Downloaded from hlayiso.com
NATIONAL
SENIOR CERTIFICATE
GRADE 12
CIVIL TECHNOLOGY: CONSTRUCTION
NOVEMBER 2018
MARKS: 200
TIME: 3 hours
This question paper consists of 15 pages and 9 answer sheets.
Copyright reserved Please turn over
Skip to contentAll 2018 papers %20Afr_hlayiso.com_--be54c81a-cc52-4da7-a74c-ec3f0bddf626/v1-ba62d57d54f2abc10142/card.webp)
%20Afr_hlayiso.com_--8a4b5aba-d78e-4505-aae9-e127ef45df85/v1-c293df39bff70a3d967c/card.webp)
%20Memo%20FINAL%20Eng_hlayiso.com_--2cdca6a9-a7a6-411c-9a30-4575c8e6a5cf/v1-2e55aea2b9c3d442037f/card.webp)
%20FINAL%20Memo%20Eng_hlayiso.com_--f4e1d2a3-db17-47d5-8ae8-6332d121a6d3/v1-87156080ef4999b64098/card.webp)
%20FINAL%20Memo%20Eng_hlayiso.com_--90041771-68e0-4915-bc37-7a4f246b369f/v1-168ac77af6e035b2eae3/card.webp)

View all%20(Afrikaans)%20June%202025%20Possible%20Answers--c0a65d19-28ca-4ac3-8c61-d4627d2a3133/v1-5f42c573694769cf80ce/card.webp)
%20MG%20Eng--0e265899-dc44-4809-aabf-8f374f1af392/v1-73a07814cfc9334618a1/card.webp)




Civil Technology Grade 12 NSC November 2018 QP (Eng)
Grade 12 Civil Technology question paper from the NSC November Exam 2018 (English), 24 pages. Read online or download the free PDF.
Civil Technology · Grade 12 · NSC November Exam · 2018. Question paper, 24 pages. Read online or download the PDF.
- Subject
- Civil Technology
- Grade
- Grade 12
- Document type
- Question paper
- Year
- 2018
- Exam period
- NSC November Exam
- Curriculum
- CAPS
- Pages
- 24
- File size
- 589.4 KB
Free to read online, no sign-up needed
Loading document…
Loading document…
1 of 24
This exam
Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com
Civil Technology: Construction 2 DBE/November 2018
NSC
REQUIREMENTS:
1. Drawing instruments
2. A non-programmable calculator
3. ANSWER BOOK
INSTRUCTIONS AND INFORMATION
1. This question paper consists of SIX questions.
2. Answer ALL the questions.
3. Answer each question as a whole. Do NOT separate subsections of
questions.
4. Start the answer to EACH question on a NEW page.
5. Do NOT write in the margins of the ANSWER BOOK.
6. You may use sketches to illustrate your answers.
7. Write ALL calculations and answers in the ANSWER BOOK or on the
attached ANSWER SHEETS.
8. Use the mark allocation as a guide to the length of your answers.
9. Make drawings and sketches in pencil, fully dimensioned and neatly finished
off with descriptive titles and notes to conform to the SANS/SABS Code of
Practice for Building Drawings.
10. For the purpose of this question paper, the size of a brick should be taken as
220 mm x 110 mm x 75 mm.
11. Use your own discretion where dimensions and/or details have been omitted.
12. Answer QUESTIONS 2, 3.7, 4.3, 5.2, 5.4, 6.2 and 6.6 on the attached
ANSWER SHEETS using drawing instruments, where necessary.
13. Write your CENTRE NUMBER and EXAMINATION NUMBER on every
ANSWER SHEET and hand them in with your ANSWER BOOK, whether you
have used them or not.
14. Drawings in the question paper are NOT to scale due to electronic transfer.
15. Google Images was used as the source for all photographs and pictures.
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 3 DBE/November 2018
NSC
QUESTION 1: OHSA, MATERIALS, TOOLS, EQUIPMENT AND JOINING
(GENERIC)
Start this question on a NEW page.
1.1 Choose a description from COLUMN B that matches an item in COLUMN A.
Write only the letter (A–G) next to the question numbers (1.1.1 to 1.1.5) in the
ANSWER BOOK, e.g. 1.1.6 H.
COLUMN A COLUMN B
1.1.1 Sole plate A not to be used in the proximity of
electrical wires
1.1.2 Aluminium ladder
B to cover iron or steel with a layer of
1.1.3 Scaffold zinc to prevent it from rusting
1.1.4 Safety net C prevents splashing of chemicals
1.1.5 Galvanising D protect metal, wood and other
materials against corrosion and
decay
E prevents falling objects from injuring
workers
F prevents vertical standards from
sinking into the ground
G should be provided with toe boards
to prevent objects from falling off
(5 x 1) (5)
1.2 Describe TWO safety precautions that must be adhered to when working on a
scaffold. (2)
1.3 What is the purpose of the guard rail of a scaffold in terms of safety? (2)
1.4 Explain the purpose of painting. (2)
1.5 Describe ONE advantage of the curing process of concrete. (1)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 4 DBE/November 2018
NSC
1.6 FIGURE 1.6 below shows a tool that is used in the building construction
industry.
A
FIGURE 1.6
1.6.1 Identify tool A. (1)
1.6.2 Explain TWO uses of tool A. (2)
1.6.3 Explain why the batteries should be removed from the tool if the
tool is not going to be used for a long time. (1)
1.7 FIGURE 1.7 below shows joining fixtures that are used on building sites and
in workshops.
A B
FIGURE 1.7
1.7.1 Identify fastener A and fastener B. (2)
1.7.2 Explain ONE use of fastener A and fastener B respectively. (2)
[20]
QUESTION 2: GRAPHICS AS METHOD OF COMMUNICATION (GENERIC)
FIGURE 2 on the next page shows different drawings that appear on a building plan.
Analyse the drawings and complete the table on ANSWER SHEET 2.
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 5 DBE/November 2018
NSC
1 NOTES:
Contractors must verify all
dimensions and levels on site before
commencing work. Architects to be
notified immediately of any
2 discrepancies.
7 ARCHITECT'S SIGNATURE ………………….
CLIENT'S SIGNATURE ……………….…….
3
The following must be placed in
W1 W2 front of the sliding door:
4
1 : 10
8
5
W3 Access to the first floor must be by
FFL 6 means of a:
FIGURE A
REVISION DATE DESCRIPTION
PRINTED BY: DATE OF PRINT:
220 3 000 110
220 220
NKOSI PRINTERS 2018/10/02
DRAWING TITLE:
SITE PLAN STAND 1843
9 PROJECT:
PROPOSED DWELLING ON STAND 1843,
2 000 2 000
DIEPRIVIER
W4 10 BATHROOM
11 PROJECT NO. DRAWING NO.
12 LOUNGE GR 557-102 557P9
13 W 14 DATE DRAWN CHECKED SCALE
15
110 W3 25/4/2018 JP MALOI P BRITZ 1 : 100
W3
4 000 REFERENCE CODE
QP 1 - 2018
OFFICE
19 WINDOW 2 WINDOW 3
16
900 2 000
17 18 W2
220 1 200 1 200
110 2 800 220
FIGURE B
19
FIGURE 2 [40]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 6 DBE/November 2018
NSC
QUESTION 3: ROOFS, STAIRCASES AND JOINING (SPECIFIC)
Start this question on a NEW page.
3.1 What is the minimum pitch of a roof when class A corrugated iron sheeting
are used to cover a roof? (1)
3.2 State the maximum distance for the spacing between roof trusses for
corrugated iron roof sheeting. (1)
3.3 Differentiate between the timber used to fix a roof tile and roof sheeting by
means of neat freehand drawings of EACH in your ANSWER BOOK. Print the
correct name under each drawing. (2)
3.4 What are the measurements of a purlin for corrugated iron roof sheeting? (1)
3.5 Differentiate between the spacing of roof trusses for clay tiles and roof trusses
for fibre-cement tiles. Copy the table below in your ANSWER BOOK.
CLAY ROOF TILES FIBRE-CEMENT TILES
(2)
3.6 FIGURE 3.6 below shows a vertical cross section of a part of the construction
at the ridge of a roof truss. Identify parts A–D.
A
B
C
D
FIGURE 3.6 (4)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 7 DBE/November 2018
NSC
3.7 Use ANSWER SHEET 3.7 and draw, in good proportion, a neat sketch of a
collar tie roof truss with a pitch of 45° resting on two supporting walls.
Show the following on your drawing:
Walls
Wall plates
Rafters
Collar beam/Collar tie
Ridge beam (8)
3.8 Give ONE word/term for EACH of the following descriptions by choosing
a word/term from the list below. Write only the word/term next to the question
numbers (3.8.1 to 3.8.5) in the ANSWER BOOK, e.g. 3.8.6 Riser.
run; landing; nosing; going/tread; apron; riser;
pitch line; baluster; handrail; stairwell
3.8.1 The vertical distance between two consecutive treads (1)
3.8.2 Vertical posts that hold up the handrail (1)
3.8.3 The flat, horizontal surface of a step on which one walks when
descending or ascending a stair case (1)
3.8.4 The top horizontal area on top of a staircase (1)
3 8.5 The horizontal distance covered by the stairs (1)
3.9 Draw a neat sketch, in good proportion, of a square and round profile that can
be used for handrails in your ANSWER BOOK. (2)
3.10 Explain ONE method of mounting handrails onto a wall. (1)
3.11 Describe TWO methods of securing a wall plate to a brick wall. (2)
3.12 Steel sections can be joined to a concrete base by means of a base plate and
steel pin connection. Explain the purpose of the pin in this joining method. (1)
[30]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 8 DBE/November 2018
NSC
QUESTION 4: EXCAVATIONS, FORMWORK, TOOLS AND EQUIPMENT AND
MATERIALS (SPECIFIC)
Start this question on a NEW page.
4.1 Choose a description from COLUMN B that matches an item in COLUMN A.
Write only the letter (A–G) next to the question numbers (4.1.1 to 4.1.5) in the
ANSWER BOOK, e.g. 4.1.6 H.
COLUMN A COLUMN B
4.1.1 Excavations A used to fasten the various
sections of formwork
4.1.2 Formwork
B installing ceilings and floor tiles
4.1.3 Sole plate
C remove earth to allow the
4.1.4 Plywood construction of a foundation or
basement
4.1.5 Threaded rods and nuts
D mould into which fresh concrete
is poured
E consists of thin layers of wood
with grains crossing in different
directions
F shuttering props rest on this
G used in flying shores
(5 x 1) (5)
4.2 Excavation of loose soil is necessary on a building site to reach a firmer soil
base.
4.2.1 Explain THREE safety factors that should be considered after
excavations have been completed. (3)
4.2.2 Describe THREE tasks that must be performed after the site
inspection in order to prepare the site. (3)
4.3 FIGURE 4.3 on ANSWER SHEET 4.3 shows a trench that has been
excavated.
Use ANSWER SHEET 4.3 and draw a neat sectional drawing, in good
proportion, of the shuttering for firm soil.
Show the following on your drawing:
Folding wedges
Walling boards
Poling boards
Struts
Any TWO labels (8)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 9 DBE/November 2018
NSC
4.4 Describe ONE property of good formwork. (1)
4.5 FIGURE 4.5 below shows formwork in the construction process. Study the
drawing and answer the questions that follow.
A
B
C
D
E
FIGURE 4.5
4.5.1 Identify the type of formwork in FIGURE 4.5. (1)
4.5.2 Name A to D. (4)
4.5.3 Justify the use of E. (1)
4.6 State TWO properties of steel shuttering. (2)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 10 DBE/November 2018
NSC
4.7 FIGURE 4.7 below shows a construction machine that is used on a building
site.
Study FIGURE 4.7 and answer the questions that follow.
FIGURE 4.7
4.7.1 Describe TWO safety precautions that must be adhered to when
using the machine in FIGURE 4.7. (2)
4.7.2 Explain, in your own words, how you will take care of this
construction machine. (2)
4.8 FIGURE 4.8 below shows a machine that is used on a building site. State
TWO ways in which you will take care of this machine.
FIGURE 4.8 (2)
4.9 Describe TWO disadvantages of ready-mixed concrete. (2)
4.10 Explain TWO purposes of the slump test. (2)
4.11 Name TWO different types of methods that can be used for the curing of
concrete. (2)
[40]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 11 DBE/November 2018
NSC
QUESTION 5: PLASTER AND SCREED, BRICKWORK AND GRAPHICS AS
MEANS OF COMMUNICATION (SPECIFIC)
Start this question on a NEW page.
5.1 FIGURE 5.1 below shows a worker plastering a wall. Study the drawing and
answer the questions that follow.
A B C D
FIGURE 5.1
5.1.1 Describe the processes that take place from A to D. (4)
5.1.2 What type of tool is used in C? (1)
5.2 ANSWER SHEET 5.2 shows the outlines of the front and side views of a
cavity wall. Use ANSWER SHEET 5.2 as a guide and draw FOUR courses of
the external view of the cavity wall showing the front and left views. (6)
5.3 FIGURE 5.3 below shows TWO different paving patterns. Study the
photographs and answer the questions that follow.
A B
FIGURE 5.3
5.3.1 Name paving patterns A and B. (2)
5.3.2 State ONE paving method that is commonly used. (1)
5.3.3 Describe the term jointing when laying paving bricks. (1)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 12 DBE/November 2018
NSC
5.4 Use ANSWER SHEET 5.4 and draw to a scale of 1 : 10 a detailed vertical
section through the foot of a roof truss showing open eaves. Show the
following on your drawing:
Wall: 220 mm wide, face brick
Wall plate: 114 mm x 38 mm
Tie beam: 114 mm x 38 mm
Rafter: 114 mm x 38 mm
Eaves overhang: 400 mm
Purlins: 76 mm x 50 mm
Corrugated iron roof covering
Fascia board: 230 mm x 38 mm
Print the scale below the drawing.
Print any TWO labels on the drawing. (15)
[30]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 13 DBE/November 2018
NSC
QUESTION 6: REINFORCEMENT IN CONCRETE, FOUNDATIONS, CONCRETE
FLOORS AND QUANTITIES (SPECIFIC)
Start this question on a NEW page.
6.1 Various options are given as possible answers to the following questions.
Choose the answer and write only the letter (A–D) next to the question
numbers (6.1.1 to 6.1.5) in the ANSWER BOOK, e.g. 6.1.6 C.
6.1.1 Reinforcement is indicated on a construction drawing according to
a code. In the code 9 R 16 01 200, the 200 indicates the …
A diameter of the bar.
B centre-to-centre spacing.
C number of bars in the group.
D bar number. (1)
6.1.2 Which of the following is a force that can act on a structure?
A Tensile force
B Compression force
C Shear force
D All the above-mentioned (1)
6.1.3 During the planning of a rib and block floor, the following need to
be considered:
A Straightness of units
B Water absorbing properties of units
C Nature of props
D Cross bracing for sturdiness (1)
6.1.4 Steel tube caisson piles make use of a …
A wet concrete plug.
B casing driven into the ground.
C steel tip.
D precast concrete pile. (1)
6.1.5 Type of soil where precast piling can be used:
A Soft soil
B Firm soil
C Stable soil
D All the above-mentioned (1)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 14 DBE/November 2018
NSC
6.2 Use ANSWER SHEET 6.2 and draw a neat sectional view of a square
reinforced concrete column in good proportion.
Show the following on your drawing:
Column
8 main bars
Stirrups/Binders
Minimum concrete cover
TWO labels (10)
6.3 State THREE advantages of using pile foundations. (3)
6.4 Explain the method of installing in situ driven piles. (3)
6.5 FIGURE 6.5 below shows material for a floor component. Study the diagram
and answer the questions that follow.
A
B
FIGURE 6.5
6.5.1 Identify the part in FIGURE 6.5. (1)
6.5.2 What is the purpose of the hole at A? (1)
6.5.3 Name the part that will fit in at B. (1)
6.5.4 Name THREE materials that are used for this type of floor
construction. (3)
6.5.5 State ONE important safety factor that should be adhered to after
the installation of this type of floor construction. (1)
6.5.6 Explain TWO disadvantages of this type of floor construction. (2)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction 15 DBE/November 2018
NSC
6.6 FIGURE 6.6 below shows the floor plan of a storeroom with an opening for a
door and a window.
5 000
8 000
FIGURE 6.6
SPECIFICATIONS:
Outside measurements of the storeroom: 8 000 mm x 5 000 mm
The superstructure is a one-brick wall: 220 mm wide and 2 700 mm high
Size of the opening for the window: 1 200 mm x 900 mm
Size of the opening for the door: 2 100 mm x 900 mm
Use ANSWER SHEET 6.6 and calculate the following:
Total length of the skirting for the store room (ignore the reveals) (6)
Volume of screed for the floor if the screed is 25 mm thick (4)
Round off your answers to TWO decimal places.
[40]
TOTAL: 200
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction DBE/November 2018
NSC
EXAMINATION NUMBER:
CENTRE NUMBER:
ANSWER SHEET 2
NO. QUESTIONS ANSWERS MARKS
1 Identify FIGURE A. 1
2 Identify FIGURE B. 1
3 Identify number 4. 1
4 Identify number 5. 1
5 Identify number 9. 1
6 Identify number 10. 1
7 Identify number 11. 1
8 On what date was the plan printed? 1
9 Who drew the building plan? 1
Name the feature in the column for the
10 notes in FIGURE 2 that must be 1
installed in front of the sliding door.
Name the feature in the column for the
11 notes in FIGURE 2 that must give 1
access to the first floor.
Identify the type of roof that is used for
12 1
the building in FIGURE A.
13 Explain the purpose of number 1. 1
14 Explain the purpose of number 2. 1
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction DBE/November 2018
NSC
Explain the abbreviation FFL at
15 1
number 6.
16 Explain the purpose of number 7. 1
Explain the meaning of the arrow on
17 the feature that must be installed in 1
front of the sliding door.
Explain what is meant by 1 : 10
18 1
indicated on the symbol in the notes.
19 Which room will feature 15 serve? 1
Explain the short dashed lines on the
20 1
windows.
Deduce the height of window 2 from
21 1
the window schedule.
Deduce the width of window 3 from
22 1
the window schedule.
On what elevation of the building is
23 1
the bathroom window situated?
Differentiate between component
24 2
number 3 and component number 8.
Differentiate between the light in the
25 2
lounge and the light in the bathroom.
Recommend a suitable floor covering
26 1
for the bathroom.
Recommend an appropriate scale to
27 which FIGURE A should be drawn, 1
according to SANS.
Recommend an alternative sanitary
28 fitment to replace number 11 that will 1
serve a similar purpose.
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction DBE/November 2018
NSC
Calculate the internal area of the office
29 3
in m². Show ALL calculations.
Calculate the perimeter of the building.
30 7
Show ALL calculations.
TOTAL 40
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction DBE/November 2018
NSC
CENTRE NUMBER:
EXAMINATION NUMBER:
ANSWER SHEET 3.7
ASSESSMENT CRITERIA MARK CANDIDATE'S
MARK
Walls 2
Wall plates 2
Rafters 2
Collar beam/Collar tie 1
Ridge beam correctly drawn 1
TOTAL: 8
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Construction DBE/November 2018
NSC
CENTRE NUMBER:
EXAMINATION NUMBER:
ANSWER SHEET 4.3
FIGURE 4.3
ASSESSMENT CRITERIA MARK CANDIDATE'S
MARK
Folding wedges 1
Walling boards 1
Poling boards 2
Struts 1
Shuttering correctly drawn 1
Any TWO labels 2
TOTAL: 8
Copyright reserved
Downloaded from hlayiso.com
Civil Technology: Construction DBE/November 2018
NSC
CENTRE NUMBER:
EXAMINATION NUMBER:
ANSWER SHEET 5.2
ASSESSMENT CRITERIA MARK CANDIDATE'S
MARK
Full bricks and ½ brick every alternate course
4
on front view
Left view full brick every course 1
Left view ¼ brick every course 1
TOTAL: 6
Copyright reserved
Downloaded from hlayiso.com
Civil Technology: Construction DBE/November 2018
NSC
CENTRE NUMBER:
EXAMINATION NUMBER:
ANSWER SHEET 5.4
ASSESSMENT CRITERIA MARK CANDIDATE'S
MARK
Wall: 220 mm wide, face brick 1
Beam filling 1
Wall plate: 114 mm x 38 mm 1
Tie beam: 114 mm x 38 mm 1
Rafter: 114 mm x 38 mm 1
Purlins: 76 mm x 50 mm 2
Corrugated iron roof covering 1
Fascia board: 230 mm x 38 mm 1
Any TWO labels 2
Print the scale below the drawing 1
Application of scale:
One or two incorrect =3
Three or four incorrect =2 3
More than five incorrect =1
No measurement correct = 0
TOTAL: 15
Copyright reserved
Downloaded from hlayiso.com
Civil Technology: Construction DBE/November 2018
NSC
CENTRE NUMBER:
EXAMINATION NUMBER:
ANSWER SHEET 6.2
ASSESSMENT CRITERIA MARK CANDIDATE'S
MARK
Column 500 mm x 500 mm 2
8 main bars 2
Binders/Stirrups 2
Minimum concrete cover 1
Any TWO labels 2
Proportion 1
TOTAL: 10
Copyright reserved
Downloaded from hlayiso.com
Civil Technology: Construction DBE/November 2018
NSC
CENTRE NUMBER:
EXAMINATION NUMBER:
ANSWER SHEET 6.6
A B C D
Skirting: Inside length of building
- __________
= (2)
Skirting: Inside width of the building
– __________
= _________ (2)
Total length = ________ + _________x 2
= __________
= - __________
= __________ metres of skirting needed
(2)
Screed: Inside area of building:
1/
_______
_______
_______ ______ m³ = _________ (4)
Copyright reserved
Study this subject
Recommended for this subject
%20Afr_hlayiso.com_--be54c81a-cc52-4da7-a74c-ec3f0bddf626/v1-ba62d57d54f2abc10142/card.webp)
Question paper
Civil Technology Grade 12 NSC November 2018 QP (Afr)
%20Afr_hlayiso.com_--8a4b5aba-d78e-4505-aae9-e127ef45df85/v1-c293df39bff70a3d967c/card.webp)
Question paper
Civil Technology Grade 12 NSC November 2018 QP (Afr)
%20Memo%20FINAL%20Eng_hlayiso.com_--2cdca6a9-a7a6-411c-9a30-4575c8e6a5cf/v1-2e55aea2b9c3d442037f/card.webp)
Memorandum
Civil Technology Grade 12 NSC November 2018 Memo (English)
%20FINAL%20Memo%20Eng_hlayiso.com_--f4e1d2a3-db17-47d5-8ae8-6332d121a6d3/v1-87156080ef4999b64098/card.webp)
Memorandum
Civil Technology Grade 12 NSC November 2018 Memo (English)
%20FINAL%20Memo%20Eng_hlayiso.com_--90041771-68e0-4915-bc37-7a4f246b369f/v1-168ac77af6e035b2eae3/card.webp)
Memorandum
Civil Technology Grade 12 NSC November 2018 Memo (English)

Question paper
Civil Technology Grade 12 Eastern Cape Mock 2018 QP (Afr)
More from Grade 12 Civil Technology
%20(Afrikaans)%20June%202025%20Possible%20Answers--c0a65d19-28ca-4ac3-8c61-d4627d2a3133/v1-5f42c573694769cf80ce/card.webp)
Memorandum
Civil Technology Grade 12 Gauteng June 2025 Memo (Afrikaans)
%20MG%20Eng--0e265899-dc44-4809-aabf-8f374f1af392/v1-73a07814cfc9334618a1/card.webp)
Memorandum
Civil Technology Grade 12 NSC November 2025 Memo (English)

Memorandum
Civil Technology Grade 12 Eastern Cape Prelim 2024 Memo

Memorandum
Civil Technology Grade 12 Eastern Cape Prelim 2024 Memo

Memorandum
Civil Technology Grade 12 Eastern Cape Prelim 2024 Memo

Memorandum