Downloaded from hlayiso.com
NATIONAL
SENIOR CERTIFICATE
GRADE 12
SEPTEMBER 2021
CIVIL TECHNOLOGY: WOODWORKING
MARKING GUIDELINE
MARKS: 200
This marking guideline consists of 12 pages.
Skip to contentAll 2021 papers 





View all%20Afr--05a95faf-5891-4d88-9e5e-7d13c1d21648/v1-f5ca67113376f7457b83/card.webp)

%20Afr--eefaae29-fe93-4b75-8223-87bf4f3fc14c/v1-3553acfa446acbaa2a45/card.webp)
%20Afr--307147a5-3280-4a11-a82e-cf3e33388eb0/v1-e53e38093df191bfe243/card.webp)
%20Eng_hlayiso.com_--e6743728-8140-42ae-838d-282654a975a5/v1-dce3e047e0d7ad60a32b/card.webp)
%20Afr_hlayiso.com_--b820ac91-947c-4aed-821f-256aa13aabe1/v1-3be01795eace6f81b174/card.webp)
Civil Technology Grade 12 Eastern Cape Mock 2021 Memo (Eng)
Grade 12 Civil Technology memorandum from the Eastern Cape Mock Exam 2021 (English), 12 pages. Read online or download the free PDF.
Civil Technology · Grade 12 · Eastern Cape Mock Exam · 2021 · English. Memorandum, 12 pages. Read online or download the PDF.
- Subject
- Civil Technology
- Grade
- Grade 12
- Language
- English
- Document type
- Memorandum
- Year
- 2021
- Exam period
- Eastern Cape Mock Exam
- Curriculum
- CAPS
- Pages
- 12
- File size
- 218.0 KB
Free to read online, no sign-up needed
Loading document…
Loading document…
1 of 12
This exam
Document textSearch extracted text and jump to a page.
Downloaded from hlayiso.com
2 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2021)
INSTRUCTIONS FOR THE MARKERS
1. Markers should:
• Familiarise themselves with the question and answer before evaluating the
responses of candidates.
• Always interpret the responses of the candidates within the context of the
question.
• Consider any relevant and acceptable answer during pre-marking but should
strictly adhere to the answers after finalisation of the marking guideline.
• There are two approaches to answering questions, these are (1) to describe
and (2) to explain.
• If a candidate is required to explain e.g., a process in 4 steps, only the first 4
responses should be considered.
• If, however a candidate is required to e.g., explain or describe how to transfer
heights from one point to another using a transparent pipe level we need to
consider that candidates may write a long description not necessarily well
organised as an intellectual response may do. In this case the marker needs to
evaluate the complete statement to judge if the candidate explained the
required outcome satisfactorily and allocate marks on merit. The marker should
apply his/her professional judgement with these types of questions.
• Mark what the candidate wrote and do not award marks for answers that the
marker thinks the candidate meant with what was written.
• Indicate the tick or cross right at the position where the mark needs to be
awarded or where the candidate made the error.
• Accept the letter corresponding with the correct answer as well as the answer
written in full in multiple-choice questions.
• Accept incorrect spelling in one-word answers unless the spelling changes the
meaning of the answer.
2. For calculations:
• A mark is only awarded if the correct unit is written next to the answer.
• If TWO marks are awarded ONE mark is awarded for the answer and ONE
mark for the correct unit.
• Where the candidate made a principle error e.g. added instead of multiplying,
no marks will be awarded for the steps. If the answer is correct according to
what the candidate did, the mark for the answer can be awarded for the
application of skills.
• Where an incorrect answer could be carried over to the next step, the first
answer will be deemed incorrect. However, should the incorrect answer be
carried over correctly, the marker has to recalculate the values, using the
incorrect answer from the first calculation. If correctly used, the candidate
should receive the full marks for subsequent calculations.
• Markers should consider when and where a candidate has rounded off in a
calculation, as well as the subsequent effect it has on the final answer obtained.
The calculation should therefore be awarded marks on merit.
• Alternative methods of calculations must be considered, provided that the
correct answer is obtained.
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2021) CIVIL TECHNOLOGY: WOODWORKING 3
3. When marking drawings:
• The member for which the mark should be awarded should be drawn correctly
in the correct position to receive a mark.
• A member incorrectly drawn but wrongfully repeated in another position will be
awarded the mark for the repeated incorrect member provided that the marking
guideline provide for TWO or more marks for that member (positive marking).
• Marks can only be awarded for a label if the label is correctly indicating the
correct member.
• Scale drawings should always be marked using an appropriate mask.
When a candidate drew the wrong drawing e.g.:
• A horizontal section instead of a vertical section, no marks will be allocated to
the drawing as the candidate did not respond to the expected outcome.
• An orthographic view instead of sectional view, no marks will be allocated to
the drawing as the candidate did not respond to the expected outcome.
• An orthographic view instead of an isometric view, no marks will be allocated
to the drawing as the candidate did not respond to the expected outcome.
• If the incorrect drawing was drawn, the candidate can be awarded for only what
was asked but mark/s for the correctness of the drawing will not be awarded
e.g., if a King Post roof truss was asked in the question, and candidate drew
SA-Howe Truss.
Copyright reserved Please turn over
Downloaded from hlayiso.com
4 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2021)
QUESTION 1: SAFETY AND MATERIALS (GENERIC)
1.1 Answer the following question regarding scaffolding.
1.1.1 A – Guardrail (1)
B – Planks / Working platform (1)
C – Kickboard / Toe-board (1)
D – Brace (1) (4)
1.1.2 228 mm (1) x 38 mm (1) (2)
1.1.3 Provides stability to the scaffolding. (1)
1.1.4 Minimum = 900 mm (1) and maximum = 1 000 mm (1). (2)
1.2 1.2.1 Placing of building rubble:
• May not obstruct access or exits
• Safe place
• Regularly removed. (Any 1 x 1) (1)
1.2.2 When materials are transported to higher surfaces:
• Workers must maintain a safe distance /
• Overhead protection. (Any 1 x 1) (1)
1.3 Any THREE:
• Non-skid devices on the bottoms
• Hooks at the upper ends
• Lashed, secure or fastened
• Held by someone (Any 3 x 1) (3)
1.4 Rungs (1)
1.5 The coating of a metal by electrolysis (1) with a thin layer of another metal.
(1) (2)
1.6 To improve the metal’s corrosion resistance. (1)
1.7 Any TWO:
• Adds strength to the metal
• Galvanised metals are thicker
• Galvanised nails and screws prevents staining (Any 2 x 1) (2)
[20]
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2021) CIVIL TECHNOLOGY: WOODWORKING 5
QUESTION 2: GRAPHICS, JOINING AND EQUIPMENT (GENERIC)
2.1 FIGURE 2.1 on ANSWER SHEET A shows a floorplan of a storeroom on
scale 1 : 50. Draw the south elevation on scale 1 : 50 on ANSWER
SHEET A from the given ground level, by using the following information:
• The floor level height is 200 mm above the ground level
• Wall height is 2 600 mm from the floor level to the ceiling
• Window 1 is 1 200 x 900 mm
• Door 1 is 1 100 x 2 100 mm
• Doorknob
• Roof construction pitch is 30°
• Show construction lines to determine the roof height
• Gable end at the west elevation
• Hippen end at the east elevation
Use the marks table on ANSWER SHEET A as reference. (29)
2.2 A – Nut with built-in washer like a flange (1)
B – Wing nut (1)
C – Domed top nut (1) (3)
2.3 Any TWO:
• Resist pull-out failure
• Excellent carrying capacity
• Tolerance to a variance in the hole size (Any 2 x 1) (2)
2.4 Must be set-up that the telescope (1) is placed on a comfortable
sightline, (1) to prevent a person from bending or stretching over the
telescope and tripod. (1) (3)
2.5 Any THREE:
• Wiring
• Wood
• Metal studs
• Copper pipes
• Plumbing work (Any 3 x 1) (3)
[40]
TOTAL SECTION A: 60
Copyright reserved Please turn over
Downloaded from hlayiso.com
6 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2021)
QUESTION 3: CASEMENTS, CUPBOARDS, WALL-PANELLING AND
QUANTITIES (SPECIFIC)
3.1 3.1.1 520 mm – 570 mm (1)
3.1.2 Rebate (1)
3.1.3 Cornice (1)
3.2 3.2.1 A – Top rail
B – Drip groove/throat
C – Transom
D – Drip groove/throat
E – Bottom rail of fanlight
F – Putty
G – Ovolo moulding
H – Windowpane/glass (8 x 1) (8)
3.2.2 Prevents rainwater being blown into the casement and penetrating
the room. (1)
3.3 A – Top shelf/storage space
B – Hanging space
C – Shelving
D – Drawer unit (4 x 1) (4)
3.4 • Melamine is waterproof
• Easy to clean
• Durable
• Smooth finish
• Improves appearance (Any 2 x 1) (2)
3.5 Built-in-cupboards fastened against a wall. (1)
Free standing it is moveable and can stand anywhere. (2)
3.6 3.6.1 A – 110 mm thick wall
B – Horizontal rough grounds
C – Tongue-and-groove board
D – Moulded skirting
E – Quadrant
F – Floor covering (6 x 1) (6)
3.6.2 • No wall plastering needed
• Serves to enhance the aesthetic appeal of a room (2)
3.6.3 Using nails or wall anchors or screws (1)
[30]
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2021) CIVIL TECHNOLOGY: WOODWORKING 7
QUESTION 4: ROOFS, CEILINGS, TOOLS AND EQUIPMENT, AND
MATERIALS (SPECIFIC)
4.1 4.1.1 C (1)
4.1.2 A (1)
4.1.3 D (1)
4.1.4 E (1)
4.1.5 F (1)
4.2 • Gypsym ceiling board
• Coverstrip
• Trapdoor panel
• Tie beam (Any 2 x 1) (2)
4.3 1. Sand the surface with different grade of sandpaper
2. Sand until surface is free of scratches and smooth.
3. Remove all the dust. (3)
4.4 Truss hanger is a U-shaped fastener; the roof timber member rest in the
‘U’. (1)
Gang nails is a steel plate punched to form a nail pattern and is
prefabricated to be used in roof trusses. (1)
4.5 • Strength
• Density (2)
4.6 4.6.1 Hipped roofs are pitched roofs that slope downward on all sides. (1)
4.6.2 Hipped roof with valley; A valley is formed when two inclined roof
surfaces meet at an internal angle. (1)
4.7 Always wear safety goggles.
• Wear a dusk mask when using the belt sander.
• Inspect the power cord regularly for damage.
• A void carrying the machine by the cord. (2)
4.8 4.8.1 Mechanical and visual grading are two methods. The head of
each timber board is marked in cinnamon red letters and
numbers. (2)
4.8.2 The strength (2)
4.8.3 South African Bureau of Standards (1)
Copyright reserved Please turn over
Downloaded from hlayiso.com
8 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2021)
4.9 4.9.1 A – Rafter joist
B – Hip/corner rafter
C – Wall plate
D – Ceiling joist
E – Jack rafter (5)
4.9.2 A roof with two slanting ends, sometimes across a short, flat
gable. (2)
4.10 • Resist weather conditions such as wind and rain.
• Look durable and enhances the appearance of the building.
• Is fire resistant.
• Provides insulation against heat and cold. (Any 2 x 1) (2)
4.11 Batten 38 mm x 38 mm, placed and attached at right angles to the rafters
onto which concrete tiles or slates are fixed. (1)
Purlin 50 mm x 76 mm, placed and attached perpendicular to the roof
sheeting materials. (1)
4.12 • Provides a highly effective barrier against the ingress of wind-driven
rain and dust.
• Allows the rain that is blown in under the tiles to flow to the gutters.
• Lowers the suction pressure under the tiles and reduces the risk of
wind lifting the tiles.
• Acts as a thermal barrier by improving insulation. (6)
[40]
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2021) CIVIL TECHNOLOGY: WOODWORKING 9
QUESTION 5: CENTRING, FORMWORK, SHORING AND GRAPHICS AS
MEANS OF COMMUNICATION (SPECIFIC)
5.1 • Block board
• Laminated board
• Shutter board and
• Plywood (Any 1 x 1) (1)
5.2 5.2.1 • For the placing of the reinforcing bars.
• To facilitate the casting of the concrete.
• To ensure that it is thoroughly rammed into the column and the
fourth side can consist of shorter lengths. (3)
5.2.2 A – Sides
B – Wedges
C – Yokes
D – Cleats
E – Bolts (5)
5.2.3 To secure the formwork. (1)
5.3 5.3.1 Nails used to secure the joint between the prop and needle. (1)
5.3.2 Made of timber to spread the weight transferred by the props over a
wider area. (1)
5.4 To provide temporary support to two parallel walls that are located between
9 metres and 15 metres apart, where one or both walls show signs of failure. (2)
5.5 Temporary timber framework is used to support a stone, brick or concrete
arch during construction. (3)
5.6 A – Ribs
B – Ties
C – Bearer
D – Laggings
E – Folding wedges
F – Horizontal brace (6)
5.7 5.7.1 Rib and block / Block and beam construction. (2)
5.7.2 A – In-situ concrete layer
B – Pre-cast hollow-core concrete blocks
C – Steel mat (3)
5.7.3 It is very strong and can carry heavy loads or weight. (2)
[30]
Copyright reserved Please turn over
Downloaded from hlayiso.com
10 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2021)
QUESTION 6: SUSPENDED FLOOR, STAIRCASES, IRON MONGERY
DOORS AND JOINING (SPECIFIC)
6.1 A vertical member supporting one end of a handrail at the top or bottom of a
flight of stairs, the strings and the handrails are fixed to it. (2)
6.2 Flight of stairs Runs in one direction and are uninterrupted flights of
with a landing: stairs that directly connects two floors.
Regulations stipulate that if there are more than 16
walkways in a straight step arm, landings must be
installed.
The signs allow the user to rest during the ascent and
are required where there is a steep rise between floor
levels. (3)
Stairwell with a Also known as U-shaped stairs.
half-landing: Landings serve as a resting place.
Has two parallel flights of stairs that are connected by a
landing that makes a 180° turn when one ascends or
descends.
Takes up less floor space than straight stairs. (3)
6.3 Overhang or edge of the tread and frequently projects over the riser below it. (2)
6.4 Night latch (1)
6.5 6.5.1 Mortised into the door stile (1)
6.5.2 Screwed onto the doorjamb (1)
6.5.3 Onto the doorjamb (1)
6.5.4 Onto the doorjamb (1)
6.6 Clearance to allow shrinkage and expansion of wood. (1)
6.7 6.7.1 A – Brace
B – V-tongue-and-groove battens
C – Stile (3)
6.7.2 To prevent the sagging of the door. (1)
6.7.3 Gives a neat appearance to the outside of the frame members. (1)
Copyright reserved Please turn over
Downloaded from hlayiso.com
(EC/SEPTEMBER 2021) CIVIL TECHNOLOGY: WOODWORKING 11
6.8
✓ ✓
Doorframe ✓
✓
✓
✓
✓ ✓ OR
Jamb lining
ASSESSMENT CRITERIA MARK
Walls 2
Frame profile of door 1
Jamb lining profile 1
Title 1
Architraves 1
TOTAL: 6
6.9 6.9.1 Double stub tenon and mortise joint (1)
6.9.2 A – Bottom rail
B – Haunch
C – Double stub tenon
D – Stile
E – Groove
F – Roove (6)
6.9.3 Thickness is 1/3 of thickness of wood. (1)
6.9.4 To join the bottom rail and stile of a panel door. (1)
6.10 Fixed or hinged (2)
[40]
TOTAL: 200
Copyright reserved Please turn over
Downloaded from hlayiso.com
12 CIVIL TECHNOLOGY: WOODWORKING (EC/SEPTEMBER 2021)
CIVIL TECHNOLOGY
ANSWER SHEET A GENERICS
NAME:
2.1 FIGURE 2.1 shows the floorplan of a storeroom on scale 1 : 50.
Draw the south elevation on scale 1 : 50 on ANSWER SHEET A from
the given ground level. (29)
4 200
3 640
2 740 3 300
SCALE 1 : 50
Floor level 2
Wall 3
Pitch
Window 3
Windowsill 1
Door 4
Height
Stairs 1
Ramp 1
Fascial board 2
Gutter 1
Down pipe 1
Gable end 4
Hipped end 3
Roof height 3
NGL TOTAL: 29
Copyright reserved Please turn over
Study this subject
Recommended for this subject

Memorandum
Civil Technology Grade 12 Eastern Cape Mock 2021 Memo (Eng)

Question paper
Civil Technology Grade 12 Eastern Cape Mock 2021 QP (Eng)

Memorandum
Civil Technology Grade 12 Eastern Cape Mock 2022 Memo (Eng)

Memorandum
Civil Technology Grade 12 Eastern Cape Mock 2022 Memo (Eng)

Memorandum
Civil Technology Grade 12 Eastern Cape Mock 2017 Memo (Eng)

Question paper
Civil Technology Grade 12 Eastern Cape Mock 2023 QP (Eng)
More from Grade 12 Civil Technology
%20Afr--05a95faf-5891-4d88-9e5e-7d13c1d21648/v1-f5ca67113376f7457b83/card.webp)
Question paper
Civil Technology Grade 12 NSC November 2025 QP (Afr)

Question paper
Civil Technology Grade 12 Eastern Cape Prelim 2024 QP (Eng)
%20Afr--eefaae29-fe93-4b75-8223-87bf4f3fc14c/v1-3553acfa446acbaa2a45/card.webp)
Question paper
Civil Technology Grade 12 November 2024 NSC QP (Afr)
%20Afr--307147a5-3280-4a11-a82e-cf3e33388eb0/v1-e53e38093df191bfe243/card.webp)
Question paper
Civil Technology Grade 12 November 2024 NSC QP (Afr)
%20Eng_hlayiso.com_--e6743728-8140-42ae-838d-282654a975a5/v1-dce3e047e0d7ad60a32b/card.webp)
Question paper
Civil Technology Grade 12 NSC November 2023 QP (Eng)
%20Afr_hlayiso.com_--b820ac91-947c-4aed-821f-256aa13aabe1/v1-3be01795eace6f81b174/card.webp)
Question paper