Skip to content

Civil Technology Grade 12 Gauteng June 2025 QP (Afr)

Question paperCivil TechnologyGrade 12202547 pages

Grade 12 Civil Technology question paper from the Gauteng June Exam 2025 (Afrikaans), 47 pages. Read online or download the free PDF.

Free to read online, no sign-up needed

Loading document…

Loading document…

Gauteng June Exam 2025

Document textSearch extracted text and jump to a page.
JUNE EXAMINATION JUNIE EKSAMEN GRADE / GRAAD 12 2025 CIVIL TECHNOLOGY: SIVIELE TEGNOLOGIE: WOODWORKING HOUTBEWERKING TIME/TYD: 3 hours/uur MARKS/PUNTE: 200 18 pages + 4 answer sheets 18 bladsye + 4 antwoordblaaie Please turn over Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 2 GR12 0625 REQUIREMENTS: 1. Drawing instruments 2. A non-programmable calculator INSTRUCTIONS AND INFORMATION 1. This question paper consists of SIX questions. 2. Answer ALL the questions. 3. Number the answers correctly according to the numbering system used in this question paper. 4. Start the answer to EACH question on a NEW page. 5. Do NOT write in the margin of the ANSWER BOOK. 6. You may use sketches to illustrate your answers. 7. Write ALL calculations and answers in the ANSWER BOOK or on the attached ANSWER SHEETS. 8. Use the mark allocation as a guide to the length of your answers. 9. Make drawings and sketches in pencil, fully dimensioned and neatly finished off with descriptive titles and notes to conform to the SANS/SABS Code of Practice for Building Drawings. 10. For the purpose of this question paper, the size of a brick should be taken as 220 mm x 110 mm x 75 mm. 11. Use your own discretion where dimensions and/or details have been omitted. 12. Answer QUESTIONS 2; 3.5; 5.6 and 6.1 on the attached ANSWER SHEETS as prescribed in each question. 13. Drawings in the question paper are NOT according to scale due to electronic transfer. 14. Write neatly and legibly. Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 2 GR12 0625 BENODIGDHEDE: 1. Tekeninstrumente 2. ʼn Nie-programmeerbare sakrekenaar INSTRUKSIES EN INLIGTING 1. Hierdie vraestel bestaan uit SES vrae. 2. Beantwoord AL die vrae. 3. Nommer die antwoorde korrek volgens die nommeringstelsel wat in hierdie vraestel gebruik word. 4. Begin die antwoord op ELKE vraag op ʼn NUWE bladsy. 5. MOENIE in die kantlyne van die ANTWOORDBOEK skryf NIE. 6. Jy mag sketse gebruik om jou antwoorde te illustreer. 7. Skryf ALLE berekeninge en antwoorde in die ANTWOORDBOEK of op die aangehegte ANTWOORDBLAAIE. 8. Gebruik die puntetoekenning as ʼn riglyn vir die lengte van jou antwoorde. 9. Maak tekeninge en sketse in potlood, volledig gemaatskryf en netjies met beskrywende opskrifte en aantekeninge afgerond, in ooreenstemming met dieSANS/SABS se Gebruikskode vir Boutekenepraktyk. 10. Vir die doel van hierdie vraestel moet die grootte van 'n baksteen as 220 mm x 110 mm x 75 mm geneem word. 11. Gebruik jou eie oordeel waar afmetings en/of inligting ontbreek. 12. Beantwoord VRAAG 2; 3.5; 5.6 en 6.1 op die aangehegte ANTWOORDBLAAIE soos aangedui in elke vraag. 13. Tekeninge in die vraestel is NIE volgens skaal NIE as gevolg van elektroniese oordrag. 14. Skryf netjies en leesbaar. Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 3 GR12 0625 QUESTION 1: OHS, SAFETY, MATERIALS, TOOLS, EQUIPMENT AND JOINING (GENERIC) Start this question on a NEW page. 1.1 Choose a description from COLUMN B that matches an item in COLUMN A. Write only the letter (A – N) next to the question numbers (1.1.1 to 1.1.10) in the ANSWER BOOK, e.g. 1.1.11 O. COLUMN A COLUMN B 1.1.1 Conveyor belt A Process takes 38 days 1.1.2 Builder’s hoist B Has rungs 1.1.3 Ladder C Based on visual inspections and visible 1.1.4 Curing features 1.1.5 Powder coating D Expensive 1.1.6 Painting E Strength usually refers to bending 1.1.7 Galvanising strength 1.1.8 Mechanically graded F Gates must be shut when in use timber G Loose material must never be dropped 1.1.9 Visually graded timber from elevated areas 1.1.10 Linseed oil H Improves the durability of concrete by reducing cracks I Changes the surface properties of a metal J Suitable for hardwood furniture K Apply using a compressor and a spray gun L To be used by 2 or more people M To cover iron/steel with a layer of zinc to prevent it from rusting N Enhances the appearance of surfaces (10 x 1) (10) Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 3 GR12 0625 VRAAG 1: WGBV, VEILIGHEID, MATERIAAL, GEREEDSKAP EN TOERUSTING (GENERIES) Begin hierdie vraag op ʼn NUWE bladsy. 1.1 Kies ʼn beskrywing uit KOLOM B wat by ʼn item in KOLOM A pas. Skryf slegs die letter (A – N) langs die vraagnommers (1.1.1 tot 1.1.10) in die ANTWOORDBOEK neer, bv. 1.1.11 O. KOLOM A KOLOM B 1.1.1 Vevoerband A Proses vat 38 dae 1.1.2 Bouershyser B Het laaiers 1.1.3 Leer C Gebaseer op visuele inspeksies en 1.1.4 Nabehandeling visuele kenmerke 1.1.5 Poeierbestryking D Duur 1.1.6 Verf E Sterkte verwys na buigsterkte 1.1.7 Galvanisering F Hekke moet toe wees tydens gebruik 1.1.8 Meganies gegradeerde G Los materiaal moet nooit laat val word hout van hoë stellasies af nie 1.1.9 Visueel gegradeerde H Verbeter duursaamheid van beton hout deur krake te verminder 1.1.10 Lynolie I Verander die oppervlakeienskappe van in metaal J Geskik vir hardehoutmeubels K Dien toe met ʼn kompressor en 'n spuitpistool L om deur twee of meer mense gebruik te word M Om basismetaal met ʼn sinklaag te bedek om korrosie te voorkom N Verbeter die voorkoms van oppervlaktes (10 x 1) (10) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 4 GR12 0625 1.2 Various options are provided as possible answers to the following questions. Choose the answer and write only the letter (A – D) next to the question numbers (1.2.1 to 1.2.5) in the ANSWER BOOK, e.g. 1.2.6 E. 1.2.1 Electroplating is the process of … A applying a plastic coating on metal using electrolysis. B coating metal with another metal using electrolysis. C applying paint to a metal by means of magnetism. D applying liquid zinc to a metal using pressure. (1) 1.2.2 Why would you coat a metal with a layer of paint? A To resist extreme temperatures B To prevent corrosion C To prevent warping D Only A and B (1) 1.2.3 When using a scaffold, it must be inspected to ensure that … A the scaffold is not attached to the building. B the scaffold platform is supported every 4 metres. C the scaffold is free from any defects. D All the above-mentioned. (1) 1.2.4 … of scaffolds should be secured vertically. A Transoms B Diagonal braces C Standards D Base plates (1) 1.2.5 The employer must ensure that the rungs of wooden ladders are … A not painted. B free from grease. C not cracked. D All of the above-mentioned. (1) Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 4 GR12 0625 1.2 Verskeie opsies word as moonlike antwoorde op die volgende vrae gegee. Kies die antwoord en skryf slegs die letter (A – D) langs die vraagnommers (1.2.1 tot 1.2.5) in die ANTWOORDBOEK neer, bv. 1.2.6 E. 1.2.1 Elektroplatering is die proses om … A ʼn plastieklaag op metaal aan te bring deur elektrolise te gebruik. B een metaal met ʼn ander metaal te bedek deur elektrolise te gebruik. C verf op ’n metaal aan te bring deur magnetisme te gebruik. D vloeibare sink op ʼn metaal toe te pas deur druk te gebruik. (1) 1.2.2 Waarom sal jy ’n metaal met n laag verf bedek? A Om uiterste temperature te weerstaan B Om korrosie te voorkom C Om kromtrekking te voorkom D Slegs A en B (1) 1.2.3 Wanneer ʼn steier gebruik word, moet dit geȉnspekteer word om te verseker dat ... A die steier nie aan die gebou vasgemaak is nie. B die steierplatform elke 4 meter ondersteun is. C die steier vry is van enige defekte. D Al die bogenoemde. (1) 1.2.4 … van steiers moet vertikaal vasgeheg wees. A Kalfrelings B Diagonale stutte C Staanders D Basisplate (1) 1.2.5 Die werkgewer moet verseker dat die sporte van houtlere … A nie geverf is nie. B vry van ghries is. C nie gekraak is nie. D Al die bogenoemde. (1) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 5 GR12 0625 1.3 FIGURE 1.3 below shows a tool that is used in the building industry. FIGURE 1.3 1.3.1 Identify the tool shown above. (1) 1.3.2 Explain the use of the tool in FIGURE 1.3. (1) 1.4 Explain what could happen if the ends of scaffold planks exceed 230 mm beyond the last support. (1) 1.5 Explain the safety purpose of the following members of a scaffold: 1.5.1 Guardrail (1) 1.5.2 Toe-board/Kickboard (1) [20] Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 5 GR12 0625 1.3 FIGUUR 1.3 hieronder toon ʼn gereedskapstuk wat in die boubedryf gebruik word. FIGUUR 1.3 1.3.1 Identifiseer die gereedskapstuk hierbo. (1) 1.3.2 Verduidelik die gebruik van die gereedskapstuk in FIGUUR 1.3. (1) 1.4 Verduidelik wat kan gebeur indien die ente van steierplanke die laaste stut met meer as 230 mm oorskry. (1) 1,5 Verduidelik die veiligheidsdoel van die volgende lede van ʼn steier: 1.5.1 Skutreling (1) 1.5.2 Skopplaat (1) [20] Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 6 GR12 0625 QUESTION 2: GRAPHICS AS MEANS OF COMMUNICATION (GENERIC) Start this question on a NEW page. FIGURE 2 below shows drawings that appear on a building plan. Analyse the drawings and complete the table on ANSWER SHEET 2. NOTE: Contractors must verify all dimensions and levels on site before commencing work. Architects must be notified immediately of any discrepancies. ARCHITECT'S SIGNATURE ……………… CLIENT'S SIGNATURE …………….…… The following must be placed in the front of the sliding door: Access to the first floor must be by means of a: FIGURE A REVISION DATE DESCRIPTION PRINTED BY: DATE OF PRINT: NKOSI PRINTERS 2018/10/02 DRAWING TITLE: SITE PLAN STAND: 1843 BATHROOM PROJECT: LOUNGE PROPOSED DWELLING ON STAND 1843, DIEPRIVIER PROJECT NO. DRAWING NO. GR 557-102 5597P9 OFFICE DATE: DRAWN: CHECKED: 25/04/2018 JP MALOI P. BRITZ REFERENCE CODE: SCALE: QP 1- 2018 1: 100 WINDOW 2 WINDOW 3 FIGURE B FIGURE 2 [40] Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 6 GR12 0625 VRAAG 2: GRAFIKA AS KOMMUNIKASIEMIDDEL (GENERIES) Begin hierdie vraag op 'n NUWE bladsy. FIGUUR 2 hieronder toon tekeninge wat op 'n bouplan verskyn. Ontleed die tekeninge en voltooi die tabel op ANTWOORDBLAD 2. LET WEL: Kontrakteurs moet alle afmetings en vlakke op die terrein verifieer voordat hulle met werk begin. Argitekte moet onmiddellik van enige teenstrydighede in kennis gestel word. ARGITEK SE HANDTEKENING ……………… KLIËNT SE HANDTEKENING ………………… Die volgende moet voor die glydeur geplaas word: Toegang tot die eerste verdieping moet deur middel van ʼn: FIGUUR A HERSIE- DATU BESKRYWING NING M GEDRUK DEUR: DATUM VAN DRUK: NKOSI-DRUKKERS 2018/10/02 TEKENTITEL: TERREINPLAN STAANPLEK 1843 BADKAMER PROJEK: SITKAMER VOORGESTELDE WONING OP ERF 1843, DIEPRIVIER PROJEK NR. TEKENING NR. GR 557-102 5597P9 KANTOOR DATUM: GETEKEN: NAGEGAAN: 25/04/2018 JP MALOI P. BRITZ VERWYSINGSKODE: SKAAL: QP 1- 2018 1: 100 VENSTER 2 VENSTER 3 FIGUUR B FIGUUR 2 [40] Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 7 GR12 0625 QUESTION 3: QUANTITIES AND JOINING Start this question on a NEW page. 3.1 Write a description that illustrates the method of fastening a Rawl bolt into a brick wall for each of the illustrations shown in COLUMN A. Write only the question numbers (3.1.1 to 3.1.5) as indicated in COLUMN B in your ANSWER BOOK, followed by the explanation, e.g. 3.1.6 Mark the hole for the Rawl bolt. COLUMN A COLUMN B 3.1.1 3.1.2 3.1.3 3.1.4 3.1.5 (5) Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 7 GR12 0625 VRAAG 3: HOEVEELHEDE EN VERBINDING Begin hierdie vraag op ʼn NUWE bladsy. 3.1 Skryf ʼn beskrywing wat die hegging van ʼn Rawlbout in ʼn baksteen muur in KOLOM A illustreer. Skryf slegs die vraagnommers (3.1.1 tot 3.1.5) soos aangetoon in KOLOM B in jou ANTWOORDBOEK, bv. 3.1.6 Merk die gat vir die Rawlbout. KOLOM A KOLOM B 3.1.1 3.1.2 3.1.3 3.1.4 3.1.5 (5) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 8 GR12 0625 3.2 FIGURE 3.2 below shows fasteners. FIGURE 3.2 3.2.1 Identify the fasteners shown above. (1) 3.2.2 Explain the THREE steps you would follow to attach a feature utilising the above fastener to a brick wall, if the hole has been marked. (3) 3.3 FIGURES A and B below show woodworking joints. FIGURE A FIGURE B 3.3.1 Identify the woodworking joints illustrated above. (2) 3.3.2 State where each type of joint can be used. (2) Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 8 GR12 0625 3.2 Figuur 3.2 hieronder toon hegstukke. FIGUUR 3.2 3.2.1 Identifiseer die hegstukke hierbo. (1) 3.2.2 Verduidelik die DRIE stappe wat jy sal volg om ʼn voorwerp aan ʼn baksteenmuur te heg met behulp van die hegstuk, as die gat klaar gemerk is. (3) 3.3 FIGUUR A en B hieronder toon houtwerk voeë. FIGUUR A FIGUUR B 3.3.1 Identifiseer die houtwerk voeë wat hierbo geïllustreer is. (2) 3.3.2 Noem waar elke tipe voeë gebruik kan word. (2) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 9 GR12 0625 3.4 FIGURE 3.4 shows the attachment of a ceiling boqard to battens. FIGURE 3.4 3.4.1 Identify E, G and H. (3) 3.4.2 Explain the purpose of D and F. (2) Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 9 GR12 0625 3.4 FIGUUR 3.4 toon die vashegting van ’n plafonbord aan latwerk. 3.4.1 Identifiseer E, G en H. (3) 3.4.2 Veduidelik die doel van D en F. (2) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 10 GR12 0625 3.5 FIGURE 3.5 below shows the floor plan of a building with a gable roof. Study the figure and answer the questions that follow. Show ALL calculations. FIGURE 3.5 Use the following specifications:  The walls are 220 mm thick.  The length of the rafter is 3 600 mm.  The centre-to-centre spacing between purlins is 900 mm.  The overhang of the roof at the fascia board ends is 150 mm. Use ANSWER SHEET 3.5 and calculate the following: 3.5.1 The internal measurements (2) 3.5.2 The length of the wall plates (3) 3.5.3 The number of purlins needed (3) 3.5.4 The area of roof underlay needed (4) [30] Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 10 GR12 0625 3.5 FIGUUR 3.5 hieronder toon die vloerplan van ʼn gebou met ʼn geweldak. Bestudeer die figuur en beantwoord die vrae wat volg. Toon ALLE berekeninge. FIGUUR 3.5 Gebruik die volgende spesifikasies:  Die mure is 220 mm dik.  Die lengte van die dakspar is 3 600 mm.  Die hartafstand spasieëring tussen kaplatte is 900 mm.  Die oorhang van die dak by die fassieplankente is 150 mm. Gebruik ANTWOORDBLAD 3.5 en bereken die volgende: 3.5.1 Die binne-afmetings (2) 3.5.2 Die lengte van die muurplate (3) 3.5.3 Die aantal kaplatte benodig (3) 3.5.4 Die oppervlakte van dakonderlegsel benodig (4) [30] Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 11 GR12 0625 QUESTION 4: CASEMENTS, DOORS AND WALL-PANELLING Start this question on a NEW page. 4.1 Give ONE word/term for each of the following descriptions by choosing a word/term from the list below. Write only the word/term next to the question numbers (4.1.1 to 4.1.5) in the ANSWER BOOK, e.g. 4.1.6 paint. cornice; quadrant; window sill; mullion; glazing bar; front rail; mortice and tenon; tongue and groove boards; putty; skirting; glue; PVC; capping; paint; top rail; varnish 4.1.1 The moulding between the wall and the floor (1) 4.1.2 The member that separates the main parts of a double casement vertically (1) 4.1.3 Used to keep the windowpane in place (1) 4.1.4 The joint used to join the strip boards used in wall panels (1) 4.1.5 The horizontal member of the casement locatred directly below the transom (1) 4.2 Name the THREE main parts of a double casement with fanlights. (3) Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 11 GR12 0625 VRAAG 4: SWAAIRAME, DEURE EN MUURPANELE Begin hierdie vraag op ʼn NUWE bladsy. 4.1 Gee EEN woord/term vir elk van die volgende beskrywings deur ʼn woord/term uit die lys hieronder te kies. Skryf slegs die woord/term langs die vraagnommers (4.1.1 tot 4.1.5) in die ANTWOORDBOEK neer, bv. 4.1.6 vloerlys. kroonlys, kwartrondte, vensterbank, tussenstyl, ruitbalkie, voorste reling, tap-en-gat, tong-en-groefborde, stopverf, vloerlys, gom, PVC, dekstrook, verf, bo-reling, vernis 4.1.1 Die lys tussen die muur en die vloer. (1) 4.1.2 Die onderdeel wat die hoofdele van ʼn dubbelswaairaam vertikaal verdeel (1) 4.1.3 Word gebruik om die vensterruit in posisie te hou (1) 4.1.4 Die voeg wat gebruik word om die strookplanke wat by die muurpanele gebruik word te heg (1) 4.1.5 Die horisontale onderdeel van die swaairaam wat direk onder die kalfreling voorkom (1) 4.2 Noem die DRIE hoofdele van ʼn dubbelswaairaam met boligte. (3) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 12 GR12 0625 4.3 FIGURE 4.3 below shows an external elevation of an incomplete casement. The casement can be extended by placing a new part on top of the existing one. Study the figure and answer the questions that follow. FIGURE 4.3 4.3.1 Name the missing part that can be placed on top of the casement to complete it. (1) 4.3.2 Explain ONE advantage of the part that can be placed on top of the casement. (1) 4.3.3 Describe the purpose of a transom in a casement. (1) 4.3.4 Name TWO parts of a swing frame that keeps the glass in place. (2) Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 12 GR12 0625 4.3 FIGUUR 4.3 hieronder toon ʼn buite-aansig van ʼn onvoltooide swaairaam. Die swaairaam kan veleng word deur ʼn nuwe deel bo-op die bestaande swaairaam te plaas. Bestudeer die figuur en beantwoord die vrae wat volg. FIGUUR 4.3 4.3.1 Noem die ontbrekende deel wat bo-op die swaairaam geplaas kan word om dit te voltooi. (1) 4.3.2 Verduidelik EEN voordeel van die deel wat bo-op die swaairaam geplaas kan word. (1) 4.3.3 Beskryf die doel van ʼn kalfreling in ʼn swaairaam. (1) 4.3.4 Noem TWEE dele van ʼn swaairaam wat die glas in plek hou. (2) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 13 GR12 0625 4.4 FIGURE 4.4 below depicts a vertical section through the transom, bottom rail of a fanlight and top rail of a casement. FIGURE 4.4 4.4.1 Identify the members A – E. (5) 4.4.2 Describe the purpose of part B. (1) Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 13 GR12 0625 4.4 FIGUUR 4.4 hieronder toon ʼn vertikale snit deur die kalfreling, onderreling van die bolig en boreling van ʼn swaairaam. FIGUUR 4.4 4.4.1 Identifiseer dele A – E. (5) 4.4.2 Beskryf die doel van onderdeel B. (1) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 14 GR12 0625 4.5 FIGURE 4.5 below shows a vertical section through the bottom of a panelled door. Study the drawing and answer the questions that follow. FIGURE 4.5 4.5.1 Label parts A ̶ C. (3) 4.5.2 Explain ONE purpose of part C. (1) 4.5.3 State the thickness of part A. (1) 4.5.4 Identify the joint used to join part A to the stile of a door. (2) 4.5.5 Make a neat, freehand sketch of the front and top view of a raised panel. (3) Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 14 GR12 0625 4.5 Figuur 4.5 hieronder toon ʼn vertikale snit deur die onderkant van ʼn paneeldeur. Bestudeer die skets en beantwoord die vrae wat volg. FIGUUR 4.5 4.5.1 Benoem onderdele A – C. (3) 4.5.2 Verduidelik EEN doel van deel C. (1) 4.5.3 Benoem die dikte van deel A. (1) 4.5.4 Identifiseer die hegging wat gebruik is om deel A aan die styl van die deur te verbind. (2) 4.5.5 Maak ʼn netjiese vryhandskets van ʼn voor- en bo-aansig van ʼn verhewe paneel. (3) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 15 GR12 0625 4.6 FIGURE 4.6 below shows a vertical sectional view through the top of a wall panel. FIGURE 4.6 4.6.1 Identify the members labelled A ̶ D. (4) 4.6.2 Describe the purposes of members C and D, respectively. (2) 4.6.3 Explain why the length of the tongue is shorter than the depth of the groove. (2) Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 15 GR12 0625 4.6 FIGUUR 4.6 hieronder toon ʼn vertikale deursnee-aansig deur die bokant van ʼn muurpaneel. FIGUUR 4.6 4.6.1 Identifiseer die dele gemerk A ̶ D. (4) 4.6.2 Beskryf die doele van dele C en D, onderskeidelik. (2) 4.6.3 Verduidelik hoekom die lengte van die tong korter is as die diepte van die groef. (2) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 16 GR12 0625 4.7 Figure 4.7 below shows a joint used in a three-panel door. FIGURE 4.7 Predict the ratio of the thickness of part C. (1) 4.8 Describe what you understand by the term muntin in a door. (2) [40] QUESTION 5: ROOFS, CEILINGS, TOOLS, EQUIPMENT AND MATERIALS (SPECIFIC) Start this question on a NEW page. 5.1 FIGURE 5.1 below shows an electrical hand tool. Study the picture and answer the questions that follow. FIGURE 5.1 5.1.1 Identify the tool. (1) 5.1.2 Predict what could happen if no personal safety equipment is worn while using this tool. (2) 5.1.3 Briefly explain why this hand tool should be stored in a safe, dry place. (1) , Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 16 GR12 0625 4.7 FIGUUR 4.7 hieronder toon ʼn voeg wat in ʼn driepaneeldeur gebruik word. FIGUUR 4.7 Voorspel die verhouding van die in dikte van deel C. (1) 4.8 Beskryf wat jy verstaan onder die term muntin in ʼn deur. (2) [40] VRAAG 5: DAKKE, PLAFONNE, GEREEDSKAP EN MATERIAAL (SPESIFIEK) Begin hierdiedie vraag op ʼn NUWE bladsy. 5.1 FIGUUR 5.1 hieronder toon ʼn elektriese handgereedskapstuk. Bestudeer die prent en beantwooord die vrae wat volg. FIGUUR 5.1 5.1.1 Identifiseer die gereedskapstuk. (1) 5.1.2 Voorspel wat kan gebeur as geen persoonlike beskermende toerusting gedra word terwyl hierdie gereeddskap gebruik word nie. (2) 5.1.3 Verduidelik kortliks hoekom hierdie gereedskapstuk in ’n velige, droë plek gebȇre moet word. (1) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 17 GR12 0625 5.2 FIGURE 5.2 below shows a woodworking machine. Study the picture and answer the questions that follow. FIGURE 5.2 5.2.1 Identify the woodworking machine. (1) 5.2.2 Give TWO reasons why you should not adjust the height of the machine while it is operating. (2) 5.2.3 Explain TWO precautionary methods that can be taken to protect the blade of the machine. (2) 5.2.4 Explain TWO reasons why it is necessary to check the timber for loose knots and nails before using this machine. (2) 5.3 Name TWO different types of trapdoors that can be fitted to a ceiling. (2) 5.4 Differentiate between the uses of a purlin and a batten. (2) 5.5 Name the appropriate roof underlays for EACH of the following roofs: 5.5.1 Tiled roof (1) 5.5.2 Thatch roof (1) 5.5.3 IBR roof sheeting (1) Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 17 GR12 0625 5.2 FIGUUR 5.2 hieronder toon ʼn houtwerkmasjien. Bestudeer die prent en beantwoord die vrae wat volg. FIGUUR 5.2 5.2.1 Identifiseer die houtwerkmasjien. (1) 5.2.2 Gee TWEE redes waarom jy nie die hoogte van die masjien moet verstel terwyl dit werk nie. (2) 5.2.3 Verduidelik TWEE vorgsorgmaatreës wat geneem kan word om die lem van die masjien te beskerm. (2) 5.2.4 Gee TWEE redes hoekom dit nodig is om die hout vir los knope en spykers na te gaan voordat hierdie masjien gebruik word. (2) 5.3 Noem TWEE verskillende tipes valdeure wat op ʼn plafon geȉnstalleer kan word. (2) 5.4 Onderskei tussen die gebruike van ’n kaplat (daklat) en ’n plafonlat. (2) 5.5 Noem die verskillende dakonderlaag vir ELK van die volgende dakbedekkings: 5.5.1 Teëldak (1) 5.5.2 Grasdak (1) 5.5.3 IBR-dakbedekking (1) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 18 GR12 0625 5.6 Use ANSWERSHEET 5.6 and complete the vertical section through the foot of a roof truss by drawing the closed eave to scale 1 : 10. Show the following on your drawing:  Facia board: 230 mm x 38 mm  Hanger: 38 mm x 38 mm  Bearer: 38 mm x 38 mm  6 mm fibre cement board  TWO quarter round mouldings below the fibre cement board (7) 5.7 Explain the term eaves of a roof. (1) 5.8 List TWO different roof trusses used to build a roof. (2) 5.9 Differentiate between open and closed eaves (2) [30] QUESTION 6: GRAPHICS AS MEANS OF COMMUNICATION (SPECIFIC) Start this question on a NEW page. 6.1 ANSWER SHEET 6.1 shows the front view of a freestanding cupboard, with an oval hanging rail and a drawer, without a door. Project the detail of the freestanding cupboard and draw a sectional left view on cutting plane A-A. Use the following specifications:  The cupboard is made of 16 mm melamine.  The drawer bottom is made of 3 mm hardboard.  The cupboard back is made of 3 mm hardboard. (12) 6.2 Draw, in your ANSWER BOOK, a neat two-dimensional sketch of the vertical sectional view of ONE half of the CORRECT constructional detail of the conventional trap door. Label any TWO parts. (8) 6.3 Differentiate, by means of TWO line diagrams, between a king post roof truss and a SA(Howe) roof truss. Draw ONLY the trusses with overhangs in your ANSWER BOOK. (12) 6.4 Sketch in your ANSWER BOOK, in good proportion, the isometric view of ONLY the top rail with the tenon for a haunched mortice-and-tenon joint. (8) [40] TOTAL: 200 END
SIVIELE TEGNOLOGIE: HOUTBEWERKING 18 GR12 0625 5.6 Gebruik ANTWOORDBLAD 5.6 en voltooi die vertikale deursneeaansig deur die voet van ʼn dakkap deur die geslote dakrand volgens skaal 1 : 10 te teken. Toon die volgende op jou skets:  Fassieplank: 230 mm x 38 mm  Hanger: 38 mm x 38 mm  Draer: 38 mm x 38 mm  6 mm veselsementbordfibre  TWEE kwartrondlyste onder die veselsementbord (7) 5.7 Verduidelik die term dakrand van ʼn dak. (1) 5.8 Noem TWEE verskillende dakkappe wat gebruik word om ‘n dak te bou. (2) 5.9 Onderskei tussen oop en geslote dakrande. (2) [30] VRAAG 6: GRAFIKA AS KOMUNIKASIEMIDDEL (SPESIFIEK) Begin hierdie vraag op ʼn NUWE bladsy. 6.1 ANTWOORDBLAD 6.1 toon die vooraansig van ʼn vrystaande kas, met ʼn ovaal hangreling en ʼn laai, sonder ʼn deur. Projekteer die detail van die vrystaande kas en teken ʼn deursnee-linkeraansig op snyvlak A-A. Gebruik die volgende spesifikasies:  Die kas is van 16 mm melamienborde gemaak.  Die onderkant van die laai is van 3 mm hardebord gemaak.  Die agterkant van die kas is van 3 mm hardebord gemaak. (12) 6.2 Teken, in jou ANTWOORDBOEK, ʼn netjiese tweedimensionele skets van die vertikale deursnee-aansig van EEN helfte van die KORREKTE konstruksiebesonderhede van die konvensionele valdeur. Benoem enige TWEE onderdele. (8) 6.3 Onderskei, met behulp van TWEE lyndiagramme, tussen ʼn hoofstyldakkap en ʼn SA(Howe)-dakkap. Teken SLEGS die dakkappe met oorhange in jou ANTWOORDBOEK. (12) 6.4 Skets in jou ANTWOORDBOEK, in goeie verhouding, die isometriese aansig van SLEGS die bo-reling met die tap vir ʼn borstapvoeg. (8) [40] TOTAAL: 200 EINDE
CIVIL TECHNOLOGY: WOODWORKING 1 GR12 0625 NAME AND SURNAME: ANSWWER SHEET 2 NO. QUESTION ANSWER MARKS Name the drawing depicted in 2.1 1 FIGURE B. 2.2 Deduce the scale of the drawing. 1 2.3 Identify number 4. 1 2.4 Identify number 12. 1 2.5 Identify number 11. 1 2.6 Identify number 8. 1 2.7 Identify number 7. 1 2.8 Identify number 14. 1 2.9 Identify number 5. 1 Identify the number that indicates the 2.10 1 ELECTRICITY METER in FIGURE B. Recommend TWO suitable scales for 2.11 floor plans other than the one listed in 2 the notes. 2.12.1 Give the abbreviations for the following: 2.12 2.12.2 2 2.12.1 Water closet 2.12.2 Bath Name the feature that must be placed 2.13 in front of the sliding door as specified 1 in the notes. 2.14 Who checked the drawing? 1 Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 1 GR12 0625 NAAM EN VAN: ANTWOORDBLAD 2 NR. VRAE ANTWOORDE PUNTE Benoem die tekening uitgebeeld 2.1 1 in FIGUUR B. 2.2 Lei die skaal van die tekening af. 1 2.3 Identifiseer nommer 4. 1 2.4 Identifiseer nommer 12. 1 2.5 Identifiseer nommer 11. 1 2.6 Identifiseer nommer 8. 1 2.7 Identifiseer nommer 7. 1 2.8 Identifiseer nommer 14. 1 2.9 Identifiseer nommer 5. 1 Identifiseer die nommer wat die 2.10 elektisiteitsmeter in FIGUUR A 1 aantoon. Beveel TWEE geskikte skale aan 2.11 vir vloerplanne anders as dié wat 2 in die aantekeinge getoon word. 12.1 Gee die afkortings vir die volgende: 2.12 2 12.1 Spoelkloset 12.2 12.2 Stort Noem die eienskap wat voor die skuifdeur geplaas moet word 2.13 1 soos in die aantekeninge gespesifiseer. 2.14 Wie het die tekening nagegaan? 1 Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 2 GR12 0625 NAME AND SURNAME: Describe what is indicated by 2.15 1 number 3. Differentiate between the light installed 2.16 2 in the lounge and that in the office. Provide the drawing number from the 2.17 1 building plan. Who must be notified when a 2.18 contractor sets out levels on a site and 1 there are variances? Identify ONE important feature that is 2.19 1 omitted from the plan. What should be installed for balancing 2.20 and support as you go up the 1 staircase? Deduce the height of window 2 from 2.21 1 the window schedule. 2.22 Draw the symbol for a shower. 1 Draw the electrical symbol for a wall 2.23 2 mounted light. Deduce the width of window 3 from the 2.24 1 window schedule. Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 2 GR12 0625 NAAM EN VAN: 2.15 Beskryf wat deur nommer 3 1 getoon word. Verduidelik die verskil tussen die 2.16 lig wat in die sitkamer en in die 2 kombuis geȉnstalleer is. 2.17 Wat is die tekeningnommer van 1 die bouplan? Wie moet ingelig word wanneer 2.18 die kontrakteur die vlakke 1 uiteensit op ‘n bouterrein opstel en daar variansies is? Identifiseer EEN belangrike 2.19 aspek wat is op die plan 1 weggelaat is. Wat moet geïnstalleer word vir 2.20 balans en ondersteuning as jy die 1 trappe opgaan? 2.21 Lei die hoogte van venster 2 af uit 1 die venster-skedule. 2.22 Teken die simbool vir ʼn stort. 1 2.23 Teken die elektriese simbool vir ʼn 1 muur-gemonteerde lig. Lei die wydte van venster 3 uit 2.24 1 die venster-skedule af. Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 3 GR12 0625 NAME AND SURNAME: Recommend a suitable floor covering 2.25 1 for the bathroom. Explain what is meant by 1:10, as 2.26 1 indicated on the symbol in the notes. Identify the type of roof that is used 2.27 1 for the building in FIGURE A. Prove, by means of a control test, that the total vertical dimensions on the 2.28 6 left and right of the plan in FIGURE B are equal. Calculate the area of the bathroom. Show ALL calculations. Give your 2.29 3 answer in m². Round-off your answer to TWO decimal places. TOTAL: 40 Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 3 GR12 0625 NAAM EN VAN: 2.25 Beveel ʼn geskikte vloerbedekking 1 vir die badkamer aan. Verduidelik wat bedoel word met 2.26 1 1 : 10 soos aangedui op die simbool in die aantekeninge. Identifiseer die tipe dak wat vir 2.27 die gebou in FIGUUR A gebruik 1 word. Bewys, deur ʼn kontroletoets te doen, dat die totale vertikale 2.28 afmetings aan die linkerkant en 7 regterkant van die plan in FIGUUR B gelyk is. Bereken die area van die badkamer. Toon ALLE 2.29 berekeninge en gee jou antwoord 3 in m². Rond jou antwoord af na TWEE desimale plekke. TOTAAL: 40 Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 4 GR12 0625 NAME AND SURNAME: ANSWER SHEET 3.5 A B C D 3.5.1 Internal measurements: =__________________________________ =__________________________________ (2) 3.5.2 Length of wall plates needed: _____ ______ __________ (3) 3.5.3 Number of purlins needed: = ____________________________________ = ____________________________________ =__________________________________ (3) 3.5.4 Area of roof underlay needed: _____ ______ ______ __________ (4) Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 4 GR12 0625 NAAM EN VAN: ANTWOORDBLAD 3.5 A B C D 3.5.1 Binne-afmetings: =___________________________________ =___________________________________ (2) 3.5.2 Lengte van muurplate benodig: _____ ______ __________ (3) 3.5.3 Aantal kaplatte benodig: = ____________________________________ = ____________________________________ =___________________________________ (3) 3.5.4 Oppervlakte van dakonderlegsel benodig: _____ ______ ______ __________ (4) Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 5 GR12 0625 NAME AND SURNAME: ANSWER SHEET 5.6 ASSESSMENT CRITERIA MARK CANDIDATE’S MARK TOTAL: 7 Please turn over
SIVIELE TEGNOLOGIE: HOUTBEWERKING 5 GR12 0625 NAAM EN VAN: ANTWOORDBLAD 5.6 ASSESSERINGSKRITERIA PUNT KANDIDAAT SE PUNT TOTAAL: 7 Blaai om asseblief
CIVIL TECHNOLOGY: WOODWORKING 6 GR12 0625 NAME AND SURNAME: ANSWER SHEET 6.1 ASSESSMENT CANDIDATE’S MARK CRITERIA MARK 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 1 11 1 12 1 TOTAL: 12
SIVIELE TEGNOLOGIE: HOUTBEWERKING 6 GR12 0625 NAAM EN VAN: ANTWOORDBLAD 6.1 ASSESSERINGSKRITERIA PUNT KANDIDAAT SE PUNT 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 1 11 1 12 1 TOTAAL: 12

Study this subject

More from Grade 12 Civil Technology

View all