Downloaded from hlayiso.com
basic education
¥ } Department:
‘ Cp) | Basic Education |
LS REPUBLIC OF SOUTH AFRICA
NATIONAL
SENIOR CERTIFICATE |
CIVIL TECHNOLOGY: WOODWORKING f
a 7
: NOVEMBER 2021 a
Malal= Sia.s Sale Sle & Siw piace mime slate alalereteleretelecista'clals minie pris slalsiee
MARKS: 200
TIME: 3 hours
This question paper consists of 15 pages and 8 answer sheets.
Copyright reserved Please turn over
Skip to contentAll 2021 papers %20Eng_hlayiso.com_--dcb7f976-b3d6-42a9-b2b1-44ae9b2d8e3f/v1-323df2bd04b35e089240/card.webp)
%20Eng_hlayiso.com_--f39d7571-db9f-4ded-b5e7-27008235ca8b/v1-4efe03b2e24afe8e530e/card.webp)


%20Eng_hlayiso.com_--8f870317-4f98-4448-b660-0d528b30c2a4/v1-c304a8b770601b9842d8/card.webp)
%20Afr_hlayiso.com_--ff7a7835-2450-4747-baaf-85c46ef7d411/v1-8ec16443e4393e6a6260/card.webp)
View all%20(Afrikaans)%20June%202025%20Possible%20Answers--c0a65d19-28ca-4ac3-8c61-d4627d2a3133/v1-5f42c573694769cf80ce/card.webp)
%20MG%20Eng--0e265899-dc44-4809-aabf-8f374f1af392/v1-73a07814cfc9334618a1/card.webp)




Civil Technology Grade 12 NSC November 2021 QP (Eng)
Grade 12 Civil Technology question paper from the NSC November Exam 2021 (English), 24 pages. Read online or download the free PDF.
Civil Technology · Grade 12 · NSC November Exam · 2021. Question paper, 24 pages. Read online or download the PDF.
- Subject
- Civil Technology
- Grade
- Grade 12
- Document type
- Question paper
- Year
- 2021
- Exam period
- NSC November Exam
- Curriculum
- CAPS
- Pages
- 24
- File size
- 952.8 KB
Free to read online, no sign-up needed
Loading document…
Loading document…
1 of 24
This exam
Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com
Civil Technology: Woodworking 2 DBE/November 2021
NSC
REQUIREMENTS:
1. Drawing instruments
2. A non-programmable calculator
3. ANSWER BOOK
INSTRUCTIONS AND INFORMATION
1. This question paper consists of SIX questions.
2 Answer ALL the questions.
3. Read all questions carefully.
4
Answer each question as a whole. Do NOT separate subsections of
questions.
a
Number the answers correctly according to the numbering system used in this
question paper.
Start the answer to EACH question on a NEW page.
Do NOT write in the margins of the ANSWER BOOK.
You may use sketches to illustrate your answers.
0 @ N
Write ALL calculations and answers in the ANSWER BOOK or on the
attached ANSWER SHEETS.
10. Use the mark allocation as a guide to the length of your answers.
41. Make drawings and sketches in pencil, fully dimensioned and neatly finished
off with descriptive titles and notes to conform to the SANS/SABS Code of
Practice for Building Drawings.
12. For the purpose of this question paper, the size of a brick should be taken as
220 mm x 110 mm x 75 mm.
13. Use your own discretion where dimensions and/or details have been omitted.
14. Answer QUESTIONS 2, 3.2.1, 3.2.2, 3.3, 5.4, 6.2.2, 6.5 and 6.6 on the
attached ANSWER SHEETS using drawing instruments, where necessary.
15. Write your CENTRE NUMBER and EXAMINATION NUMBER on every
ANSWER SHEET and hand them in with your ANSWER BOOK, whether you
have used them or not.
16. Drawings in the question paper are NOT to scale due to electronic transfer.
17. Google Images was used as the source of all photographs and pictures.
18. Write neatly and legibly.
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Woodworking 3 DBE/November 2021
NSC
QUESTION 1: OHSA, SAFETY, MATERIALS, TOOLS, EQUIPMENT AND JOINING
(GENERIC)
Start this question on a NEW page.
1.1 Give ONE word/term for each of the following descriptions by choosing a
word/term from the list below. Write down only the word/term next to the
question numbers (1.1.1. to 1.1.5) in the ANSWER BOOK, eg. 1.1.6
casement.
damp seal; powder coating; galvanising; sanding; paint;
electroplating; curing; _ plastering; _ silicone
1.1.1 To cover steel or iron with a layer of zinc (1)
1.1.2 Available in a water and oil base (1)
1.1.3 Improves mechanical and engineering properties of metals (1)
1.1.4 Process of keeping fresh concrete moist (1)
1.1.5 Applying as a finish to materials to resist extreme temperatures (1)
1.2 FIGURE 1.2 below shows scaffolding that is used on a construction site to
reach the upper parts of a building.
FIGURE 1.2 _
1.2.1 Describe TWO aspects the scaffolding must adhere to before it is
used. (2)
1.2.2 Name the omitted part in FIGURE 1.2 that should be fixed to the
platform of the scaffold to prevent tools from falling off. (1)
1.2.3 Explain TWO safety precautions that have to be adhered to when
working on scaffolding. (2)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Woodworking
1.3
1.4
1.5
1.6
1.7
4
NSC
DBE/November 2021
State TWO methods that can be used to remove waste material safely from
high places.
Describe TWO regulations regarding the safe use of trestle scaffolds.
Describe ONE precautionary measure you would apply when hoisting
material and equipment in a builder's hoist.
Explain in THREE chronological steps how you will join TWO solid 4mm
metal plates with a bolt and nut after the positions of the holes have been
marked on the plates.
Complete in your ANSWER BOOK the information in the table below by
indicating ONE use and ONE way to care for the tool.
NAME OF TOOL
USE
WAY TO CARE
Multi-detector
To locate ...
Protect the multi-detector
against...
QUESTION 2: GRAPHICS AS MEANS OF COMMUNICATION (GENERIC)
FIGURE A and B on the next page shows drawings that appear on a building plan.
Analyse the drawings and complete the table on ANSWER SHEET 2.
Copyright reserved
Please turn over
(2)
(2)
(1)
(3)
(2)
[20]
Downloaded from hlayiso.com
Civil Technology: Woodworking 5 DBE/November 2021
NSC
PLOT 33 NOTES:
24 600 , Contractors must verify all
dimensions and levels on site before
= @ commencing work. Architects must
45.000 2000 3.000, 5.000 be notified immediately of any
| | discrepancies.
! |
_ _ _ _ _ Wall thickness: External = 220 mm
8 | @) & Internal = 110 mm
Ww
= i fe
* wn
| Ww + 3 w
| | tw] ' 1S) ii Architect's signature .....
g NEW = .
a 3 Fs | | DWELLING Client's signature ................:0cec cee
9 a be nT | ——————
. |
3 ~ —+—®
i I
a | | Palisade fencing must be erected on
N g 5
a | | - () the boundary of the new dwelling.
| PLOT 31 }_I™
° : Ww
s | I
a - - - -
i S ]
8
| Jo zit
1000 WIDE
3 —eage— pe
EAGLE STREET
FIGURE A PLOT 35 Ny o-o
220. 140. 110
4000 4.450
oO
4
1 REVISION 1| DATE DESCRIPTION
i 20/06/2021 | CONTOUR LINES
DINNG RO PRINTED BY: DATE OF PRINT:
Qo t :
lhe 8 GEMINI PRINTERS | 01/06/2021
[el oO
a) DRAWING TITLE:
1: 10) SITE AND FLOOR PLAN PLOT 31
l LIVING ROOM A PROJECT:
7 10) PROPOSED DWELLING ON PLOT 31,
E ° 8 HEROLDS BAY
aTHROOM = ° PROJECT NO. DRAWING NO.
GR 228-510 339P7
=<] Tor DATE DRAWN CHECKED
= 18/05/2021| JP BLOM GBOK
3 SITE PLAN SCALE: 1 : 200
|| BEDROOM 1 BEDROOM 2 *
\ FLOOR PLAN SCALE 1: 100
o
3k
3 REFERENCE CODE
FIGURE B | QP 2- 2021
ROOMA i
So
a [40]
Copyright reserved
Please turn over
Downloaded from hlayiso.com
Civil Technology: Woodworking 6 DBE/November 2021
NSC
QUESTION 3: CUPBOARDS, CASEMENTS, WALL-PANELLING AND QUANTITIES
(SPECIFIC)
Start this question on a NEW page.
3.1 FIGURE 3.1 below shows the vertical sectional view through a part of
a casement with a fanlight. Study the sketch and answer the questions that
follow.
N\, WINDOW PANE/GLASS
N PUTTY
A
=7— B
59
NN ¢
MOULDING
\\ I
FIGURE 3.1
3.1.1 Identify part A.
3.1.2 Identify part B.
3.1.3 Recommend ONE other material, besides putty, that can be used
to secure the glass in position.
3.1.4 Give ONE reason why the rail and stiles of the casement are
moulded.
3.1.5 Explain the term fanlight.
3.1.6 Describe the function of C.
Copyright reserved Please turn over
(1)
(1)
(1)
(1)
(1)
(1)
Downloaded from hlayiso.com
Civil Technology: Woodworking 7 DBE/November 2021
NSC
3.2 FIGURE 3.2 below shows the front view of a free-standing cupboard without
doors.
—=} — FRONT RAIL 1 100 mm x 90 mm
Top—} OVAL HANGING
RAIL
INTERMEDIATE SIDE
=
SHELF BOARD — sine
SIDE 2 400 mm —=—
— DRAWER FRONT
526 mm x 180 mm
| a |
|
| a |
=}— BASE FRONT RAIL
BOTTOM — 80 mm HIGH
FIGURE 3.2
3.2.1 Use ANSWER SHEET 3.2.1 and complete the cutting list for the
timber needed, excluding the drawers.
Use the following specifications:
The intermediate side is positioned in the middle of the cupboard.
16 mm melamine board is used to build the cupboard.
The back is made of 16 mm melamine board.
The depth of the cupboard is 550 mm.
Copyright reserved Please turn over
(7)
Downloaded from hlayiso.com
Civil Technology: Woodworking
8
NSC
DBE/November 2021
3.2.2 Use ANSWER SHEET 3.2.2, PROJECT and draw from the given
front view a sectional view on cutting plane A-A. The depth of the
base is indicated as the starting point and should be used for the
depth of the cupboard.
Use the following specifications:
16 mm melamine board is used to build the cupboard.
The back is made of 16 mm melamine board.
The front rail is flush with the front of the cupboard.
The depth of the base is equal to the depth of the cupboard.
3.3 FIGURE 3.3 below shows the sectional left view at the bottom of the wall
panelling.
Use ANSWER SHEET 3.3 and draw the front view of FIGURE 3.3 between
the broken lines. Use scale 1 : 2 and show ALL the hidden detail.
(11)
+/)
N
aa
y
IN
[*—— PLYWOOD BOARD
WALL
SKIRTING
94 mm x 22 mm
ROUGH GROUND
50 mm x 25 mm
QUADRANT MOULDING
25 mm x 25 mm
4
|
=
t
|
FLOOR COVERING
8 mm THICK TILES
Copyright reserved
FIGURE 3.3
Please turn over
(6)
[30]
Downloaded from hlayiso.com
Civil Technology: Woodworking DBE/November 2021
9
NSC
QUESTION 4: ROOFS, CEILINGS, TOOLS, EQUIPMENT AND MATERIALS
(SPECIFIC)
Start this question on a NEW page.
4.1 Choose a description from COLUMN .B that matches an item in COLUMN A.
Write only the letter (A-K) next to the question numbers (4.1.1.to 4.1.8) in the
ANSWER BOOK, e.g. 4.1.9 L.
COLUMN A COLUMN B
4.1.1 Jack rafter A _ the internal angle created where two
sloping sections of the roof meet
4.1.2 Closed eaves
B reduces the amount of dust inside
4.1.3 Inverted box rib (IBR) the roof space
4.1.4 Truss hanger C __ roof covering attached with twisted
45° fasteners
41.5 Roof underlay .
Dan S-shaped fastener
4.1.6 Purlin
E pitched roofs that slope downwards
41.7 Valley on all sides
4.1.8 Hipped roofs F the rafter that runs from the hip
(corner) rafter to the wall plate
G pitched roofs that slope downwards
on two sides
H beam filling is not compulsory
I roof covering that is available in any
length
J roof covering is fixed to it
K__a U-shaped fastener
(8 x 1)
42 Describe what an orbital sander and a belt sander have in common with
regard to safe handling when starting and stopping the sanding process.
43 Explain the safe handling of the mortising machine with regard to the square
chisel with the drill bit (mortising attachment).
4.4 What do a belt sander and a router have in common with regard to your
hands when operating these machines?
Copyright reserved Please turn over
(8)
(2)
(2)
(1)
Downloaded from hlayiso.com
Civil Technology: Woodworking 10 DBE/November 2021
NSC
45 FIGURE 4.5 below shows a sectional view of a part of a trap door
construction. Study the drawing and answer the questions that follow.
—-— B
. > >
——— BRANDERING
CEILING
ee °
_
FIGURE 4.5
4.5.1 Identify part A. (1)
4.5.2 Identify part B. (1)
4.5.3 Name THREE materials that can be used to make C. (3)
4.5.4 Explain TWO reasons why aluminium is so popular for the
manufacturing of A. (2)
46 Name TWO types of roof trusses that are constructed by using rafters only. (2)
47 Name the horizontal member of a king post and a collar-tie roof truss
respectively. (2)
48 Name the beam that is placed at the top of a close-coupled roof truss. (1)
49 Describe the main purpose of the beam named in QUESTION 4.8. (1)
4.10 What will determine the number of queen posts to be used in a SA(Howe)
roof truss? (1)
4.11 Name TWO members that can be used to change an open-eaves roof
construction to a closed-eaves roof construction. (2)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Woodworking 1 DBE/November 2021
NSC
4.12 The steps on how to install concrete roof tiles are given below in random
order.
Analyse and rearrange the steps in the correct sequence. Write ONLY the
numbers of the statements below in the CORRECT sequence in your
ANSWER BOOK.
1.
Fix the flashing and barge boards as required.
2. Lay the first tile at the bottom of the right-hand side of the roof.
3. Attach the tiles to the eaves and gables of the roof.
4. Lay the rest of the tiles from right to left.
5. Install the ridge capping.
6. Repeat the steps until all the tiles have been laid. (6)
4.13 Name TWO types of varnish finishes. (2)
4.14 Distinguish between the equipment used to apply sanding sealer and wax. (2)
4.15 Explain what tends to happen to a wooden surface when water is spilled on it
after the surface has been waxed. (4 1
Copyright reserved
Please turn over
Downloaded from hlayiso.com
Civil Technology: Woodworking 12 DBE/November 2021
NSC
QUESTION 5: CENTERING, FORMWORK, SHORING AND GRAPHICS AS
MEANS OF COMMUNICATION (SPECIFIC)
Start this question on a NEW page.
5.1 Various options are given as possible answers to the following questions.
Choose the answer and write only the letter (A-D) next to the question
numbers (5.1.1 to 5.1.5) in the ANSWER BOOK, e.g. 5.1.6 D.
5.1.1
Copyright reserved
Double-flying shores provide temporary support ...
A
B
Cc
D
to a wall where cracks are being repaired.
where openings are cut into a wall.
to two parallel walls where one or both need(s) maintenance
- due to cracking.
All the above-mentioned
Dead shores ...
consist of vertical posts and beams (needles) that support
openings in buildings.
can be used to support the foundation of a building.
do not need any braces in its construction.
can only be erected on concrete floors.
Steel dogs are ...
A ___ used to secure the wall against the dead shore.
B driven into the folding wedges to secure them from moving.
C used to secure the sole plate to the ground.
D used to secure the joint between the prop and the needle.
Sole plates ...
A _ spread the weight transferred by the props over a wider area.
B spread the weight on top of the needle to support the wall.
C are made out of aluminium to ensure a good spread of
weight.
D must be placed above the prop to ensure a proper
load-bearing surface.
Folding wedges are placed between the ...
DaOD>
needle and the dead shore.
sole plate and the dead shore.
needle and the wall plate.
sole plate and the natural ground level.
Please turn over
(1)
(1)
(1)
(1)
(1)
Downloaded from hlayiso.com
Civil Technology: Woodworking 13 DBE/November 2021
NSC
5.2 FIGURE 5.2 below shows the shapes of two arches for which centering must
be made. Study the pictures and answer the questions that follow.
A B
FIGURE 5.2
5.2.1 identify the shape of the arch in A and B respectively. (2)
5.2.2 Name the lagging that must be used if the arch in B is built with
specially made shaped bricks. (1)
5.2.3 Determine the rise of arch B if the span of the arch is 900 mm. (1)
5.2.4 Name ONE member that is used to secure the ribs in a centre
for A. (1)
5.3 Draw in your ANSWER BOOK, in good proportion, a single-line diagram of
an SA (Howe) roof truss. Label any ONE part of the truss. (9)
5.4 ANSWER SHEET 5.4 shows the incomplete sectional view for the formwork
of a concrete beam with an attached floor on both sides of the prop.
Use ANSWER SHEET 5.4 to complete the formwork around the beam and
attached floor. Label any ONE of the parts of the formwork above the bearer. (11)
[30]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Woodworking 14 DBE/November 2021
NSC
QUESTION 6: SUSPENDED FLOORS, STAIRCASES, IRONMONGERY, DOORS
AND JOINING (SPECIFIC)
Start this question on a NEW page.
6.1 QUESTIONS 6.1.1 to 6.1.4 below describe some of the properties or
advantages of different locks.
Name the lock that:
6.1.1 Has the advantage of automatically locking doors when it closes,
making them efficient in securing external doors (1)
6.1.2 Is mortised into one of the door stiles, while the back plate is
screwed onto the door jamb (1)
6.1.3 Is used as a temporary lock for doors, gates and sheds (1)
6.1.4 Is screwed onto the internal surfaces of doors and drawers of
cupboards (1)
6.2 FIGURE 6.2 below shows the incomplete assembled view of an open
haunched mortice and tenon joint. Study the picture and answer the questions
that follow.
A
B
FIGURE 6.2
6.2.1 Name the TWO adjoining parts in the construction of a table where
this joint will be used. (2)
6.2.2 Use ANSWER SHEET 6.2.2 and draw, in good proportion an
ISOMETRIC view of the joint on part A. (8)
Copyright reserved Please turn over
Civil Technology: Woodworking 15 DBE/November 2021
NSC
6.3 Explain, by means of a two-dimensional freehand sketch in your ANSWER
6.4
6.5
6.6
Downloaded from hlayiso.com
BOOK, how you would fix the floor joists for an upper-level suspended timber
floor, if the joists cannot be built into the wall.
Explain, by means of two-dimensional freehand sketches, the difference
between a straight flight of stairs with a landing and a stairwell with a half
landing.
ANSWER SHEET 6.5 shows an_ incomplete sectional view of
a suspended timber floor with tongue and groove floor boards.
Draw a complete sectional view on the ANSWER SHEET.
, The following must be drawn:
Closure of opening between wall and floor boards
Members to support the floorboards
One-brick pier with foundation
Prevention of termites and moisture
FIGURE 6.6 below shows a part of the front elevation of an entrance door with
a fixed sidelight fitted in a door frame.
I=— FRAME HEAD
j=— TOP RAIL OF SIDELIGHT
[=- GLASS
STILE OF SIDELIGHT
ENN
LOW MIDDLE RAIL OF SIDELIGHT
YALTI|_YA
I=— RAISED AND FIELDED PANEL OF SIDELIGHT
ne FRAME STILE
[=- BOTTOM RAIL OF SIDELIGHT
FIGURE 6.6
Use ANSWER SHEET 6.6 and draw, in a good proportion, a horizontal
sectional view on section line A-A.
TOTAL:
Copyright reserved
(3)
(5)
(10)
(8)
[40]
200
Downloaded from hlayiso.com
Civil Technology: Woodworking 16 DBE/November 2021
NSC
| CENTRE NUMBER: [ [| [| 7 J LJ
[EXAMINATION NUMBER: [| | | | | L [| [ J J
ANSWER SHEET 2
NO. QUESTIONS ANSWERS MARKS
Identify the scale you will use for the
1. site plan and the floor plan 2
respectively.
Who is responsible to verify all
2. dimensions and levels on site before 1
commencing work?
What type of fencing does the
3. architect recommend for the new 1
dwelling?
State the colour that you would use to
4. indicate the new dwelling on the site 1
plan.
5. Identify number 1. 1
6. Identify number 2. 1
7. Identify number 3. 1
8. Identify number 4. 1
9. Identify number 5. 4
10. | Identify number 6. 1
11. | Identify number 7. 41
12. | Identify number 8. 1
13. | Identify number 9. 1
Determine the distance between
14. | number 2 and the new dwelling on the 1
eastern side of the building.
15 Deduce the plot number of the new 1
* | dwelling from FIGURE A.
16 Which elevation. is the closest to 1
* | Loerie Street?
What is the plot number of the
17. | property on the western side of the 41
dwelling?
Copyright reserved
Downloaded from hlayiso.com
Civil Technology: Woodworking DBE/November 2021
NSC
18. | Deduce TWO faults on FIGURE B.
19 Which natural feature is indicated on
“_| the site plan?
What is wrong with the electrical
20. | installation in the bathroom in
FIGURE B?
21. | Identify number 10.
22. | Identify number 11.
23. | identify number 12.
24. | Identify number 13.
25. | Draw the symbol of a socket outlet.
26. | Draw the symbol for a shower.
Draw the symbol for a wall-mounted
27. | light.
28. | Recommend TWO uses for ROOM A.
Calculate the omitted horizontal
29. | dimension on the site plan. Give your
answer in mm. Show ALL calculations.
TOTAL:
Copyright reserved
Downloaded from hlayiso.com
Civil Technology: Woodworking DBE/November 2021
| CENTRE NUMBER: EL] | | 7 yy]
[EXAMINATIONNUMBER: | | | | | | | [| | [| [| [7 J J
ANSWER SHEET 3.2.1
Member Quantity | Unit | Length | Width | Thickness Material
Side 2 mm 2 400 _ 16 Melamine
Bottom _ mm 1 068 550 16 Melamine
Top 1 mm} 550 16 Melamine
Base front rail 1 mm 1 068 _ 16 Melamine
Shelf board 4 mm 550 _ 16 Melamine
Intermediate side 1 mm | 550 16 Melamine
Back , 1 mm | 1 100 16 Melamine
(7)
Copyright reserved
Downloaded from hlayiso.com
Civil Technology: Woodworking DBE/November 2021
[| CENTRE NUMBER: | | | | 7 TT]
[EXAMINATIONNUMBER: | | | | [| | | | [| | [| [ [ |
ANSWER SHEET 3.2.2
FRONT RAIL —-=
TOP —j]
OVAL HANGING
RAIL
SHELF _|P7
BOARD
INTERMEDIATE
SIDE
SIDE +
DRAWER FRONT
[ | q J
BOTTOM
aS
BASE FRONT RAIL
———n|
ren DEPTH OF BASE
ASSESSMENT CRITERIA MARK _| CANDIDATE'S MARK (CM)
Correctness of drawing 10
Hatching 1
TOTAL: 11
Copyright reserved
Downloaded from hlayiso.com
Copyright reserved
Civil Technology: Wocdworking DBE/November 2021
NSC
[| CENTRE NUMBER: TT TTT
[EXAMINATIONNUMBER: | | | | | | | | |
ANSWER SHEET 3.3
ASSESSMENT CRITERIA MARK cM
Correctness of drawing 5
Application of scale 1
TOTAL: 6
Downloaded from hlayiso.com
Civil Technology: Woodworking DBE/November 2021
NSC
[CENTRE NUMBER: [| T | JT J 7 [ )
[EXAMINATIONNUMBER: | | | | | | | | | | | [| J{ |
ANSWER SHEET 5.4
=
2S — yd
°
°
0
818
wv
al
ASSESSMENT CRITERIA MARK CM
Correctness of drawing 10
Label (Any ONE) 1
TOTAL: 11
Copyright reserved
Downloaded from hlayiso.com
Civil Technology: Woodworking DBE/November 2021
| CENTRE NUMBER: [TTT TTT TT
[EXAMINATIONNUMBER: | | | | | | | | | | | | J 4
ANSWER SHEET 6.2.2
ASSESSMENT CRITERIA MARK cM
Correctness of drawing 8
TOTAL: 8
Copyright reserved
Downloaded from hlayiso.com
Civil Technology: Woodworking DBE/November 2021
| CENTRE NUMBER: LT [ [7 [TT ]
[EXAMINATIONNUMBER: | | | | | | | | | | [ [| | |
ANSWER SHEET 6.5
DIRECTION OF GRAIN ——=—
TONGUE AND GROOVE FLOOR BOARDS
NGL
ASSESSMENT CRITERIA MARK CM
Correctness of drawing 10
TOTAL: 10
Copyright reserved
Downloaded from hlayiso.com
Civil Technology: Woodworking DBE/November 2021
NSC
| CENTRE NUMBER: I TT TT Ty 7]
[ EXAMINATION NUMBER: | LTT TT JT [ 7 7 TT 7]
ANSWER SHEET 6.6
ASSESSMENT CRITERIA MARK cM
Correctness of drawing 8
TOTAL: 8
Copyright reserved
Study this subject
Recommended for this subject
%20Eng_hlayiso.com_--dcb7f976-b3d6-42a9-b2b1-44ae9b2d8e3f/v1-323df2bd04b35e089240/card.webp)
Question paper
Civil Technology Grade 12 NSC November 2021 QP (Eng)
%20Eng_hlayiso.com_--f39d7571-db9f-4ded-b5e7-27008235ca8b/v1-4efe03b2e24afe8e530e/card.webp)
Question paper
Civil Technology Grade 12 NSC November 2021 QP (Eng)

Question paper
Civil Technology Grade 12 Eastern Cape Mock 2021 QP (Afr)

Question paper
Civil Technology Grade 12 Eastern Cape Mock 2021 QP (Eng)
%20Eng_hlayiso.com_--8f870317-4f98-4448-b660-0d528b30c2a4/v1-c304a8b770601b9842d8/card.webp)
Question paper
Civil Technology Grade 12 NSC June 2021 Question Paper (Eng)
%20Afr_hlayiso.com_--ff7a7835-2450-4747-baaf-85c46ef7d411/v1-8ec16443e4393e6a6260/card.webp)
Question paper
Civil Technology Grade 12 NSC June 2021 Question Paper (Afr)
More from Grade 12 Civil Technology
%20(Afrikaans)%20June%202025%20Possible%20Answers--c0a65d19-28ca-4ac3-8c61-d4627d2a3133/v1-5f42c573694769cf80ce/card.webp)
Memorandum
Civil Technology Grade 12 Gauteng June 2025 Memo (Afrikaans)
%20MG%20Eng--0e265899-dc44-4809-aabf-8f374f1af392/v1-73a07814cfc9334618a1/card.webp)
Memorandum
Civil Technology Grade 12 NSC November 2025 Memo (English)

Memorandum
Civil Technology Grade 12 Eastern Cape Prelim 2024 Memo

Memorandum
Civil Technology Grade 12 Eastern Cape Prelim 2024 Memo

Memorandum
Civil Technology Grade 12 Eastern Cape Prelim 2024 Memo

Memorandum