 9.6.1 Longitudinal distortion  (1) 9.6.2 Angular distortion  (1) 9.7 Metal is cooled rapidly: Rapid cooling of metal results in large temperature differences that set up stresses,  which cause cracks on the surface.  (2) [18] Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 19 DBE/2023 SC/NSC – Marking Guidelines QUESTION 10: MAINTENANCE (SPECIFIC) 10.1 Maintenance definition: Precautionary measures, actions and processes  that are taken to keep a machine or process  in a functional order.  (3) 10.2 Pedestal drilling machine:  Visual checks of electrical wiring, switches.   Verify that all guards are secure and function correctly.   Lubricate moving parts.   Use moisture-penetrating oil spray to prevent rust.   Check for availability of specific tools.   Check the run-out of the spindle.   Inspect drive belts for wear.   Ensure the drive belt is correctly tensioned.   Check the condition of the rack and pinion mechanisms and lubricate.   Ensure cuttings are removed.   Inspect the Morse taper sleeves for burrs/scratches.   Check the chuck is correctly fitted and tight.  (Any 2 x 1) (2) 10.3 Tagging plates:  It is to isolate switches of machines before maintenance is undertaken.   To show workers that maintenance is being carried out on a specific machine.  (Any 1 x 1) (1) 10.4 Service records:  Assist in the monitoring of the condition of the machines.   Assist in upholding warranties.   Assist in keeping a history of maintenance and repairs.  (Any 2 x 1) (2) [8] Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 20 DBE/2023 SC/NSC – Marking Guidelines QUESTION 11: TERMINOLOGY (DEVELOPMENTS) (SPECIFIC) 11.1 Hopper: 11.1.1 Square  to rectangle  on centre.  (3) 11.1.2 (a) A–1: A -1= 1002 +1252 + 4502  = 228125 = 477,62 mm  (2) (b) A–2: A  2  4002  1252  4502   378125  614,92 mm  (2) (c) B–3: B  3  3752  1002  4502   353125  594,24 mm  (2) 11.2 Cone frustum: 11.2.1 A–B:  ×D  A B  12  × 800   12  209,44 mm  (3) 11.2.2 0–1: πd  0 1 12 π  600   12  157,08mm  (3) Copyright reserved Please turn over
Downloaded from hlayiso.com Mechanical Technology: Welding and Metalwork 21 DBE/2023 SC/NSC – Marking Guidelines 11.2.3 A–0: Plan length / base line: A–0 = 400 - 300  = 100 mm  True length: A  0  100 2  500 2   260 000  509,90 mm  (4) 11.3 Square to round transformer: Use to connect ducting sections  of dissimilar shapes to each other.  (2) [21] TOTAL: 200 Copyright reserved

Study this subject

More from Grade 12 Mechanical Technology

View all