Downloaded from hlayiso.com
GRAAD 12
NATIONAL
SENIOR CERTIFICATE
GRADE 12
CIVIL TECHNOLOGY: CIVIL SERVICES
NOVEMBER 2021
MARKING GUIDELINES
MARKS: 200
These marking guidelines consist of 19 pages.
Copyright reserved Please turn over
Skip to contentAll 2021 papers %20Eng_hlayiso.com_--dcb7f976-b3d6-42a9-b2b1-44ae9b2d8e3f/v1-323df2bd04b35e089240/card.webp)
%20Eng_hlayiso.com_--f39d7571-db9f-4ded-b5e7-27008235ca8b/v1-4efe03b2e24afe8e530e/card.webp)

%20%20MG%20Afr_hlayiso.com_--42b5315c-825c-40e3-b394-85e0253fc0fb/v1-6058b260e68654519cc3/card.webp)
%20Memo%20Eng_hlayiso.com_--f06cef7f-235e-45f7-9f9b-f8e6a2b0c0ca/v1-45ae92f9d9d194afe959/card.webp)
%20Memo%20Afr_hlayiso.com_--8cffc125-69c0-44e9-b0eb-88ae7e930363/v1-fca2156d2557644edb35/card.webp)
View all%20(English%20and%20Afrikaans)%20June%202025%20Question%20Paper--c8edd459-5237-48e0-8588-69d7ecd7f8e5/v1-be996aaed91bf782e098/card.webp)
%20Afr--591d6ffd-20b1-4748-a1ba-b055be0a14c3/v1-4d98a131fd37e013458a/card.webp)
%20Afr--05a95faf-5891-4d88-9e5e-7d13c1d21648/v1-f5ca67113376f7457b83/card.webp)


%20Afr--eefaae29-fe93-4b75-8223-87bf4f3fc14c/v1-3553acfa446acbaa2a45/card.webp)
Civil Technology Grade 12 NSC November 2021 Memo (English)
Grade 12 Civil Technology memorandum from the NSC November Exam 2021 (English), 19 pages. Read online or download the free PDF.
Civil Technology · Grade 12 · NSC November Exam · 2021. Memorandum. Read online or download the PDF.
- Subject
- Civil Technology
- Grade
- Grade 12
- Document type
- Memorandum
- Year
- 2021
- Exam period
- NSC November Exam
- Curriculum
- CAPS
- Pages
- 19
- File size
- 429.9 KB
Free to read online, no sign-up needed
Loading document…
Loading document…
1 of 19
This exam
Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com
Civil Technology: Civil Services 2 DBE/November 2021
NSC – Marking Guidelines
INSTRUCTIONS FOR THE MARKERS
1. Markers should:
Familiarise themselves with the question and answer before evaluating the
responses of candidates.
Always interpret the responses of the candidates within the context of the
question.
Consider any relevant and acceptable answer during pre-marking but
should strictly adhere to the answers after finalisation of the marking
guidelines.
There are two approaches to answering questions, these are (1) to describe
and (2) to explain.
If a candidate is required to explain e.g., a process in 4 steps, only the first 4
responses should be considered.
If, however a candidate is required to e.g. explain or describe how to
transfer heights from one point to another using a transparent pipe level we
need to consider that candidates may write a long description not
necessarily well organised as an intellectual response may do. In this case
the marker needs to evaluate the complete statement to judge if the
candidate explained the required outcome satisfactorily and allocate marks
on merit. The marker should apply his/her professional judgement with
these types of questions.
Mark what the candidate wrote and do not award marks for answers that the
marker thinks the candidate meant with what was written.
Indicate the tick or cross right at the position where the mark needs to be
awarded or where the candidate made the error.
Accept the letter corresponding with the correct answer as well as the
answer written in full in multiple-choice questions.
Accept incorrect spelling in one-word answers unless the spelling changes
the meaning of the answer.
2. For calculations:
A mark is only awarded if the correct unit is written next to the answer.
If TWO marks are awarded, ONE mark is awarded for the answer and ONE
mark for the correct unit.
Where the candidate made a principle error, e.g. use an incorrect method to
calculate the answer, marks will be awarded for the correct values used in
the calculation. No marks will be awarded for the answer of the incorrect
method that was followed.
Where an incorrect answer could be carried over to the next step, the first
answer will be deemed incorrect. However, should the incorrect answer be
carried over correctly, the marker has to recalculate the values, using the
incorrect answer from the first calculation. If correctly used, the candidate
should receive the full marks for subsequent calculations.
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 3 DBE/November 2021
NSC – Marking Guidelines
Markers should consider when and where a candidate has rounded off in
a calculation, as well as the subsequent effect it has on the final answer
obtained. The mark for calculations should therefore be awarded on
merit.
Alternative methods of calculations must be considered, provided that the
correct answer is obtained.
3. When marking drawings:
The member for which the mark should be awarded should be drawn
correctly in the correct position to receive a mark.
A member incorrectly drawn but wrongfully repeated in another position will
be awarded the mark for the repeated incorrect member, provided that the
marking guidelines provide for TWO or more marks for that member
(positive marking).
Marks can only be awarded for a label if the label is correctly indicating the
correct member.
Scale drawings should always be marked using an appropriate mask.
When a candidate drew the wrong drawing, e.g.:
A horizontal sectional view instead of a vertical sectional view, no marks will
be allocated to the drawing as the candidate did not respond to the
expected outcome.
An orthographic view instead of a sectional view, no marks will be allocated
to the drawing as the candidate did not respond to the expected outcome.
An orthographic view instead of an isometric view, no marks will be
allocated to the drawing as the candidate did not respond to the expected
outcome.
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 4 DBE/November 2021
NSC – Marking Guidelines
QUESTION 1: OHSA, SAFETY, MATERIALS, TOOLS, EQUIPMENT AND JOINING
(GENERIC)
1.1 1.1.1 Galvanising (1)
1.1.2 Paint (1)
1.1.3 Electroplating (1)
1.1.4 Curing (1)
1.1.5 Powder coating (1)
1.2 1.2.1 Scaffolding must be:
Properly propped against displacement.
Able to carry the mass or load.
Securely and effectively braced to ensure stability/Stable.
Secured at suitable vertical and horizontal distances to the
structure.
Free of defects/sharp edges.
Constructed so that it has a safety factor of at least two.
Levelled.
Inspected regularly.
ANY TWO OF THE ABOVE (2)
1.2.2 Toe-board/Kickboard (1)
1.2.3 When working on scaffolding:
Wear a safety harness/safety equipment/PPE.
Do not throw any materials from a scaffold.
Do not throw any tools from a scaffold.
Never jump from a scaffold.
Do not overload a scaffold.
Remove or cover sharp edges or corners of a scaffold.
Scaffolds should be kept free of waste/obstructions.
ANY TWO OF THE ABOVE (2)
1.3 To remove waste:
Use a chute/pipe chute
Use a conveyor belt/ramp
Use a bucket with a rope/pulley system
Use a forklift/mobi-lift/TLB/crane with a bucket/builders’ hoist
ANY TWO OF THE ABOVE (2)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 5 DBE/November 2021
NSC – Marking Guidelines
1.4 Safe use of trestle scaffolds:
Scaffolds should be soundly constructed of solid material.
All precautionary measures should be taken to prevent the unexpected
spreading of its supporting legs when in use.
Trestles should not exceed a height of 3 m.
Trestles scaffolds should not consist of more than two tiers.
ANY TWO OF THE ABOVE (2)
1.5 Hoisting materials and equipment in a builder’s hoist:
Materials and equipment should be firmly stacked.
Materials and equipment should be correctly stacked.
Materials and equipment should be properly secured.
Gates must be shut when in use.
Overhead protection must be provided.
Qualified person must operate the builders' hoist.
Emergency brake mechanism must be installed.
Not exceed the working capacity of the hoist/Not overload the hoist.
Safety measures must be displayed inside the cage.
ANY ONE OF THE ABOVE (1)
1.6 Drill a hole through the two metal plates.
Insert the bolt into the drilled holes.
Fasten the two plates with a bolt and nut. (3)
1.7 Used to locate:
Materials behind walls.
Materials in ceilings.
Materials under floors.
Steel bars
Copper pipes
Ferrous metals
Non-ferrous metals
Electrical wiring
Services
Wood/Wooden/metal studs behind walls.
The distance to and from an object.
ANY ONE OF THE ABOVE (1)
Care
Protect the multi-detector against:
Moisture/Water/Corrosion
Direct sunlight/heat
Extreme temperature changes
Bumps/Falling
Damage caused by the release of acid from the battery
ANY ONE OF THE ABOVE (1)
[20]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 6 DBE/November 2021
NSC – Marking Guidelines
QUESTION 2: GRAPHICS AS MEANS OF COMMUNICATION (GENERIC)
ANSWER SHEET 2
NO. QUESTIONS ANSWERS MARKS
Identify the scale you will use for the 1 : 200
1. site plan and the floor plan 2
respectively. 1 : 100
Who is responsible to verify all
2. dimensions and levels on site before Contractors 1
commencing work?
What type of fencing does the
3. architect recommend for the new Palisade fencing/Palisade 1
dwelling?
State the colour that you would use to
4. indicate the new dwelling on the site Red 1
plan.
5. Identify number 1. Boundary line 1
6. Identify number 2. Building line 1
7. Identify number 3. Electricity meter/Watt meter 1
8. Identify number 4. Entrance/Exit/Driveway 1
9. Identify number 5. Water storage tank/Water tank 1
10. Identify number 6. Pavement/Walkway/Sidewalk 1
North point/North symbol/North
11. Identify number 7. 1
sign/North direction
Municipal connection/Municipal
12. Identify number 8. 1
manhole/Main sewer connection
13. Identify number 9. Manhole 1
Determine the distance between
14. number 2 and the new dwelling on the 4 000 mm/4 m 1
eastern side of the building.
Deduce the plot number of the new
15. Plot 31 1
dwelling from FIGURE A.
Which elevation is the closest to
16. South elevation/South 1
Loerie Street?
What is the plot number of the
17. property on the western side of the Plot 35 1
dwelling?
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 7 DBE/November 2021
NSC – Marking Guidelines
No window in the dining room
110 mm of outside wall is incorrect/
Internal wall thickness
Light switch in bathroom is in wrong
place
220 mm inside wall in room A is
incorrect/External wall thickness
No step at the kitchen door
No door in dining room/living
room/door opening 2
18. Deduce TWO faults on FIGURE B.
No arch indicated at dining
room/living room
Floor covering not indicated in
rooms
No socket outlets/plugs in rooms
No hatching of floor plan
No ceiling light in passage
No dashed/hidden detail lines
shown between living/dining/kitchen
ANY TWO OF THE ABOVE
Which natural feature is indicated on Trees/Shrubs 1
19.
the site plan?
What is wrong with the electrical The light switch is fitted on the
20. installation in the bathroom in inside of the bathroom/Switch is 1
FIGURE B? incorrectly placed.
21. Identify number 10. Ramp 1
Sink–double bowl/
22. Identify number 11. 1
Double bowl sink/Double sink
23. Identify number 12. Two-way switch 1
One-way switch single-pole/One-
24. Identify number 13. 1
way switch/Single-pole switch
25. Draw the symbol of a socket outlet. 2
26. Draw the symbol for a shower.
2
2
Draw the symbol for a wall-mounted
27.
light.
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 8 DBE/November 2021
NSC – Marking Guidelines
Dressing room/Walk-in closet
En-suite/Bathroom
Gym/Gymnasium
Study/Office
28. Recommend TWO uses for ROOM A. 2
Store/Rest/Baby/Play/Games/
Guest/TV room
Laundry
ANY TWO OF THE ABOVE
24 500 – 5 000 – 9 000 –
3 000 – 5 000
Calculate the omitted horizontal = 2 500 mm
29. dimension on the site plan. Give your ANY OTHER CALCULATION 6
answer in mm. Show ALL calculations. METHOD TO ARRIVE AT THE
ANSWER
TOTAL: 40
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 9 DBE/November 2021
NSC – Marking Guidelines
QUESTION 3: CONSTRUCTION ASSOCIATED WITH CIVIL SERVICES, OHSA
AND QUANTITIES (SPECIFIC)
3.1 Two methods used to prevent inhaling of dangerous fumes:
Wear a respiratory mask.
Use an extractor fan to remove the fumes.
Use a blower to remove the fumes.
Ventilate manhole.
Wear a breathing apparatus like gas masks/oxygen tanks.
ANY TWO OF THE ABOVE (2)
3.2 Two aspects when setting out and excavating a trench:
The slope of the trench should be determined.
Invert levels must be correctly set out and verified.
Type of soil.
The excavation must be set out.
ANY TWO OF THE ABOVE (2)
3.3 Strut (1)
3.4 3.4.1 Concrete ring manhole (1)
3.4.2 Step irons
Reducer slabs
Cover slabs
Concrete lid/Lid/Steel cover/Manhole cover/
Concrete cover/Cover/Drain cover
ANY ONE OF THE ABOVE (1)
3.4.3 Excavate the hole at least 300 mm wider than the manhole
rings.
Allow extra depth for the thickness of the base, below the
invert level of the drain.
Cast the concrete base. (3)
3.5 In sound, intact rock/Rock (1)
3.6 The slope of cuttings in permanent excavations shall not be steeper than
1:2.
The excavation shall be sloped so that no water ponds within 3 m of the
toe of the cutting.
Surface water shall be diverted away and prevented from running down
the cut and causing erosion.
ANY TWO OF THE ABOVE (2)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 10 DBE/November 2021
NSC – Marking Guidelines
ANSWER SHEET 3.7
3.7
A B C D
NUMBER OF BRICKS
2/ 6,22 m
1,2 m
(8)
50 746,4 bricks 747 bricks
OR
1/ 6,22 m
1,2 m
100 746,4 bricks 747 bricks
OR
AREA OF WALLS
1/ 6,22 m Centre line of walls = 6,22 m
1,2 m 7,46 m² Height of wall for manhole = 1 200 mm
Area of walls is 7,46 m²
3 Marks
NUMBER OF BRICKS
2/ 7,46 Area of walls = 7,46 m²
50 746,4 bricks Height of wall for manhole = 1 200 mm
50 bricks per m² for a ½ wall
747 bricks are needed
5 Marks
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 11 DBE/November 2021
NSC – Marking Guidelines
3.8 3.8.1 Header course (1)
3.8.2 Queen closer/Closer (1)
3.8.3
¼ ¼ QUEENCLOSER
STRETCHER COURSE
HEADER COURSE
ASSESSMENT CRITERIA MARK
Correctness of drawing:
Queen closers 2
Header course 2
Stretcher course 3
TOTAL: 7 (7)
[30]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 12 DBE/November 2021
NSC – Marking Guidelines
QUESTION 4: HOT- AND COLD-WATER SUPPLY, TOOLS, EQUIPMENT AND
MATERIALS (SPECIFIC)
4.1 4.1.1 E
4.1.2 I
4.1.3 B
4.1.4 H
4.1.5 D
4.1.6 C
4.1.7 J
4.1.8 A (8)
4.2 Using the same type of material throughout a system.
Use a non–metallic coupler when joining galvanised pipes to copper
pipes. (2)
4.3 4.3.1 To control water coming into the cistern/regulate the water level. (1)
4.3.2 When the water level drops, the lever arm with the ball also
drops and opens the valve.
As water enters the system, the water level rises and the lever
arm with the ball also rises.
The lever arm pushes against the plunger and closes the
valve. (3)
4.4 4.4.1 135° bend with inspection eye. (1)
4.4.2 Allows access to the pipeline
Allows for inspection
Clearing/Cleaning of blockages
ANY TWO OF THE ABOVE (2)
4.5 This unit has a LED sensor that shuts off the water flow when it detects no
movement under the showerhead. (2)
4.6 4.6.1
WH
(2)
4.6.2
OR
M (2)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 13 DBE/November 2021
NSC – Marking Guidelines
4.7 3 (1)
4 (1)
2 (1)
5 (1)
1 (1)
4.8 Airlocks: Is caused by air (gas) that is trapped in a high point of the hot water
system.
Water hammer: Is the noise and hammering of water pipes caused by poor
installation of pipes/loose pipes. (2)
4.9 4.9.1 Test and replace thermostat, if faulty.
Test and replace safety valve if faulty.
Clean the safety valve/thermostat sleeve.
ANY ONE OF THE ABOVE (1)
4.9.2 Clear blockages in pipes.
Clear blockages in valves.
Replace low pressure geyser with high pressure geyser.
Replace faulty valves.
Install a pressure pump/pump (1)
ANY ONE OF THE ABOVE
4.10 Solar geyser should be placed on the roof of the dwelling/facing north in direct
sunlight.
High pressure electric geyser can be placed in the ceiling/against the external
wall/on the floor. (2)
4.11 4.11.1 Pipe-thread cutting machine (1)
4.11.2 The reamer is used to clean out the burr after the pipe has been
cut. (1)
4.11.3 To prevent accidental starting of the machine/injuring workers. (1)
4.12 Drain cleaning rods/Jetting machine/Drain cleaning machine (1)
4.13 When the blocked water starts to flow. (1)
4.14 Drain cleaning machine
Jetting machine
ANY ONE OF THE ABOVE (1)
[40]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 14 DBE/November 2021
NSC – Marking Guidelines
QUESTION 5: GRAPHICS AS MEANS OF COMMUNICATION, ROOF WORK AND
STORM WATER (SPECIFIC)
5.1 Discomfort of occupants or public.
Loss of life.
Damage to properties.
Pollution of the environment.
Negative environmental impact/Soil erosion.
Will overflow/Cause flooding/Cause blockages.
ANY TWO OF THE ABOVE (2)
5.2
STOPPED
END
GUTTER GUTTER CLIPS GUTTER FASCIA BOARD
OUTLET
DOWNPIPE WALL
DRAWING NOT TO SCALE
USE A MASK TO MARK THIS QUESTION.
DOWN PIPE AND SLOPE CAN BE DRAWN ON THE OTHER SIDE OF THE WALL
AS WELL.
APPLICATION OF SCALE:
ASSESSMENT CRITERIA MARKS
Correctness of drawing:
Gutter 1
Slope of gutter 1
Gutter clips 2
Stopped end 2
Gutter outlet 1
Square downpipe 1
Application of scale 1
TOTAL: 9
(9)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 15 DBE/November 2021
NSC – Marking Guidelines
5.3
A
6
3
2
4
2 3
2 2
4
1
5
5
5
5 4
5
6
5
5
NO ASSESSMENT CRITERIA MARK A MAXIMUM OF 17 MARKS
WILL BE AWARDED IF THE
Correctness of drawing:
DEVELOPMENT OF PIPE A
1 Dividing circle in 12 parts (top
1 WAS NOT CORRECTLY
view)
PROJECTED.
2 Projection lines 4
3 Dividing circumference plan view
A MAXIMUM OF 5 MARKS
into 12 parts (Any acceptable
2 WILL BE AWARDED IF PIPE A
method)
WAS NOT DEVELOPED (1
4 Outside lines of base and sides 3 MARK - DIVIDING CIRCLE; 2
5 Outside lines of development 7 MARKS - VERTICAL
6 3 mm seam on both sides 2 PROJECTION LINES; 2
TOTAL: 19 MARKS - DIVIDING (19)
CIRCUMFERENCE) [30]
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 16 DBE/November 2021
NSC – Marking Guidelines
QUESTION 6: SEWERAGE, SANITARY FITTINGS AND JOINING (SPECIFIC)
6.1 6.1.1 B (1)
6.1.2 B (1)
6.1.3 C (1)
6.1.4 A (1)
6.1.5 A (1)
6.2 6.2.1 Flux:
Cleans the joint/pipe.
Allows solder to flow around joint/adhere to the joint.
Prevents oxidation.
ANY ONE OF THE ABOVE (1)
6.2.2 Heat the joint and apply solder to complete the joint. (2)
6.3 6.3.1 Compression T-joint/T-joint/ T (1)
6.3.2 Compression ring/Ferrule (1)
6.3.3 The compression ring tightens against the compression nut and
threaded piece to form a watertight joint/Prevent leak. (1)
6.4 Solvent weld/PVC weld/PVC adhesive/PVC glue/PVC cement (1)
6.5 Ensure that the pipe installation is protected from any external
pressure.
Pipes must be easily fixed in case of a leak, without causing damage to
the building.
Plastic pipes should not be rigidly encased in floors, concrete slabs or
walls.
Plastic pipes passing through a wall should preferably be installed inside
a sleeve.
Where a sanitary drainpipe and a pipe that conveys potable water are
laid underground horizontally next to each other, they shall be laid at
least 500 mm apart.
When a sanitary drainpipe and a pipe that conveys potable water cross
each other, the pipe that conveys the water shall be laid at least 100 mm
above the line of the sockets of the drainpipe.
In the case of pipework with flexible joints, adequate measures shall be
taken to prevent movement of the pipework due to water pressure
effects. Thrust blocks shall be designed and installed in accordance with
SANS 1200 L.
ANY ONE OF THE ABOVE (1)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 17 DBE/November 2021
NSC – Marking Guidelines
6.6 6.6.1 A - Receives solid waste for decomposition.
B - Stores excess water until discharged into the French drain. (2)
6.6.2 The purpose of the manhole cover is to:
Gain access to the septic tank.
Inspect the septic tank.
Clean the septic tank.
To prevent people from falling into the manhole.
To prevent foul gasses from escaping.
ANY ONE OF THE ABOVE (1)
6.6.3 Bacteria (1)
6.6.4 The soap and chemicals in the water will kill/disturb the
bacteria.
Septic tank and French drain will become saturated, and
drains will block/overflow.
Solid waste will not decompose.
ANY ONE OF THE ABOVE (1)
6.6.5 French drain (1)
6.7 The pipe fittings when connected to pipes must be:
Made of suitable material.
Watertight under normal working conditions.
Able to withstand internal water pressure of 50 kPa and external pressure
of 30 kPa.
ANY TWO OF THE ABOVE (2)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 18 DBE/November 2021
NSC – Marking Guidelines
ANSWER SHEET 6.8
IE
WC
IE
VP
IE
RE
IE IE
RE
HWB
B
IE
S
G
IE
IE WC
VP
ASSESSMENT CRITERIA MARK
Correctness of drawing:
RE
Branch pipes (ANY TWO) 2
Vent pipe 2
Gully 1
GULLY CAN BE PLACED AT THE KITCHEN OR
Junction of two main sewer pipes 2
THE BATHROOM
Rodding eyes 3
ALTERNATIVE ABBREVIATION FOR VENTPIPE
Inspection eyes (ANY THREE) 3
IS VV/SVP
TOTAL: 13
CURVES AT MAIN SEWER PIPES CAN BE
REPLACED BY A 45° LINE
(13)
Copyright reserved Please turn over
Downloaded from hlayiso.com
Civil Technology: Civil Services 19 DBE/November 2021
NSC – Marking Guidelines
6.9
H C H C
OR
W
MIXER TAP
ASSESSMENT CRITERIA MARK
Correctness of drawing:
Hot and cold-water inlet pipes 2
Cold water stopcock 1
Hot water stopcock 1
Direction of flow in all pipes 1
Shower rose 1
TOTAL: 6 [40]
TOTAL:: 200
Copyright reserved
Study this subject
Recommended for this subject
%20Eng_hlayiso.com_--dcb7f976-b3d6-42a9-b2b1-44ae9b2d8e3f/v1-323df2bd04b35e089240/card.webp)
Question paper
Civil Technology Grade 12 NSC November 2021 QP (Eng)
%20Eng_hlayiso.com_--f39d7571-db9f-4ded-b5e7-27008235ca8b/v1-4efe03b2e24afe8e530e/card.webp)
Question paper
Civil Technology Grade 12 NSC November 2021 QP (Eng)

Memorandum
Civil Technology Grade 12 Eastern Cape Mock 2021 Memo (Eng)
%20%20MG%20Afr_hlayiso.com_--42b5315c-825c-40e3-b394-85e0253fc0fb/v1-6058b260e68654519cc3/card.webp)
Memorandum
Civil Technology Grade 12 NSC November 2023 Memo (Afrikaans)
%20Memo%20Eng_hlayiso.com_--f06cef7f-235e-45f7-9f9b-f8e6a2b0c0ca/v1-45ae92f9d9d194afe959/card.webp)
Memorandum
Civil Technology Grade 12 NSC November 2020 Memo (English)
%20Memo%20Afr_hlayiso.com_--8cffc125-69c0-44e9-b0eb-88ae7e930363/v1-fca2156d2557644edb35/card.webp)
Memorandum
Civil Technology Grade 12 NSC November 2020 Memo (Afrikaans)
More from Grade 12 Civil Technology
%20(English%20and%20Afrikaans)%20June%202025%20Question%20Paper--c8edd459-5237-48e0-8588-69d7ecd7f8e5/v1-be996aaed91bf782e098/card.webp)
Question paper
Civil Technology Grade 12 Gauteng June 2025 QP (Afr)
%20Afr--591d6ffd-20b1-4748-a1ba-b055be0a14c3/v1-4d98a131fd37e013458a/card.webp)
Question paper
Civil Technology Grade 12 NSC June 2025 Question Paper (Afr)
%20Afr--05a95faf-5891-4d88-9e5e-7d13c1d21648/v1-f5ca67113376f7457b83/card.webp)
Question paper
Civil Technology Grade 12 NSC November 2025 QP (Afr)

Question paper
Civil Technology Grade 12 Eastern Cape Prelim 2024 QP (Afr)

Question paper
Civil Technology Grade 12 Eastern Cape Prelim 2024 QP (Eng)
%20Afr--eefaae29-fe93-4b75-8223-87bf4f3fc14c/v1-3553acfa446acbaa2a45/card.webp)
Question paper