NATIONAL
SENIOR CERTIFICATE
GRADE 12
CIVIL TECHNOLOGY: CONSTRUCTION
NOVEMBER 2024
MARKING GUIDELINES
MARKS: 200
These marking guidelines consist of 18 pages.
Copyright reserved Please turn over
Skip to contentAll 2024 papers %20Afr--eefaae29-fe93-4b75-8223-87bf4f3fc14c/v1-3553acfa446acbaa2a45/card.webp)
%20Afr--307147a5-3280-4a11-a82e-cf3e33388eb0/v1-e53e38093df191bfe243/card.webp)



%20%20MG%20Afr_hlayiso.com_--42b5315c-825c-40e3-b394-85e0253fc0fb/v1-6058b260e68654519cc3/card.webp)
View all%20(English%20and%20Afrikaans)%20June%202025%20Question%20Paper--c8edd459-5237-48e0-8588-69d7ecd7f8e5/v1-be996aaed91bf782e098/card.webp)
%20Afr--591d6ffd-20b1-4748-a1ba-b055be0a14c3/v1-4d98a131fd37e013458a/card.webp)
%20Afr--05a95faf-5891-4d88-9e5e-7d13c1d21648/v1-f5ca67113376f7457b83/card.webp)



Civil Technology Grade 12 November 2024 NSC Memo (English)
Grade 12 Civil Technology memorandum from the November 2024 NSC (English), 18 pages. Read online or download the free PDF.
Civil Technology · Grade 12 · November 2024 NSC · 2024. Memorandum. Read online or download the PDF.
- Subject
- Civil Technology
- Grade
- Grade 12
- Document type
- Memorandum
- Year
- 2024
- Exam period
- November 2024 NSC
- Curriculum
- CAPS
- Pages
- 18
- File size
- 344.6 KB
Free to read online, no sign-up needed
Loading document…
Loading document…
1 of 18
This exam
Document textSearch extracted text and jump to a page.
Civil Technology: Construction 2 DBE/November 2024
NSC – Marking guidelines
INSTRUCTIONS FOR MARKERS
1. Markers should:
• Familiarise themselves with the question and answer before evaluating
the responses of candidates.
• Always interpret the responses of the candidates within the context of the
question.
• Consider any relevant and acceptable answer during pre-marking but
should strictly adhere to the answers after finalisation of the marking
guideline.
• There are TWO approaches to answering questions; these are (1) to
describe and (2) to explain.
1. If a candidate is required to explain e.g., a process in 4 steps, only
the first 4 responses should be considered.
2. However, if for example candidate is required to explain or describe a
process, we need to consider that that candidates may write a long
description, not necessarily well organised. In this case the marker
needs to evaluate the complete statement to judge if the candidate
explained the required outcome satisfactorily and allocate marks on
merit.
• Mark what the candidate wrote and do not interpret or predict responses.
• Indicate the tick or cross right at the position where the mark needs to be
awarded or where the candidate made the error.
• Accept the letter corresponding with the correct answer as well as the
answer written in full in multiple-choice questions or similar questions.
• Accept incorrect spelling in one-word answers unless the spelling
changes the meaning of the answer.
• If a learner writes two or more answers separated by a slash (/) mark only
the first response, unless the additional answer/s are different names for
the same item e.g., Yale lock/Night latch. In this case, the answer for the
response should be awarded and the slash (/) should NOT be considered
as an additional answer.
2. For calculations:
• A mark is only awarded if the correct unit is written next to the answer. If
the question states that the answer must be in a specific unit, a mark will
ONLY be awarded if the answer has the correct unit as indicated in the
question.
• Marks will only be allocated for the correct values if the candidates add
instead of multiply. NO marks will be awarded for the calculations and the
answer.
Copyright reserved Please turn over
Civil Technology: Construction 3 DBE/November 2024
NSC – Marking guidelines
• Where an incorrect answer is correctly carried over, the marker must
recalculate the values, using the incorrect answer from the first
calculation. If correctly used, the candidate should receive the full marks
for subsequent calculations.
• Alternative methods of calculations must be considered, provided that the
correct answer is obtained.
• For the calculation of quantities marks will be awarded for the correct use
of the dimension paper.
3. When marking drawings:
• The member for which the mark should be awarded should be drawn
correctly in the correct position to receive a mark.
• A member incorrectly drawn but wrongfully repeated in another position
will be awarded the mark for the repeated incorrect member provided that
the marking guideline provide for TWO or more marks for that member
(positive marking).
• Marks can only be awarded for a label if the label is correctly indicating
the correct member.
• Scale drawings should always be marked using an appropriate mask.
• If the incorrect/wrong drawing was drawn, the candidate can be awarded
for only what was provided for on the marking guideline.
• If a two-dimensional drawing is required and a line
diagram/pictorial/isometric drawing is drawn, members will be marked
according to the assessment criteria and no marks will be awarded for
the correctness of the drawing.
• If candidates draw/give more information than what is required, mark
strictly according to the assessment criteria.
• The marks for the correctness of the drawing will only be awarded if the
entire drawing with all members/parts is drawn.
4. Incorrect numbering of questions:
• If a candidate numbered an incorrectly, but the answer is in the correct
position according to the sequence of the questions in the question
paper, circle then the incorrect numbering and mark the response.
• If questions were answered randomly not following the same sequence
as in the question paper and the learner numbered incorrectly, the
response should NOT be marked.
5. Duplication of responses and questions answered in the correct place:
• If a question is answered twice, mark the first response.
• If a question should be answered on an answer sheet and the candidate
answered it on both the answer sheet and in the answer book, mark the
response on the answer sheet and cancel the response in the answer
book.
• If the question was answered in the answer book instead of on the
answer sheet, mark the response in the answer book according to the
assessment criteria on the marking guideline.
Copyright reserved Please turn over
Civil Technology: Construction 4 DBE/November 2024
NSC – Marking guidelines
QUESTION 1: OHSA, MATERIALS, TOOLS, EQUIPMENT AND JOINING
(GENERIC)
1.1 1.1.1 3m✓ (1)
1.1.2 3m✓ (1)
1.1.3 Fire-fighting measures ✓ (1)
1.1.4 ensure that the ladder does not protrude excessively ✓ (1)
1.1.5 Powder coating ✓ (1)
1.1.6 the thickness of under size parts can be increased ✓ (1)
1.1.7 head and pin ✓ (1)
1.1.8 preventing backing off ✓ (1)
1.1.9 wood preservatives ✓ (1)
1.1.10 spiral ✓ (1)
1.2 B✓ (1)
1.3 Diameter of thread/Size of Rawl bolt ✓ (1)
1.4 Properties and advantages of cured concrete:
1.4.1 • Improves the protection of the steel reinforcement ✓
• Improves the protection against rust
ANY ONE OF THE ABOVE (1)
1.4.2 Cured concrete can carry more weight. ✓ (1)
1.5 A multi-detector can be used:
• to detect materials in or behind a wall/carpentry/plumbing/construction
surface. ✓
• to determine distances to and from an object.
ANY ONE OF THE ABOVE
A laser level can be used:
• to indicate horizontal and/or vertical levels/heights/slopes. ✓ (2)
Copyright reserved Please turn over
Civil Technology: Construction 5 DBE/November 2024
NSC – Marking guidelines
1.6 Uses of dumpy level:
• Determine differences between levels and vertical heights ✓
• Determine levels ✓
• Determine slopes
• Determine horizontal angles/angles
• Setting out of buildings
• Transferring levels and heights
• Determine the distance from the dumpy level to an object/telescopic staff
ANY TWO OF THE ABOVE (2)
1.7 Caring for the telescopic staff:
• The staff must always be folded when it is transported ✓
• Keep it in a bag to prevent damage/scratching of the graduation during
transportation ✓
• Ensure that the plastic or metal clips are in working order to keep the
sections in position
• Clean after use
• Store in a safe dry place
ANY TWO OF THE ABOVE (2)
[20]
Copyright reserved Please turn over
Civil Technology: Construction 6 DBE/November 2024
NSC – Marking guidelines
QUESTION 2: GRAPHICS AS MEANS OF COMMUNICATION (GENERIC)
NO. QUESTIONS ANSWERS MARKS
What is the measurement of the
1. 12 000 mm/12 m ✓ 1
dwelling facing Hibiscus Street?
2. Identify number 1. Manhole/MH ✓ 1
Identify the number indicating the
3. 4✓ 1
building line.
4. Identify number 2. Boundary line ✓ 1
5. Identify number 3. Driveway/Entrance/Exit ✓ 1
Write down the abbreviation for
6. RE ✓ 1
number 5.
Garage door:
7. Explain the purpose of number 6. 1
To enter/close/secure the garage ✓
How many fluorescent tubes are used
8. 1 x 40W /1/One ✓ 1
in number 7?
How many one-way switch single-pole
9. 4/Four ✓ 1
switches are in the dwelling?
How many built-in cupboards are in
10. 2/Two ✓ 1
the dwelling?
What is omitted in terms of electrical Switch socket outlets/Socket
11. 1
installation in the bedrooms? outlets/Wall plugs ✓
Access points:
• Sliding door/Lounge door/Door at
Name TWO access points into the Number 8/Number 8 ✓
12. 2
dwelling. • Garage doors/Rollup door/Door at
Number 6/Number 6 ✓
How do you know in which direction
13. By the direction of an arrow ✓ 1
the door at number 8 will open?
Bath/Bidet/Urinal/Vanity/Bathroom
Name ONE other fixture that can be
cabinet/Wash hand basin/Basin/
14. installed in the bathroom indicated by 1
Extractor fan/Heated towel rail ✓
number 9.
(Abbreviations is NOT accepted)
15. Identify number 10. Hot-water cylinder ✓ 1
Copyright reserved Please turn over
Civil Technology: Construction 7 DBE/November 2024
NSC – Marking guidelines
Which plot is on the eastern side of
16. Plot number 27/Number 27/27 ✓ 1
plot number 23?
How many inside doors are in the
17. 4/Four ✓ 1
building?
How many 2 600 mm x 1 400 mm
18. 3/Three ✓ 1
windows are in the building?
Who checked the drawing of the new
19. P Bot ✓ 1
dwelling?
No step ✓
Why will it be difficult to enter the No porch/stoep
20. dwelling at number 8 if the NGL is 1
300 mm lower than the FFL? No ramp
The door is at a higher level
Who was responsible for the printing
21. Frog printers ✓ 1
of the building plan?
Deduce from the notes column the
22. 14/04/2024 ✓ 1
date that revision 1 took place.
In which town will the new dwelling be
23. Malubu ✓ 1
erected?
✓
Draw the symbol for a sink unit – ✓ ✓
24. 5
double. ✓ ✓ OR
✓
25. Draw the symbol for hardcore filling. ✓ 2
25 000 ✓ + 25 000 ✓ + 30 000 ✓ +
Calculate the metres of clear-view
30 000 ✓ – 4 000 mm ✓
fencing that would be needed to fence
= 106 000 mm = 106 ✓m
plot number 23, excluding the
26. 6
driveway. OR
Give your answer in metres and show 25 + 25 + 30 + 30 – 4 = 106 m
ALL calculations.
39,6 m² ✓ = 6,6 m
The internal area of the garage is 6m✓
39,6 m². Calculate the internal length = 6 600 mm ✓
27. of number 11. OR 3
Give your answer in mm and show 39 600 000 mm²
ALL calculations. 6 000 mm
= 6 600 mm
TOTAL: 40
Copyright reserved Please turn over
Civil Technology: Construction 8 DBE/November 2024
NSC – Marking guidelines
QUESTION 3: ROOFS, STAIRCASES AND JOINING (SPECIFIC)
3.1 3.1.1 • An imaginary line that connects the nosing of the treads in a
flight of stairs.✓
• The slope/angle of the flight of stairs.
ANY ONE OF THE ABOVE (1)
3.1.2 A combination of balusters/vertical posts ✓ that holds up the
handrail.✓ (2)
3.1.3 The horizontal distance covered by the stairs. ✓ (1)
3.2 3.2.1 Anchor a roof truss to a brick wall with a:
• Hoop iron ✓
• Strap/Galvanised steel strap
• Galvanised steel wire
ANY ONE OF THE ABOVE (1)
3.2.2 Gang nail/Nail plate/Bolt and nut/Nails ✓ (1)
3.3 650 mm ✓ (1)
3.4 Roof covering:
• Corrugated iron sheets ✓
• Galvanised sheet metal
• IBR sheets
• Transparent sheets
• Corrugated fibre-cement sheets
• Polycarbonate sheets
• Plastic sheets
ANY ONE OF THE ABOVE (1)
Copyright reserved Please turn over
Civil Technology: Construction 9 DBE/November 2024
NSC – Marking guidelines
3.5
RAFTER
3
STRUT 4
2
1 2
1
QUEEN POST
APPLICATION OF SCALE 5 5
USE A MASK TO MARK THIS QUESTION
NO. ASSESSMENT CRITERIA MARK
1 Queen post 2
2 Strut 2
3 Connection of parts 1
4 Any ONE label 1
Application of scale:
5 All correct =2 2
ONE incorrect =1
TWO and more incorrect = 0
TOTAL: 8 (8)
Copyright reserved Please turn over
Civil Technology: Construction 10 DBE/November 2024
NSC – Marking guidelines
3.6
1 1
3
3
1 2 2 1
5 5
4 4
6 6
APPLICATION OF SCALE
USE A MASK TO MARK THIS QUESTION
NO. ASSESSMENT CRITERIA MARK
1 Rafters 4
2 Tie beam 2
3 King post 2
4 Overhang 2
5 Wall plates 2
Application of scale:
6 All correct =2 2
ONE or TWO incorrect =1
THREE and more incorrect = 0
TOTAL: 14 (14)
[30]
Copyright reserved Please turn over
Civil Technology: Construction 11 DBE/November 2024
NSC – Marking guidelines
QUESTION 4: EXCAVATIONS, FORMWORK, TOOLS, EQUIPMENT AND
MATERIALS (SPECIFIC)
4.1 4.1.1 Boom ✓ (1)
4.1.2 Ready-mix ✓ (1)
4.1.3 Workabality ✓ (1)
4.1.4 30 MPa ✓ (1)
4.1.5 Water ✓ (1)
4.2 4.2.1 D✓ (1)
4.2.2 C✓ (1)
4.2.3 A✓ (1)
4.2.4 D✓ (1)
4.2.5 B✓ (1)
4.3 The excavation will/may collapse ✓ (1)
4.4
1 1
POLING BOARDS
3 WALLING BOARDS 5
4
STRUT 5
2 2
FOLDING WEDGES
NO. ASSESSMENT CRITERIA MARK
1 Poling boards 2
2 Walling boards 2
3 Folding wedges 1
4 Strut 1
5 Any TWO labels 2
TOTAL: 8 (8)
Copyright reserved Please turn over
Civil Technology: Construction 12 DBE/November 2024
NSC – Marking guidelines
4.5 4.5.1 Concrete vibrator is used:
• to get rid of air pockets/voids in the concrete. ✓
• to bind concrete together properly.
• to ensure that concrete flows into the corners.
• to compact concrete.
ANY ONE OF THE ABOVE (1)
4.5.2 Portable concrete vibrator/Concrete vibrator/Vibrator ✓ (1)
4.6 Power trowel float/Power float ✓ (1)
4.7 4.7.1 Purpose of the cube test:
• To determine the compression strength of cured concrete ✓
• To test if concrete complies with the requirements of the
project specifications ✓
• To test the ability of concrete to resist the load
• To determine the quality of the concrete
ANY TWO OF THE ABOVE (2)
4.7.2 Tamping rod ✓ (1)
4.7.3 Procedure of conducting a cube test:
• Apply oil to the mould and baseplate after it was cleaned ✓
• Fill the cube with 50 mm layers of concrete at a time until it is
filled to the top ✓
• Compact each layer ✓
• Stroke each layer at least 25 times ✓
• Cure the moulds for 24 hours and immerse the cubes in water
for 28 days and test ✓ /Compression strength tests must be
carried out at 7, 14 and 28 days (5)
4.8 A. Shuttering board side ✓
B. Shutter board floor ✓
C. Fixing plate ✓
D. Cleat ✓
E. Beam/Joist ✓
F. Wedge ✓
G. Soffit-/Shutter board ✓
H. Bearer/Head tree ✓
I. Brace/Strut ✓
J. Prop/Strut ✓ (10)
[40]
Copyright reserved Please turn over
Civil Technology: Construction 13 DBE/November 2024
NSC – Marking guidelines
QUESTION 5: PLASTER AND SCREED, BRICKWORK AND GRAPHICS AS
MEANS OF COMMUNICATION (SPECIFIC)
5.1 5.1.1 The mixing ratio is 1: 1,5 :3 ✓ (cement, sand and water) (1)
5.1.2 Roughcast finish ✓ (1)
5.1.3 Mortar is forcefully splattered onto the wall with a block
brush/trowel. ✓ (1)
5.2 5.2.1 Purpose of skimming of plaster:
• A high quality, smooth surface ✓
• High quality surface
• Smooth surface
ANY ONE OF THE ABOVE (1)
5.2.2 Rubber trowel/Steel trowel/Wooden float ✓ (1)
5.3 Dry screed:
Dry screed is placed on a concrete floor that has already cured ✓ so there is
no direct bonding between the two layers. ✓ (2)
5.4 Materials for dry screed:
• Sand ✓
• Cement ✓ (2)
5.5 Advantages of beam filling:
• Prevent wind/dust/rain from blowing in under the roof ✓
• Prevent birds/other living creatures from nesting/perching in the roof ✓
• Improve the stability of the roofing rafters
• Provide good insulation
ANY TWO OF THE ABOVE (2)
5.6 Gauged arches:
• Bricks are wedge-shaped ✓
• Joints are rectangular shaped ✓ (2)
Copyright reserved Please turn over
Civil Technology: Construction 14 DBE/November 2024
NSC – Marking guidelines
5.7 WALL
EDGE COURSE
PAVING BRICKS
5 4
6
3
2 BEDDING 7
CONCRETE HAUNCH
1 SUB-BASE 7
SUBGRADE
NO. ASSESSMENT CRITERIA MARK
1 Sub-base 1
2 Bedding 1
3 Concrete haunch 1
4 Paving bricks 1
5 Edge course 1
6 Concrete symbol 1
7 Any TWO labels 2
TOTAL: 8 (8)
Copyright reserved Please turn over
Civil Technology: Construction 15 DBE/November 2024
NSC – Marking guidelines
5.8 FIRST COURSE
2
1 1 1
SECOND COURSE
3 3 3
4 4
NO. ASSESSMENT CRITERIA MARK
1 First course bricks of pier 3
2 Half brick-first course 1
3 Second course bricks of pier 3
4 ¾ bricks 2
TOTAL: 9 (9)
[30]
Copyright reserved Please turn over
Civil Technology: Construction 16 DBE/November 2024
NSC – Marking guidelines
QUESTION 6: REINFORCEMENT IN CONCRETE, FOUNDATIONS, CONCRETE
FLOORS AND QUANTITIES (SPECIFIC)
6.1 6.1.1 D✓ (1)
6.1.2 G✓ (1)
6.1.3 A✓ (1)
6.1.4 H✓ (1)
6.1.5 B✓ (1)
6.2 6.2.1 A – Cantilever beam ✓
B – Supported beam ✓ (2)
6.2.2 Advantage of reinforcement:
• The beam can handle heavier loads ✓
• Less concrete can be used to achieve the same strength
• Increases the strength of concrete (1)
ANY ONE OF THE ABOVE
6.2.3 Disadvantages of reinforcement:
• Is more expensive ✓
• Is time consuming ✓ (2)
6.2.4 Purposes of using spacers:
• To keep steel in position ✓
• To ensure the correct cover depth is obtained (minimum
concrete cover) ✓ (2)
Copyright reserved Please turn over
Civil Technology: Construction 17 DBE/November 2024
NSC – Marking guidelines
6.3 6.3.1 1
STEEL CABLE
2
STEEL PIPE-CASING 5
3
DROP HAMMER
4
4
CONCRETE PLUG 5
NO. ASSESSMENT CRITERIA MARK
1 Steel cable 1
2 Steel pipe casing 1
3 Drop hammer 1
4 Concrete plug and symbol 2
5 Any TWO labels 2
TOTAL: 7 (7)
6.3.2 Pile foundation is not needed when/where:
• Ground is stable/solid enough ✓
• There is no underground water ✓
• There is no soil erosion
ANY TWO OF THE ABOVE (2)
6.4 6.4.1 110 mm ✓ (1)
6.4.2 Safety factors after installation for rib-and-block floor:
• Ensure curing at least for 7 days ✓
• Allow for 28 days for setting of the concrete slab ✓
• Only remove the props after a compressive strength of 17 MPa
is reached
• Adhere to normal formwork striking times
• Ensure minimum movement after casting
• Normal activities can only continue after the concrete has set
properly
ANY TWO OF THE ABOVE (2)
Copyright reserved Please turn over
Civil Technology: Construction 18 DBE/November 2024
NSC – Marking guidelines
6.5 A B C D
6.5.1 1/ ✓ 34,12 ✓ Area of walls for superstructure before
deductions
2,7 ✓
92,12 m2 ✓ (4)
6.5.2
1/ ✓ 2 ✓ Area of door
0,9 ✓
1,8 m2 ✓ (4)
6.5.3
Total area of wall after deductions
= 92,12 m2 ✓ – 1,8 m2 ✓ = 90,32 m2 ✓ (3)
6.5.4
2/ ✓ 90,32 ✓
50 ✓ 9 032 ✓ Bricks needed (4)
OR
1/ 90,32
100 9 032 Bricks needed
Correct use of dimension paper ✓ (1)
[40]
TOTAL: 200
Copyright reserved
Study this subject
Recommended for this subject
%20Afr--eefaae29-fe93-4b75-8223-87bf4f3fc14c/v1-3553acfa446acbaa2a45/card.webp)
Question paper
Civil Technology Grade 12 November 2024 NSC QP (Afr)
%20Afr--307147a5-3280-4a11-a82e-cf3e33388eb0/v1-e53e38093df191bfe243/card.webp)
Question paper
Civil Technology Grade 12 November 2024 NSC QP (Afr)

Question paper
Civil Technology Grade 12 Eastern Cape Prelim 2024 QP (Afr)

Question paper
Civil Technology Grade 12 Eastern Cape Prelim 2024 QP (Eng)

Memorandum
Civil Technology Grade 12 Eastern Cape Mock 2023 Memo (Eng)
%20%20MG%20Afr_hlayiso.com_--42b5315c-825c-40e3-b394-85e0253fc0fb/v1-6058b260e68654519cc3/card.webp)
Memorandum
Civil Technology Grade 12 NSC November 2023 Memo (Afrikaans)
More from Grade 12 Civil Technology
%20(English%20and%20Afrikaans)%20June%202025%20Question%20Paper--c8edd459-5237-48e0-8588-69d7ecd7f8e5/v1-be996aaed91bf782e098/card.webp)
Question paper
Civil Technology Grade 12 Gauteng June 2025 QP (Afr)
%20Afr--591d6ffd-20b1-4748-a1ba-b055be0a14c3/v1-4d98a131fd37e013458a/card.webp)
Question paper
Civil Technology Grade 12 NSC June 2025 Question Paper (Afr)
%20Afr--05a95faf-5891-4d88-9e5e-7d13c1d21648/v1-f5ca67113376f7457b83/card.webp)
Question paper
Civil Technology Grade 12 NSC November 2025 QP (Afr)

Question paper
Civil Technology Grade 12 Eastern Cape Mock 2023 QP (Afr)

Question paper
Civil Technology Grade 12 Eastern Cape Mock 2023 QP (Afr)

Question paper