Skip to content

Civil Technology Grade 12 NSC November 2021 QP (Eng)

Question paperCivil TechnologyGrade 12202122 pages

Grade 12 Civil Technology question paper from the NSC November Exam 2021 (English), 22 pages. Read online or download the free PDF.

Free to read online, no sign-up needed

Loading document…

Loading document…

Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com NATIONAL SENIOR CERTIFICATE GRADE 12 CIVIL TECHNOLOGY: CONSTRUCTION NOVEMBER 2021 MARKS: 200 TIME: 3 hours This question paper consists of 15 pages and 6 answer sheets. Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 2 DBE/November 2021 NSC REQUIREMENTS: 1. Drawing instruments 2. A non-programmable calculator 3. ANSWER BOOK INSTRUCTIONS AND INFORMATION 1. This question paper consists of SIX questions. 2. Answer ALL the questions. 3. Read all questions carefully. 4. Answer each question as a whole. Do NOT separate subsections of questions. 5. Number the answers correctly according to the numbering system used in this question paper. 6. Start the answer to EACH question on a NEW page. 7. Do NOT write in the margins of the ANSWER BOOK. 8. You may use sketches to illustrate your answers. 9. Write ALL calculations and answers in the ANSWER BOOK or on the attached ANSWER SHEETS. 10. Use the mark allocation as a guide to the length of your answers. 11. Make drawings and sketches in pencil, fully dimensioned and neatly finished off with descriptive titles and notes to conform to the SANS/SABS Code of Practice for Building Drawings. 12. For the purpose of this question paper, the size of a brick should be taken as 220 mm x 110 mm x 75 mm. 13. Use your own discretion where dimensions and/or details have been omitted. 14. Answer QUESTIONS 2, 3.13, 3.14, 6.5, 6.6 and 6.9 on the attached ANSWER SHEETS using drawing instruments, where necessary. 15. Write your CENTRE NUMBER and EXAMINATION NUMBER on every ANSWER SHEET and hand them in with your ANSWER BOOK, whether you have used them or not. 16. Drawings in the question paper are NOT to scale due to electronic transfer. 17. Google Images was used as the source of all photographs and pictures. 18. Write neatly and legibly. Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 3 DBE/November 2021 NSC QUESTION 1: OHSA, SAFETY, MATERIALS, TOOLS, EQUIPMENT AND JOINING (GENERIC) Start this question on a NEW page. 1.1 Give ONE word/term for each of the following descriptions by choosing a word/term from the list below. Write down only the word/term next to the question numbers (1.1.1. to 1.1.5) in the ANSWER BOOK, e.g. 1.1.6 casement. damp seal; powder coating; galvanising; sanding; paint; electroplating; curing; plastering; silicone 1.1.1 To cover steel or iron with a layer of zinc (1) 1.1.2 Available in a water and oil base (1) 1.1.3 Improves mechanical and engineering properties of metals (1) 1.1.4 Process of keeping fresh concrete moist (1) 1.1.5 Applying as a finish to materials to resist extreme temperatures (1) 1.2 FIGURE 1.2 below shows scaffolding that is used on a construction site to reach the upper parts of a building. FIGURE 1.2 1.2.1 Describe TWO aspects the scaffolding must adhere to before it is used. (2) 1.2.2 Name the omitted part in FIGURE 1.2 that should be fixed to the platform of the scaffold to prevent tools from falling off. (1) 1.2.3 Explain TWO safety precautions that have to be adhered to when working on scaffolding. (2) Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 4 DBE/November 2021 NSC 1.3 State TWO methods that can be used to remove waste material safely from high places. (2) 1.4 Describe TWO regulations regarding the safe use of trestle scaffolds. (2) 1.5 Describe ONE precautionary measure you would apply when hoisting material and equipment in a builder's hoist. (1) 1.6 Explain in THREE chronological steps how you will join TWO solid 4 mm metal plates with a bolt and nut after the positions of the holes have been marked on the plates. (3) 1.7 Complete in your ANSWER BOOK the information in the table below by indicating ONE use and ONE way to care for the tool. NAME OF TOOL USE WAY TO CARE Multi-detector To locate … Protect the multi-detector against … (2) [20] QUESTION 2: GRAPHICS AS MEANS OF COMMUNICATION (GENERIC) FIGURE A and B on the next page shows drawings that appear on a building plan. Analyse the drawings and complete the table on ANSWER SHEET 2. Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 5 DBE/November 2021 NSC PLOT 33 NOTES: 24 500 Contractors must verify all dimensions and levels on site before commencing work. Architects must 1 be notified immediately of any 5 000 9 000 3 000 5 000 discrepancies. Wall thickness: External = 220 mm LOERIE STREET 2 Internal = 110 mm 4 000 w 3 Architect's signature ………………. PLOT 29 NEW 31 000 13 160 DWELLING Client's signature ……………………. 9 4 Palisade fencing must be erected on 3 220 5 the boundary of the new dwelling. PLOT 31 w 2 000 3 000 1 000 WIDE EAGLE STREET 6 8 7 FIGURE A PLOT 35 220 110 110 4 000 4 450 220 REVISION 1 DATE DESCRIPTION 20/06/2021 CONTOUR LINES 11 DINING ROOM PRINTED BY: DATE OF PRINT: 3 500 KITCHEN GEMINI PRINTERS 01/06/2021 13 DRAWING TITLE: 1 : 10 SITE AND FLOOR PLAN PLOT 31 LIVING ROOM 110 PROJECT: 10 PROPOSED DWELLING ON PLOT 31, 5 000 HEROLDS BAY BATHROOM 12 PROJECT NO. DRAWING NO. GR 228-510 339P7 DATE DRAWN CHECKED 110 18/05/2021 JP BLOM G BOK 4 000 SITE PLAN SCALE: 1 : 200 BEDROOM 1 BEDROOM 2 FLOOR PLAN SCALE 1 : 100 3 000 REFERENCE CODE 220 QP 2 - 2021 FIGURE B ROOM A 220 [40] Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 6 DBE/November 2021 NSC QUESTION 3: ROOFS, STAIRCASES AND JOINING (SPECIFIC) Start this question on a NEW page. 3.1 Name ONE balustrade pattern. (1) 3.2 Describe ONE method which could be considered to mount timber handrails to walls. (1) 3.3 What is the minimum vertical distance between the pitch line and the handrail of a staircase? (1) 3.4 Explain why aprons are used in staircases. (1) 3.5 Under normal conditions, when using standard concrete mixtures, after how many days can the formwork on the underside of a staircase be removed? (1) 3.6 What could be used to fasten a steel column to a concrete base with threaded rods secured into it? (1) 3.7 Name ONE type of cast-in anchor that is used in concrete connections. (1) 3.8 Name the roof component that is placed on top of a wall to distribute the load of the roof evenly. (1) 3.9 Name the roof component of an SA(Howe) roof truss that joins the rafters. (1) 3.10 State the colour of the roof underlay that is used for tiled roofs to prevent water leaks. (1) 3.11 What type of roof truss consists of rafters only? (1) 3.12 What type of roof truss consists of two rafters and a ridge beam? (1) 3.13 Use ANSWER SHEET 3.13 and draw, in good proportion, a neat sketch of the front elevation of an SA(Howe) roof truss. Use the distance between the walls as the span of the roof truss. (10) 3.14 Use ANSWER SHEET 3.14 and draw to scale 1 : 10 the front elevation of a closed-coupled roof truss. The pitch of the roof is 30°. (8) [30] Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 7 DBE/November 2021 NSC QUESTION 4: EXCAVATIONS, FORMWORK, TOOLS, EQUIPMENT AND MATERIALS (SPECIFIC) Start this question on a NEW page. 4.1 Choose a description from COLUMN B that matches an item in COLUMN A. Write only the letter (A–L) next to the question numbers (4.1.1 to 4.1.8) in the ANSWER BOOK, e.g. 4.1.9 N. COLUMN A COLUMN B 4.1.1 Tin A seals air and water leaks 4.1.2 Ready-mixed concrete B easy to weld 4.1.3 Brass C pumping water to a higher level 4.1.4 Aluminium D non-acid-resistant or alkali-proof 4.1.5 Lead E copper is the main ingredient 4.1.6 PVC (polyvinylchloride) F reddish brown 4.1.7 Silicone G used for waste-water systems 4.1.8 Copper H has the same density throughout I silver-white in colour J low melting point K prevent corrosion L reinforcement in a concrete floor (8 x 1) (8) 4.2 Name ONE consequence of neglecting to determine the location of services, like water pipes, electrical cables and gas lines before excavation commences. (1) 4.3 Describe THREE safety precautions to be considered for excavation operations at night. (3) Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 8 DBE/November 2021 NSC 4.4 FIGURE 4.4 below shows the incomplete shuttering for a shallow trench in firm soil. Study the drawing and answer the questions that follow. 152 x 38 mm POLING BOARDS FIGURE 4.4 4.4.1 Identify any TWO members that have been omitted in FIGURE 4.4 and predict the likely consequence if these members are omitted during excavations. (3) 4.4.2 Draw in your ANSWER BOOK a neat two-dimensional drawing of the complete shuttering for firm soil showing ALL the members. (5) 4.5 Explain the following terms related to formwork: 4.5.1 Striking (1) 4.5.2 Releasing oil/Form oil (1) 4.5.3 Soffit board (1) Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 9 DBE/November 2021 NSC 4.6 FIGURE 4.6 below shows formwork in a construction process. Study the drawing and answer the questions that follow. A C B D E FIGURE 4.6 4.6.1 Identify the type of formwork. (1) 4.6.2 Identify A to E. (5) Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 10 DBE/November 2021 NSC 4.7 Tools and equipment are used extensively on a building site. Study the illustrations shown in FIGURE 4.7 below and answer the questions that follow. A B C FIGURE 4.7 4.7.1 Name THREE types of personal protective equipment that should be worn while using the equipment in FIGURE 4.7. (3) 4.7.2 Recommend ONE method that can be used to prevent the drum from rusting in A. (1) 4.8 Name the type of tests that can be conducted on concrete to determine the strength and workability respectively. (2) 4.9 What is the resting time in a laboratory before testing the strength of concrete? (1) 4.10 Name the TWO categories in which metals can be classified. (2) 4.11 Explain TWO reasons why cladding is used in a building. (2) [40] Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 11 DBE/November 2021 NSC QUESTION 5: PLASTER AND SCREED, BRICKWORK AND GRAPHICS AS MEANS OF COMMUNICATION (SPECIFIC) Start this question on a NEW page. 5.1 The pictures in FIGURE 5.1 below show steps of a building process. Study the pictures and answer the questions that follow. A B C D FIGURE 5.1 5.1.1 Rearrange the pictures for this building process in the CORRECT order from start to finish, using the letters A to D and give a short description of what is being done in EACH picture. (8) 5.1.2 Explain why the process in C is necessary. (1) 5.1.3 Name ONE admixture that can be added to the material to enhance the plasticity of the mixture. (1) 5.2 Explain the following terms that apply to paving: 5.2.1 Jointing (1) 5.2.2 Bedding sand (1) 5.2.3 Walkways (1) 5.3 Draw, in good proportion, neat freehand sketches of the following paving types in your ANSWER BOOK. The paving must be laid from a corner to create a pattern. 5.3.1 Basket-weave paving pattern (5) 5.3.2 Herringbone paving pattern (5) Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 12 DBE/November 2021 NSC 5.4 FIGURE 5.4 shows the front view of a cavity wall. A FIGURE 5.4 5.4.1 Why is there a need for the darkened and circled part A? (1) 5.4.2 Describe where the weep holes in a cavity wall should be positioned. (1) 5.4.3 Explain the purpose of a weep hole. (1) 5.5 Draw, in your ANSWER BOOK, a neat sketch of the horizontal section of a steel door frame built into a half-brick wall, with face bricks and plastered on one side. (4) [30] Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 13 DBE/November 2021 NSC QUESTION 6: REINFORCEMENT IN CONCRETE, FOUNDATIONS, CONCRETE FLOORS AND QUANTITIES (SPECIFIC) Start this question on a NEW page. 6.1 Various options are given as possible answers to the following questions. Choose the answer and write only the letter (A–D) next to the question numbers (6.1.1 to 6.1.5) in the ANSWER BOOK, e.g. 6.1.6 D. 6.1.1 These foundations distribute the loads across stable ground, whether they are used under the ground or under water: A Raft foundation B Step foundation C Pile foundation D All the above-mentioned (1) 6.1.2 This foundation is used where the lengths of the piles differ: A Steel-tube caisson piles B Precast concrete pile C Driven in-situ piles D Hollow piles (1) 6.1.3 Which ONE of the following factors will NOT be considered when installing pile foundations? A Type of formwork B Sturdy pile cap C Pouring of concrete D Type of soil (1) 6.1.4 The pile foundation can be used in … A poor soil. B water. C sand. D All the above-mentioned (1) 6.1.5 A drop hammer is operated with a ... A crane. B hoist. C lift. D conveyor. (1) Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 14 DBE/November 2021 NSC 6.2 To support the floor, how far apart should the props and bearers be placed from one another under the ribs? (1) 6.3 State the minimum length of the end bearing of ribs on the load-bearing walls. (1) 6.4 Where will you place the damp-proof course before placing the rib and block? (1) 6.5 ANSWER SHEET 6.5 shows an incomplete rib and block floor. Use ANSWER SHEET 6.5 and draw, in good proportion, the rib and block floor up to finished floor level. Indicate ALL omitted detail. Label any ONE part. (9) 6.6 FIGURE 6.6 below shows an incomplete vertical sectional view through a continuously supported beam. Study FIGURE 6.6 and answer the questions that follow: A B FIGURE 6.6 6.6.1 Identify part A. (1) 6.6.2 Identify part B. (1) 6.6.3 Use ANSWER SHEET 6.6 and draw the reinforcing of the part encircled. Show and label the minimum concrete cover depth. (6) 6.7 Explain TWO reasons why cover depth is important for reinforcing in concrete. (2) Copyright reserved Please turn over
Downloaded from hlayiso.com Civil Technology: Construction 15 DBE/November 2021 NSC 6.8 State the minimum depth of concrete covering for the following conditions of exposure in mm: 6.8.1 Severe exposure (1) 6.8.2 Moderate exposure (1) 6.8.3 Extreme exposure (1) 6.9 FIGURE 6.9 below shows the floor plan of a garage with a window and an opening for a door. 4 000 3 000 8 500 FIGURE 6.9 Use the following specifications:  The external walls are 220 mm thick.  The internal wall is 110 mm thick.  The internal wall is 2 600 mm high.  50 bricks are used per m2 for a half-brick wall. Use the dimension paper on ANSWER SHEET 6.9 and calculate the quantities of the following materials: 6.9.1 The length of damp-proof course (DPC) needed for external walls in m (6) 6.9.2 The total number of bricks needed for the internal wall (4) [40] TOTAL: 200 Copyright reserved
Downloaded from hlayiso.com Civil Technology: Construction DBE/November 2021 NSC CENTRE NUMBER: EXAMINATION NUMBER: ANSWER SHEET 2 NO. QUESTIONS ANSWERS MARKS Identify the scale you will use for the 1. site plan and the floor plan 2 respectively. Who is responsible to verify all 2. dimensions and levels on site before 1 commencing work? What type of fencing does the 3. architect recommend for new 1 dwelling? State the colour that you would use to 4. indicate the new dwelling on the site 1 plan. 5. Identify number 1. 1 6. Identify number 2. 1 7. Identify number 3. 1 8. Identify number 4. 1 9. Identify number 5. 1 10. Identify number 6. 1 11. Identify number 7. 1 12. Identify number 8. 1 13. Identify number 9. 1 Determine the distance between 14. number 2 and the new dwelling on the 1 eastern side of the building. Deduce the plot number of the new 15. 1 dwelling from FIGURE A. Which elevation is the closest to 16. 1 Loerie Street? What is the plot number of the 17. property on the western side of the 1 dwelling? Copyright reserved
Downloaded from hlayiso.com Civil Technology: Construction DBE/November 2021 NSC 18. Deduce TWO faults on FIGURE B. 2 Which natural feature is indicated on 19. 1 the site plan? What is wrong with the electrical 20. installation in the bathroom in 1 FIGURE B? 21. Identify number 10. 1 22. Identify number 11. 1 23. Identify number 12. 1 24. Identify number 13. 1 25. Draw the symbol of a socket outlet. 2 26. Draw the symbol for a shower. 2 Draw the symbol for a wall-mounted 27. light. 2 28. Recommend TWO uses for ROOM A. 2 Calculate the omitted horizontal 29. dimension on the site plan. Give your 6 answer in mm. Show ALL calculations. TOTAL: 40 Copyright reserved
Downloaded from hlayiso.com Civil Technology: Construction DBE/November 2021 NSC CENTRE NUMBER: EXAMINATION NUMBER: ANSWER SHEET 3.13 FIGURE 3.13 ASSESSMENT CRITERIA MARK CM Correctness of drawing 8 One label with dimensions 2 TOTAL: 10 Copyright reserved
Civil Technology: Construction Downloaded from hlayiso.com DBE/November 2021 NSC CENTRE NUMBER: EXAMINATION NUMBER: ANSWER SHEET 3.14 ASSESSMENT CRITERIA MARK CM Correctness of drawing 6 Application of scale 2 TOTAL: 8 Copyright reserved
Downloaded from hlayiso.com Civil Technology: Construction DBE/November 2021 NSC CENTRE NUMBER: EXAMINATION NUMBER: ANSWER SHEET 6.5 FIGURE 6.5 ASSESSMENT CRITERIA MARK CM Correctness of drawing 8 Any one label 1 TOTAL: 9 Copyright reserved
Downloaded from hlayiso.com Civil Technology: Construction DBE/November 2021 NSC CENTRE NUMBER: EXAMINATION NUMBER: ANSWER SHEET 6.6 FIGURE 6.6 ASSESSMENT CRITERIA MARK CM Correctness of drawing 6 TOTAL: 6 Copyright reserved
Downloaded from hlayiso.com Civil Technology: Construction DBE/November 2021 NSC CENTRE NUMBER: EXAMINATION NUMBER: ANSWER SHEET 6.9 A B C D 6.9.1 (6) 6.9.2 (4) Copyright reserved

Study this subject

More from Grade 12 Civil Technology

View all